Generic XHP50 5-Mode LED USB Rechargeable Flashlight User Manual

1. Entwodiksyon

Mèsi pou acha aasing the Generic XHP50 5-Mode LED USB Rechargeable Flashlight. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new flashlight. Please read this manual thoroughly before use and retain it for future reference.

2. Enfòmasyon sou Sekirite

• Do not shine the flashlight directly into eyes. The powerful LED light can cause temporary vision impairment or damage.
• Kenbe flach la lwen timoun yo.
• Do not disassemble the flashlight. This may void the warranty and cause damage.
• Use only the provided charging cable or a compatible USB charger.
• Evite ekspoze flach la nan tanperati ekstrèm oswa nan limyè solèy dirèk pou peryòd pwolonje.
• Asire w pò chaje a sèk anvan ou konekte kab chaje a.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• 1x XHP50 LED Flashlight
• 1x USB chaje kab

4. Pwodwi souview

The Generic XHP50 Flashlight is a versatile and powerful illumination tool, featuring a high-brightness XHP50 LED, multiple lighting modes, and a USB rechargeable design. Its durable aluminum alloy body and adjustable focus make it suitable for various outdoor activities and general use.

Figi 4.1: Devan view of the Generic XHP50 LED Flashlight, showing the main body, head, tail cap, and attached lanyard.

5. Enstalasyon

5.1. Chaje flach la

Before first use, fully charge the flashlight. The flashlight is powered by a 26650 battery and supports USB charging.

1. Locate the USB charging port on the flashlight body. This is typically covered by a rubber flap to protect against dust and water.
2. Open the rubber flap and insert the smaller end of the provided USB charging cable into the flashlight's port.
3. Connect the larger end of the USB cable to a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port).
4. During charging, indicator lights on the flashlight will typically show the charging status. Once fully charged, the indicators will change or turn off.
5. After charging, disconnect the cable and securely close the rubber flap over the USB port to maintain water resistance.

Figure 5.1: The flashlight connected to a USB charging cable, illustrating the charging process.

Figure 5.2: Visual representation of various USB charging methods (USB socket, power bank, car charger, computer) and the battery capacity display on the flashlight.

6. Operasyon Enstriksyon

6.1. Limen/Etenn ak Seleksyon Mòd

The flashlight features 5 distinct lighting modes. The power button is typically located on the side or tail cap of the flashlight.

• Pou limen: Press the power button once. The flashlight will turn on in the last used mode or a default mode (e.g., Hard Light/High).
• Pou Chanje Mòd: While the flashlight is on, press the power button repeatedly to cycle through the 5 modes. The modes typically include: Limyè difisil (High brightness), Mwayen, Ba, Chòk (Strobe), and Pwòp tèt ou (SOS).
• Pou etenn: Press and hold the power button for approximately 2-3 seconds, or cycle through all modes until the flashlight turns off.

6.2. Adjusting Focus (Zoom)

The flashlight features an adjustable focus range, allowing you to switch between a wide floodlight and a concentrated spotlight beam.

• To adjust the focus, gently push or pull the head of the flashlight forward or backward.
• Pushing the head forward typically narrows the beam for a spotlight effect, increasing the lighting distance.
• Pulling the head backward typically widens the beam for a floodlight effect, illuminating a larger area.

Figure 6.1: Illustration of the flashlight's telescopic zoom function, showing its length in both retracted and extended positions and corresponding dimensions.

7. Antretyen

7.1. Netwayaj

• Siye kò flach la ak yon twal mou,amp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Kenbe lantiy la pwòp pou yon pwodiksyon limyè optimal. Sèvi ak yon twal netwayaj lantiy si sa nesesè.
• Ensure the charging port cover is free of dirt and debris.

7.2. Depo

• Sere flach la nan yon kote ki fre, sèk lwen limyè solèy la dirèk ak tanperati ekstrèm.
• If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.

NAN. Depanaj

Problem: Flashlight does not turn on.

Solisyon: Ensure the battery is charged. Connect the flashlight to a USB power source and check if the charging indicators activate. If the battery is fully depleted, it may take a few minutes for the indicators to appear. Check for any loose connections if the tail cap is removable.

Problem: Flashlight does not charge.

Solisyon: Verify the USB cable is securely connected to both the flashlight and the power source. Try a different USB cable or power adapter. Ensure the charging port is clean and free of debris. The charging port cover should be fully open during charging.

Problem: Light output is dim or inconsistent.

Solisyon: The battery may be low; recharge the flashlight. Ensure the lens is clean. Check if the flashlight is in a lower brightness mode and cycle through the modes to select a brighter setting.

9. Espesifikasyon

10. Garanti ak sipò

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, please refer to the product packaging or contact your retailer. For technical support or inquiries, please contact the seller or manufacturer through your purchase platform.