Fanvil 8-Port 2-Wire PoE Switch

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Fanvil 8-Port 2-Wire PoE Switch (Model PN8). Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Pwodwi souview

The Fanvil PN8 is an 8-port 2-wire Power over Ethernet (PoE) switch designed to transmit both power and data over existing 2-wire cables. This unique capability simplifies installation, especially in environments where traditional Ethernet cabling is not feasible or cost-effective. It supports up to 8 PoE-enabled devices and can transmit data and power over distances up to 300 meters.

2.1 Karakteristik kle

• 8 PoE ports for data and power transmission.
• Supports power and data over 2-wire connections.
• Long transmission distance of up to 300 meters.
• User-friendly setup with no complex configuration required.

2.2 Layout Aparèy

Figi 1: Devan view of the Fanvil PN8 switch, showing 8 PLC ports, a WAN port, ON/OFF switch, and LED indicators for Network Reset and Power.

Figi 2: Angle view of the Fanvil PN8 switch, highlighting the side ventilation and port layout.

2.3 Endikatè ki ap dirije

• Network Reset (Green LED): Indicates network activity or status. A steady light typically means a stable connection, while blinking indicates data transmission.
• Power (Red LED): Illuminates when the device is powered on and receiving electrical current.

3. Enstriksyon Enstalasyon

3.1 Kontni pake a

Anvan enstalasyon an, tanpri verifye ke tout atik yo prezan nan pake a:

• Fanvil 8-Port 2-Wire PoE Switch (PN8)
• Adaptè pouvwa
• Manyèl Itilizatè (dokiman sa a)
• Pwodwi pou Montaj (si enkli)

3.2 Konekte switch la

1. Koneksyon pouvwa: Connect the provided power adapter to the power input port on the switch and then plug it into a standard electrical outlet (100-240V AC). Ensure the ON/OFF switch is in the OFF position before connecting power.
2. Koneksyon WAN: Connect your main network router or modem to the WAN port on the Fanvil PN8 switch using a standard Ethernet cable.
3. Koneksyon Aparèy PoE: Connect your 2-wire PoE-enabled devices (e.g., IP phones, cameras) to any of the 8 PLC ports on the switch. The switch will automatically detect and provide power and data to these devices.
4. Pouvwa sou: Flip the ON/OFF switch to the ON position. The Power LED should illuminate, indicating the switch is operational.

4. Itilizasyon switch la

Once connected, the Fanvil PN8 switch operates automatically. It provides power and data to connected PoE devices without requiring additional configuration. The LED indicators provide visual feedback on the device's status.

4.1 Limen/Etenyen

• To power on the switch, ensure the power adapter is connected and flip the ON/OFF switch to the 'ON' position. The red Power LED will light up.
• To power off the switch, flip the ON/OFF switch to the 'OFF' position. The red Power LED will turn off.

5. Antretyen

To ensure optimal performance and longevity of your Fanvil PN8 switch, follow these maintenance guidelines:

• Netwayaj: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
• Vantilasyon: Ensure the switch is placed in a well-ventilated area. Do not block the ventilation openings on the sides of the device.
• Anviwònman: Evite ekspoze switch la nan tanperati ekstrèm, imidite ki wo, oswa limyè solèy dirèk.

NAN. Depanaj

If you encounter issues with your Fanvil PN8 switch, refer to the following table for common problems and solutions:

7. Espesifikasyon teknik

8. Garanti ak sipò

Pou enfòmasyon sou garanti a ak sipò teknik, tanpri gade dokimantasyon ki vini ak acha ou a oswa vizite sit ofisyèl Fanvil la. website. Contact their customer service for assistance with product issues, repairs, or further inquiries.