1. Entwodiksyon
This instruction manual provides essential information for the safe and efficient operation of your Walfront Smart Home Floor Heating Thermostat. Please read this manual thoroughly before installation and use, and retain it for future reference. This electric underfloor heating thermostat is designed for precise temperature control in your home, offering smart features and user-friendly functions.
2. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- 1 x Electric Underfloor Heating Thermostat
- 1 x Sensor Probe
- 2 x Vis
- 1 x manyèl itilizatè
3. Espesifikasyon
| Kalite atik | Thermostat chofaj elektrik anba planche |
| Materyèl | PC Flame Retardant |
| Gwosè | Apeprè 86 x 90 x 13mm / 3.39 x 3.54 x 0.51 pous |
| Pwovizyon pou pouvwa | AC85V-250V 50 / 60Hz |
| Capteur Tanperati | Koefisyan Tanperati Negatif |
| Control Temperature Accuracy | ± 1℃ |
| Chaje aktyèl | ≤16A |
| Kòmanse Diferans Tanperati | 1 a 10 ℃ |
| Ranje Tanperati Floor | 5 to 65℃ / 41 to 149℉ |
| Mete Tanperati | +5 to +50℃ / +41 to +122℉ |
| Pwoteksyon tanperati ki wo | +5 to +65℃ / +41 to 149℉ |
| Montre Tanperati | -20 to +80℃ / -4 to +176℉ |
| Metòd enstalasyon | Mi monte |
4. Enfòmasyon sou Sekirite
- Always cut off the main power supply before any installation, wiring, or maintenance.
- Installation should be performed by a qualified professional or in accordance with local electrical codes.
- Do not install the thermostat in areas with direct sunlight, drafts, or near heat sources, as this may affect temperature readings.
- Ensure proper wiring connections to prevent damage to the device or electrical hazards.
- Keep the device dry and avoid exposure to moisture or liquids.
5. Gid Enstalasyon
The thermostat is designed for easy, wall-mounted installation. Follow these steps carefully:
5.1 Demonte
To access the wiring terminals, the front panel of the thermostat must be separated from the back plate.
- Locate the small groove on the side of the thermostat.
- Carefully insert a small flathead screwdriver into the groove and gently pry to lift the display part.
- Separate the display unit from the back mounting plate.
5.2 fil elektrik
Before wiring, ensure the main power supply to your heating system is turned off at the circuit breaker.
- Koneksyon pouvwa: Connect the main power supply wires to the
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.