Telwin Drive 1800 Kompressor

Telwin Drive 1800 Kompressor - Instruction Manual

Model: Drive 1800 Kompressor | Brand: Telwin

1. Entwodiksyon ak souview

The Telwin Drive 1800 Kompressor is a compact, multi-functional 12V lithium emergency starter designed for various vehicles including motorcycles, cars, campers, marine engines, and vans. This device integrates an air compressor for tire inflation, a power bank for electronic device charging, and a high-intensity LED light. It utilizes high-efficiency LiPo lithium batteries for quick and complete charging, ensuring a compact and lightweight design. This manual provides essential information for the safe and effective use of your device.

2. Enfòmasyon sou Sekirite

Li tout avètisman sekirite ak enstriksyon anvan ou sèvi ak pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

  • Pwoteksyon je: Toujou mete pwoteksyon pou je lè w ap travay ak pil.
  • Vantilasyon: Ensure adequate ventilation when charging or jump-starting to prevent accumulation of explosive gases.
  • Asid batri: Battery acid is corrosive. If contact occurs, flush immediately with water and seek medical attention.
  • Etensèl ak flanm dife: Kenbe etensèl, flanm dife ak materyèl ki ka fè lafimen lwen batri a ak demarè a.
  • Frozen Batteries: Pa janm eseye sote-kòmanse yon batri nan frizè.
  • Timoun: Kenbe aparèy la pa rive nan men timoun yo.
  • Enflasyon twòp: Do not over-inflate tires or other items. Follow manufacturer's recommended pressure.
  • Chalè: The compressor and hose may become hot during prolonged use. Allow to cool before handling.
  • Chaje: Use only the provided charging cable. Do not expose the device to rain or wet conditions.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

  • Telwin Drive 1800 Kompressor Unit
  • Starting Cables (Jump Start Clamps)
  • USB-C Chaje Kab
  • Removable Air Hose
  • 3 bouch gonfleman
  • Ka Depo
Telwin Drive 1800 Kompressor accessories including jump start cables, air hose, nozzles, and storage case.

Figure 3.1: Included accessories for the Telwin Drive 1800 Kompressor.

4. Karakteristik ak konpozan pwodwi yo

Familiarize yourself with the main components of your Telwin Drive 1800 Kompressor.

Devan view of the Telwin Drive 1800 Kompressor showing the control panel and display.

Figi 4.1: Devan view of the Telwin Drive 1800 Kompressor.

Retounen view of the Telwin Drive 1800 Kompressor showing USB-A output, USB-C input, and jump start port.

Figi 4.2: Dèyè view with charging and output ports.

Close-up of the control panel on the Telwin Drive 1800 Kompressor with power, mode, and light buttons.

Figi 4.3: Detaye view nan panèl kontwòl la.

  • Ekspozisyon LCD: Shows inflation modes, pressure readings, and battery status.
  • Bouton kontwòl: Power, mode selection, pressure adjustment (+/-), and LED light activation.
  • Pò Demaraj Rapid: For connecting the jump start cables.
  • USB-A Output (OUT: 5V==2.4A): Pou chaje aparèy elektwonik.
  • USB-C Input (IN: 5V==2A): For charging the Telwin Drive 1800 Kompressor unit.
  • Koneksyon Kawotchou Air: For attaching the removable air hose.
  • Limyè ki ap dirije: High-intensity light with multiple operating modes.

5. Enstalasyon

5.1 Premye chaj

Before first use, fully charge the Telwin Drive 1800 Kompressor. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The LCD display will indicate charging status. Charging time may vary.

5.2 Mete tiyo lè a an kontak

To use the compressor function, securely screw the removable air hose into the designated port on the device. Ensure a tight connection to prevent air leakage.

6. Operasyon Enstriksyon

6.1 Demare yon Veyikil

  1. Ensure the Telwin Drive 1800 Kompressor is sufficiently charged.
  2. Etenn ignisyon machin nan ak tout akseswa yo.
  3. Konekte a WOUJ pozitif (+) clamp nan tèminal pozitif (+) batri machin nan.
  4. Konekte a NWA negatif (-) clamp to a metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect directly to the negative battery terminal unless specified by the vehicle manufacturer.
  5. Asire clamps are securely attached and do not touch each other.
  6. Turn on the Telwin Drive 1800 Kompressor.
  7. Demarre machin nan. Si li pa demarre touswit, tann 30 segonn epi eseye ankò. Pa vire motè a pou plis pase 3 segonn pou chak tantativ.
  8. Yon fwa machin nan kòmanse, dekonekte imedyatman NWA negatif (-) clamp premyèman, lè sa a WOUJ pozitif (+) clamp.
Telwin Drive 1800 Kompressor connected to a car battery for jump starting.

Figure 6.1: Jump starting a vehicle using the Telwin Drive 1800 Kompressor.

6.2 Using the Air Compressor

  1. Ensure the air hose is securely attached to the device.
  2. Select the appropriate inflation nozzle and attach it to the air hose.
  3. Connect the nozzle to the item to be inflated (e.g., tire valve).
  4. Turn on the Telwin Drive 1800 Kompressor.
  5. Use the mode button to select the desired inflation mode (car, SUV, bicycle, inflatables, custom).
  6. Use the +/- buttons to set the target pressure. The LCD display will show the current and target pressure.
  7. Press the power button to start inflation. The compressor will automatically stop when the target pressure is reached.
  8. Disconnect the nozzle and air hose.
Telwin Drive 1800 Kompressor being used to inflate a car tire.

Figure 6.2: Inflating a car tire with the integrated compressor.

6.3 Itilizasyon kòm yon Bank Pouvwa

To charge electronic devices, connect your device's USB charging cable to the USB-A output port (OUT: 5V==2.4A) on the Telwin Drive 1800 Kompressor. The device will automatically begin charging.

6.4 Sèvi ak limyè ki ap dirije a

Press the dedicated light button on the control panel to cycle through the LED light modes:

  • Fixed Light: Pou ekleraj jeneral.
  • Limyè strobo: Pou fè siyal oswa pou atire atansyon.
  • S.O.S. Mode: Flashes the international S.O.S. signal.
Telwin Drive 1800 Kompressor with its LED light activated, illuminating a dark area.

Figure 6.3: The LED light in operation.

7. Antretyen

  • Rechaje: For optimal battery life, recharge the device every 3-6 months, even if not in use.
  • Netwayaj: Wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasives.
  • Depo: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
  • Filtè lè: Periodically check the air intake vents for dust or debris and clean if necessary to maintain compressor efficiency.

NAN. Depanaj

PwoblèmKòz posibSolisyon
Aparèy la pa vire.Batri ap vide.Chaje aparèy la nèt avèk kab USB-C a.
Machin nan pa ka demarre ak èd.Pa kòrèk clamp connection; vehicle battery too deeply discharged; device battery too low.Verifye clamp connections (red to +, black to chassis); ensure device is fully charged; consult vehicle manual.
Konpresè a pa ap gonfle.Air hose not securely attached; nozzle not properly connected; target pressure not set.Check all connections; ensure nozzle is firmly attached; set target pressure on the display.
Dirije limyè pa travay.Device battery is depleted; light button not pressed correctly.Charge the device; press the light button firmly to cycle modes.

9. Espesifikasyon

  • Modèl: Drive 1800 Kompressor
  • Manifakti: Telwin
  • Pwa atik: 2 Kilogram
  • Dimansyon pake: 25.8 x 12.7 x 11 cm
  • Nimewo Modèl: 829575
  • Max Ampepòk: 1800 A
  • Voltage: 12 Volts
  • Konpozisyon batri: Lithium-ion (LiPo)
  • Compressor Max Pressure: Jiska 3.5 bar
  • USB-A Sòti: 5V == 2.4A
  • USB-C Antre: 5V == 2A

10. Garanti ak sipò

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Telwin websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.