1. Entwodiksyon
This manual provides essential information for the safe and efficient operation of your OMTech 50W Fiber Laser Engraver. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.
2. Enfòmasyon sou Sekirite
WARNING: This product is a Class 2 laser device with an output power of 0.874 mW. Direct exposure to the laser beam can cause severe eye injury or skin damage. Always wear appropriate laser safety glasses when operating the machine.
- Pwoteksyon je: Always wear certified laser safety glasses designed for the 1064 nm wavelength during operation.
- Vantilasyon: Ensure adequate ventilation in the work area to dissipate fumes and particles generated during engraving.
- Materyèl ki ka pran dife: Do not engrave flammable or explosive materials. Keep the work area clear of such items.
- Ijans Stop: Familyarize w ak kote ak fonksyon bouton arè ijans lan.
- Sipèvizyon: Pa janm kite machin nan poukont li pandan operasyon an.
- Pwovizyon pou pouvwa: Konekte machin nan nan yon priz kouran ki gen tè epi ki gen vòltaj ki kòrèk la.tage.
3. Pwodwi souview
The OMTech 50W Fiber Laser Engraver is an all-metal body machine designed for high-precision and high-speed marking on various materials. It features a compact design and user-friendly operation.
Karakteristik kle:
- Segondè Precision: Achieves an accuracy of 0.001 mm for detailed engravings.
- Vitès gravur rapid: Up to 10,000 mm/s, significantly boosting productivity.
- Integrated Red Dot Pointer: Assists in precise focus adjustment with a single button press.
- Lajè konpatibilite: Supports EZCad2 and LightBurn software, compatible with Windows 7, 8, 10, 11, and macOS.
- Durable Laser Source: Offers a lifespan of over 100,000 hours.
- Generous Work Area: 5.9 x 5.9 inches (150 x 150 mm) marking area.
Figure 3.1: OMTech 50W Fiber Laser Engraver unit.
Figure 3.2: Illustration of the laser engraver's high accuracy, capable of 0.001 mm precision.
Figure 3.3: Comparison illustrating the ultra-fast engraving speed of fiber lasers (10,000 mm/s) compared to CO2 and Diode lasers.
4. Enstalasyon
4.1 Debalaj ak plasman
- Ak anpil atansyon retire tout eleman nan anbalaj la.
- Mete graveur a sou yon sifas ki estab, plat nan yon zòn ki byen ayere.
- Ensure sufficient space around the machine for operation and maintenance.
4.2 Koneksyon pouvwa
- Connect the power cable to the machine and then to a grounded electrical outlet.
- Ensure the power switch is in the 'OFF' position before connecting.
4.3 Enstalasyon lojisyèl
The OMTech 50W Fiber Laser Engraver is compatible with EZCad2 and LightBurn software. Install the preferred software on your computer using the provided installation media or by downloading from the official OMTech websit.
Figure 4.1: Software compatibility for LightBurn and EZCad2 across Windows (7, 8, 10, 11) and macOS.
4.4 Focus Adjustment (Red Dot Pointer)
The machine is equipped with a red dot pointer for easy focus adjustment:
- Place your material on the workbed.
- Press the focus button on the machine to activate the red dot pointer.
- Adjust the height of the laser head until the two red dots converge into a single, sharp point on the material surface. This indicates optimal focus.
Figure 4.2: The one-click autofocus system utilizing the red dot pointer for precise material focusing.
5. Operasyon Enstriksyon
5.1 Preparasyon Materyèl
- Clean the material surface to remove any dust or debris.
- Securely place the material on the workbed to prevent movement during engraving.
5.2 Pwosesis Gravure
- Design Creation/Import: Use EZCad2 or LightBurn to create your design or import an existing image file (supported formats: bmp, gif, jpg, jpeg, dxf, dst, ai).
- Paramèt Paramèt: Adjust laser power, speed, frequency, and other settings based on the material type and desired engraving effect. Refer to software documentation for detailed parameter guidance.
- Preview: Utilize the software's preview function to ensure the design is correctly positioned on the material.
- Kòmanse grave: Initiate the engraving process from the software. Monitor the machine closely during operation.
5.3 Materyèl Sipòte
The OMTech 50W Fiber Laser Engraver is suitable for marking a wide range of materials, including but not limited to:
- Metal: Gold, Silver, Brass, Aluminum, Stainless Steel, Titanium, Tungsten, Cast Aluminum.
- Non-Metals: Certain plastics, leather, paper, wood, brick, granite, marble, tile, glass (with specific preparation).
Figure 5.1: Visual representation of various materials compatible with the fiber laser engraver.
Figi 5.2: Egzamples of engraving results on diverse materials such as gold, silver, copper, stone, acrylic, leather, paper, stainless steel, aluminum, glass, plastic, and wood.
5.4 Rotary Axis Compatibility
The engraver supports rotary axis attachments for engraving on cylindrical surfaces like bottles, rings, and tubes. Refer to the rotary axis manual for specific setup and operation instructions.
Figure 5.3: Illustration of rotary axis compatibility for engraving on cylindrical objects.
6. Antretyen
- Netwayaj regilye: Keep the work area and the machine's exterior clean. Use a soft, dry cloth.
- Netwayaj lantiy: Periodically inspect and clean the laser lens using specialized lens cleaning solutions and wipes to maintain optimal laser performance.
- Griyaj vantilasyon: Ensure ventilation grilles are free from dust and obstructions to prevent overheating.
- Enspeksyon kab: Regularly check all cables for signs of wear or damage.
NAN. Depanaj
Seksyon sa a adrese pwoblèm komen ou ka rankontre. Pou pwoblèm ki pi konplèks, tanpri kontakte sèvis kliyan.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pwodiksyon lazè | Power not connected, emergency stop engaged, software error | Check power, release emergency stop, restart software/machine |
| Move kalite gravure | Incorrect focus, wrong parameters, dirty lens, material issues | Adjust focus, optimize parameters, clean lens, test on scrap material |
| Machin nan pa rekonèt pa òdinatè a | Driver issues, USB connection problem | Reinstall drivers, try different USB port/cable, restart computer |
8. Espesifikasyon
Figure 8.1: Detailed technical specifications of the OMTech 50W Fiber Laser Engraver.
| Karakteristik | Spesifikasyon |
|---|---|
| Lazè pouvwa | 50W |
| Longèdonn lazè | 1064 nm |
| Marking Zòn | 5.9 x 5.9 pous (150 x 150 mm) |
| Max. Gravure vitès | 10,000 mm/s |
| Marking Presizyon | ± 0.001 mm |
| Max. Single Pass Marking Depth | 0.1 mm |
| Estimated Laser Service Life | 100,000+ èdtan |
| Lojisyèl konpatib | EZCad2, LightBurn (Windows 7, 8, 10, 11, macOS) |
| Sipò pou Fòma Imaj | bmp, gif, jpg, jpeg, dxf, dst, ai |
| Dimansyon (L x W x H) | 15.8 x 13.4 x 21.3 pous |
| Pwa nèt | 40 liv. |
9. Garanti ak sipò
OMTech provides comprehensive customer support and warranty services for your product.
9.1 Garanti
Pwodwi sa a vini ak yon Sipò pou 2 zan period. Please retain your proof of purchase for warranty claims.
9.2 Sèvis Kliyan
OMTech offers a 24-hour service team located in the US, Philippines, and China to assist you with pre-sales, after-sales, and technical support. We also have over 50 Demo Room Hosts in the US for on-site experience by appointment.
Figure 9.1: OMTech's 24/7 after-sale support contact details.
Enfòmasyon pou kontakte:
- Telefòn: +1(949)438-4949
- Email (General Support): SUPPORT@OMTECHLASER.COM
- Email (Technical Support): TECHSUPPORT@OMTLASER.COM
Figure 9.2: Map illustrating the locations of OMTech Demo Room Hosts across the United States.