1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector IP65. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image 1: SEBSON Outdoor Motion Detector IP65 in anthracite.
2. Enstriksyon Sekirite
- Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre règleman lokal yo sou fil elektrik.
- Asire ke ekipman pou pouvwa a dekonekte anvan enstalasyon oswa antretyen.
- Do not exceed the maximum load capacity specified for the device.
- This product is designed for outdoor use with an IP65 rating, protecting against dust and low-pressure water jets.
- Avoid installing near heat sources, air conditioning units, or objects that may cause false triggers (e.g., swaying trees, reflective surfaces).
3. Pwodwi Features
- Integrated with 3 sensors for precise detection of people, large animals, and vehicles.
- Endis pwoteksyon IP65 pou itilizasyon deyò.
- Suitable for surface mounting on walls or ceilings.
- Maximum load capacity: 2,000W for incandescent lamps, 1,000W for LED or energy-saving lamps.
- Detection area: 20 meters at 360°.
- Vertical orientation adjustable by 180°.
- Adjustable activation duration: 10 seconds to 30 minutes, or permanent ON/OFF.
- Adjustable ambient brightness sensor: 3-2,000 LUX.
Imaj 2: Plis paseview of key product specifications and features.
4. Enstalasyon ak Enstalasyon
4.1 Kote montaj
Choose a stable surface for mounting, either a wall or a ceiling. Ensure the chosen location allows for the desired detection area and is free from obstructions. The detector can be vertically oriented by 180° after installation.
Image 3: Vertical adjustment range of the motion detector.
4.2 fil elektrik
Connect the motion detector to the AC power supply (230V) and the light fixture according to the wiring diagram provided by a qualified electrician. Ensure all connections are secure and insulated.
4.3 Adjusting Detection Area
The detection range is 20m at 360°. To reduce the detection range or exclude specific areas, use the provided modified cover. Cut the cover according to the desired pattern and place it over the sensor lens.
Image 4: Method for adjusting the detection area using a cover.
Image 5: Detection area diagrams for wall and ceiling mounting.
5. Operasyon Enstriksyon
5.1 Time Setting (TIME)
Use the 'TIME' knob to set the duration the light remains on after motion is detected. Settings range from 10 seconds to 30 minutes. You can also set it to permanent ON or OFF.
5.2 Light Sensitivity Setting (LUX)
Use the 'LUX' knob to adjust the ambient brightness threshold at which the motion detector activates the light. Settings range from 3 LUX (darkness) to 2,000 LUX (daylight). This allows the light to only turn on when it's dark enough.
Imaj 6: Detaye view of TIME and LUX adjustment controls.
6. Antretyen
- Regularly clean the sensor lens with a soft, dry cloth to ensure optimal detection performance.
- Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje aparèy la.
- Tcheke tout koneksyon elektrik yo detanzantan pou wè si yo sere epi si gen siy itilizasyon.
- No user-serviceable parts inside. For repairs, contact qualified personnel.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè a pa limen lè yo detekte mouvman. | 1. Incorrect LUX setting (too high). 2. Pa gen ekipman pou pouvwa. 3. Anpoul defo. | 1. Adjust LUX setting to a lower value. 2. Check power connections. 3. Ranplase anpoul la. |
| Limyè rete limen kontinyèlman. | 1. TIME setting too long or set to permanent ON. 2. Mouvman konstan nan zòn deteksyon an. 3. Sensor obstructed or dirty. | 1. Adjust TIME setting. 2. Reposition detector or adjust detection area with cover. 3. Clean sensor lens. |
| Limyè a limen san li pa wè okenn mouvman. | 1. Environmental factors (wind, heat, small animals). 2. Sensor too sensitive. | 1. Reposition detector or adjust detection area with cover. 2. Ensure no objects are causing false triggers. |
8. Espesifikasyon
- Mak: SEBSON
- Nimewo Modèl: IR_OUT_CA
- Koulè: Anthracite
- Sous pouvwa: AC (kouran altènatif)
- Pwa atik: 222 gram
- Max Deteksyon Range: 20 mèt
- Ang deteksyon: 360°
- Kalite montaj: Surface mount (wall and ceiling)
- Deskripsyon batri: Batri pa enkli
- Ranje Tanperati: 20 Degrees Celsius (Operating)
- Aparèy konpatib: Smart Home Hub, Light
- Itilizasyon Rekòmande: Residential security, commercial sector, automation, energy management
- Dimansyon: 85x55x170mm (approximate, refer to diagram for exact measurements)
Imaj 7: Dimansyon pwodwi a.
9. Garanti ak sipò
SEBSON products are designed for durability and performance. For warranty information or technical support, please refer to the official SEBSON websit la oubyen kontakte machann ou an. Kenbe resi acha ou kòm prèv acha.
Pou plis asistans, ou ka vizite SEBSON Brand Store.