ZIBOO 15B PRO True RMS Digital Multimeter User Manual

1. Enfòmasyon sou Sekirite

Before using the ZIBOO 15B PRO Digital Multimeter, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or personal injury.

1.1 Gid Sekirite Jeneral

• Always ensure the multimeter is in the correct function and range before making measurements.
• Pa sèvi ak miltimèt la si li sanble domaje oswa si fil tès yo ankonbran.
• Observe all safety precautions for working with electricity, including wearing appropriate personal protective equipment (PPE).
• Never exceed the maximum input values for any function.
• The device is rated CAT III 600V and CAT II 1000V. Adhere to these ratings for safe operation.
• The multimeter features double fuse protection to prevent damage from overload.

2. Pwodwi souview

The ZIBOO 15B PRO True RMS Digital Multimeter is a compact and reliable tool designed for a wide range of electrical testing applications. It offers accurate measurements for AC/DC voltage, AC/DC current, resistance, continuity, diode, capacitance, and duty cycle. Its True RMS capability ensures precise readings for non-sinusoidal waveforms.

Figi 1: Devan view of the ZIBOO 15B PRO Digital Multimeter, showing the display, rotary dial, and function buttons.

2.1 Karakteristik kle

• Vrè RMS: Provides accurate measurements for both sinusoidal and non-sinusoidal AC waveforms.
• Ekspozisyon 6000 konte: High-resolution display for precise readings.
• AC / DC Voltage: Measures up to 1000V.
• AC/DC Current: Measures up to 10A (optional current clamp for up to 600A).
• Resistance, Continuity, Diode, Capacitance, Duty Cycle: Essential functions for comprehensive electrical troubleshooting.
• VFD AC 600V: Variable Frequency Drive measurement capability.
• NCV/LIVE: Ki pa Peye-Kontakte Voltage and Live Wire Detection with Red LED Flash.
• Done kenbe: Freezes the displayed reading for easier recording.
• Ekleraj: Bright white backlight for clear visibility in various lighting conditions.
• Pwoteksyon Casing: C ekstèn dirabasing for enhanced protection.

Figure 2: Visual representation of the various measurement functions available on the multimeter.

2.2 Sa ki nan bwat la

• ZIBOO 15B PRO Digital Multimeter
• Multimeter Test Leads (Red and Black)
• Protective Caps for Test Leads
• Manyèl itilizatè

Note: AC pliers are an optional accessory and are not included with the standard package.

3. Enstalasyon

3.1 Enstalasyon batri

1. Asire w ke miltimèt la etenn.
2. Jwenn lòj batri a sou do aparèy la.
3. Unscrew the single Phillips #1 screw to open the compartment.
4. Insert three AA 1.5V batteries, observing correct polarity.
5. Ranplase kouvèti lòj batri a epi an sekirite li ak vis la.

3.2 Konekte fil tès yo

1. Mete fil tès nwa a nan priz 'COM' (Komen) an.
2. Pou pifò mezi (voltage, resistance, continuity, diode, capacitance, frequency, duty cycle), insert the red test lead into the 'VΩHz' jack.
3. For current measurements up to 10A, insert the red test lead into the '10A' jack.
4. Pou miliampere (mA) oubyen mikwoampere (µA) measurements, insert the red test lead into the 'µAmA' jack.

Figure 3: The ZIBOO 15B PRO Multimeter with its test leads, showing the connection points.

4. Operasyon Enstriksyon

4.1 Limen/Etenn epi Afiche

Turn the rotary dial from 'OFF' to any desired function to power on the multimeter. To power off, turn the dial back to 'OFF'. The device features an automatic power-off function to conserve battery life. Press the dirije button to activate or deactivate the display backlight for improved visibility.

4.2 Fonksyon Mezi

Rotate the dial to select the desired measurement function. Use the MÒD button to toggle between different sub-functions within a dial position (e.g., AC/DC voltage, NCV/LIVE).

1. VoltagMezi (AC/DC):
   Set the dial to 'V~' for AC voltage oubyen 'V=' pou vòl DCtage. Connect the test leads in parallel to the circuit or component being measured. The display will show the voltage lekti.
2. Mezi Kouran (AC/DC):
   Set the dial to 'A~' for AC current or 'A=' for DC current. Ensure the red test lead is in the appropriate current jack (10A or µAmA). Connect the multimeter in series with the circuit.
3. Mezi Rezistans (Ω):
   Set the dial to 'Ω'. Connect the test leads across the component. Ensure the circuit is de-energized before measuring resistance.
4. Tès kontinwite ():
   Set the dial to 'Ω' and press MÒD until the continuity icon appears. A buzzer will sound and a green LED will flash if continuity is detected (low resistance).
5. Tès dyod ():
   Set the dial to 'Ω' and press MÒD until the diode icon appears. Connect the test leads across the diode.
6. Capacitance Measurement (F):
   Set the dial to 'F'. Connect the test leads across the capacitor. Ensure the capacitor is discharged before measurement.
7. NCV (Vol ki pa gen kontaktage) / LIVE (Live Wire Detection):
   Set the dial to 'NCV LIVE'. The multimeter will detect AC voltage without direct contact. 'L' indicates a live wire with voltage, accompanied by a red LED flash and buzzer. 'EF' indicates non-contact detection.

Figure 4: The multimeter's NCV function detecting voltage near an electrical outlet, indicated by 'EF' on the display.

4.3 Fonksyon espesyal

• RETE: Peze a KENBE bouton an pou bloke lekti aktyèl la sou ekran an. Peze ankò pou lage.
• MIN / MAX: Peze a MIN / MAX button to record the minimum and maximum values during a measurement session. Press again to cycle through MIN, MAX, and current readings.
• RANGE: Peze a NIVO button to switch between auto-ranging and manual ranging.

5. Antretyen

5.1 Netwayaj

Siye miltimèt la casing ak piblisiteamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is completely dry before use.

5.2 Ranplasman batri

When the battery indicator appears on the display, replace the batteries as described in Section 3.1. Always use three new AA 1.5V batteries.

5.3 Ranplasman Fuse

The multimeter is equipped with internal fuses for protection. If a current measurement function stops working, the fuse may need replacement. To access the fuses, open the battery compartment (Section 3.1). The fuses are located inside. Replace with fuses of the correct type and rating (e.g., 10A/1000V and 500mA/1000V).

Figi 5: Entèn view highlighting the double fuse protection for safety and durability.

5.4 Swen Fil Tès

The test leads come with protective caps. Use these caps to protect the sharp tips when not in use or when measuring in situations where only a short tip is required. This helps prevent damage to the probes and ensures safety.

NAN. Depanaj

If you encounter issues with your ZIBOO 15B PRO Digital Multimeter, refer to the following common troubleshooting steps:

• Pa gen ekspozisyon/Ekspozisyon fèb: Check battery levels and replace if necessary. Ensure the multimeter is powered on.
• Lekti ki pa kòrèk: Verify the test leads are correctly inserted into the appropriate jacks for the selected function. Ensure the rotary dial is set to the correct measurement type and range. Check for damaged test leads.
• Current Function Not Working: The internal fuse for current measurement may have blown due to an overload. Replace the fuse as described in Section 5.3.
• Continuity Buzzer Not Sounding: Ensure the multimeter is in continuity mode. Check for open circuits or high resistance.

For persistent issues, consult the manufacturer's support resources.

7. Espesifikasyon

Note: Accuracy specifications are typical values and may vary slightly.

Figure 6: A detailed table outlining the technical specifications for the ZIBOO 15B PRO multimeter.

8. Garanti ak sipò

For warranty information and customer support, please refer to the official ZIBOO website or contact the seller directly through the platform where the product was purchased. Standard return policies typically apply (e.g., 30-day return window).