Entwodiksyon
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Enfòmasyon sou Sekirite
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Kontni pake
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Gaz Lift Silenn
- Syèj Asanble
- Asanble dosye
- Tèt
- Akoudwa (Agòch ak Dwat)
- Footrest (if applicable to your model)
- Materyèl pou asanblaj (vis, rondelles, kle Allen)
- Manyèl Enstriksyon
Enstriksyon Asanble
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Rasanble baz chèz la: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Atache akoudwar yo: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Atache Dossier la: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Mete chèz la ak dosye a ki reyini avèk anpil atansyon sou silenn asansè gaz la, epi asire li santre epi li stab.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Enstriksyon Operasyon ak Ajisteman
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Ajisteman Wotè Syèj
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Ajisteman vètikal: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D Adjustable Armrests
The armrests provide versatile support and can be adjusted in three dimensions:
- Ajisteman wotè: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Wotasyon: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Ajisteman Tèt: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Fonksyon Reclining: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Imaj: Yon gwo plan view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Antretyen
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Cleaning Mesh Fabric: The breathable mesh fabric can be cleaned with a damp twal ak savon modere. Evite pwodwi chimik piman bouk yo.
- Netwayaj ankadreman: Wipe the alloy steel frame and plastic components with a soft, damp twal.
- Antretyen wou: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- Sere boulon Fastener: Chak kèk mwa, tcheke tout vis ak boulon yo pou asire yo byen sere. Sere boulon yo ankò si sa nesesè pou kenbe estabilite.
Imaj: Yon imaj agrandi view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chèz la pa ajiste wotè a | Silenn asansè gaz la pa fonksyone byen oubyen levye a pa angaje. | Asire w levye ajisteman wotè a byen angaje. Si pwoblèm nan pèsiste, silenn asansè gaz la ka bezwen ranplase. Kontakte sèvis kliyan. |
| Chèz tranble oswa santi l enstab | Vis ki lach oswa planche inegal. | Tcheke epi sere tout vis asanblaj yo. Asire w ke chèz la sou yon sifas plat e inifòm. |
| Armrests are loose | Vis aliye yo ki lach. | Sere vis ki tache akoudwar yo ak chèz la. |
| Dokiman an pa ka panche oswa bloke | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Espesifikasyon
- Mak: Hbada
- Modèl: E2
- Koulè: Nwa
- Dimansyon pwodwi: 30.51"D x 22.24"W x 18.11"H
- Style tounen: May
- Ranje laj (Deskripsyon): Granmoun
- Style bra: Padded, 3D Adjustable
- Ranpli materyèl: May
- Materyèl: Alloy Steel (Frame), Mesh (Seat/Back)
- Konte Pozisyon Reclining: 3 (jiska 135 degre)
- Panche: Wi
- Faktè fòm: Prezidan biwo
Garanti ak sipò
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Ranplasman Pyès: Parts are replaced, not repaired, for covered issues.
- Règleman pou retounen 30 jou: Enjoy a 30-day return period without specific reasons required.
- Damaged Upon Arrival: Repair and replacement are guaranteed for items damaged during shipping.
- Sèvis Kliyan: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Pou plis enfòmasyon, vizite a Hbada Store on Amazon.