Sharkoon MK6 RGB Micro ATX PC Case User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Sharkoon MK6 RGB Micro ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

The Sharkoon MK6 RGB is a compact Micro ATX PC case designed with a modern glass aesthetic, featuring tempered glass panels on the front and side. It includes three pre-installed addressable RGB PWM fans for efficient cooling and customizable lighting. The case supports BTF motherboards and offers ample space for various components, including large graphics cards and extensive cooling solutions.

2. Enstalasyon ak Konpozan

Before starting, ensure you have all necessary tools, including a screwdriver set and anti-static wrist strap.

2.1 Louvri ka a

Carefully remove the tempered glass side panel by unscrewing the retaining thumbscrews, typically located at the rear of the case. Gently slide the panel off and set it aside on a soft, flat surface to prevent scratches.

2.2 Enstalasyon mèr

1. Install the I/O shield into the designated opening at the rear of the case.
2. Align your Micro ATX or BTF motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Sere kat manman an byen sere avèk vis yo bay yo. Pa sere l twòp.

2.3 Enstalasyon Power Supply Unit (PSU).

The MK6 RGB supports bottom-mount power supplies up to 23.5 cm in length.

1. Glise PSU a nan konpatiman ki fèt pou li a, anba dèyè bwat la.
2. Secure the PSU to the case using screws from the rear panel.

2.4 Enstalasyon Disk Depo

The case accommodates up to two 3.5" HDDs or three 2.5" SSDs.

• Disk Difisil 3.5 pous: Locate the drive cage, typically near the PSU shroud. Mount the HDDs using the provided trays or screws.
• SSD 2.5 pous: SSDs can be mounted on dedicated brackets behind the motherboard tray or within the drive cage.

2.5 Enstalasyon Kat Grafik (GPU)

The MK6 RGB supports graphics cards up to 41 cm in length and includes a rubberized graphics card holder for support.

1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
2. Mete kat grafik ou a nan plas PCIe ki apwopriye a sou kat manman an.
3. Secure the graphics card with screws. Adjust the graphics card holder to provide additional support if needed.

2.6 Enstalasyon Sistèm Refwadisman

The case comes with three pre-installed 120mm addressable RGB PWM fans. Two fans are inverted on the side for intake, and one is at the rear for exhaust. The case supports up to eight fans in total.

• Fanatik adisyonèl: Install additional 120mm or 140mm fans in available mounting positions (top, bottom, side) as required for optimal airflow.
• Liquid Cooling Radiators: The case supports a 360mm radiator and an additional 240mm radiator. Mount radiators to the designated areas (e.g., top, side) using appropriate screws.

2.7 Jesyon kab

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics.

Figi 1: Entèn view of the Sharkoon MK6 RGB PC case, highlighting the pre-installed fans and drive bay locations.

Figi 2: Entèn view showing the motherboard tray and various cutouts for efficient cable management.

Figi 3: Entèn view illustrating the available mounting points for liquid cooling radiators.

Figi 4: Entèn view displaying the adjustable graphics card holder for enhanced GPU support.

3. Operasyon Enstriksyon

3.1 Limen

After all components are installed and cables are connected, close the side panel. Connect your monitor, keyboard, mouse, and power cable to the PC. Press the power button on the front panel to start your system.

3.2 Kontwòl ekleraj RGB

The MK6 RGB includes an RGB controller that provides connections for up to four LED elements and up to four PWM fans. The pre-installed fans are connected to this controller.

• Default Modes: The RGB lighting will typically cycle through default patterns upon startup.
• Kontwòl lojisyèl: If connected to a compatible motherboard, RGB lighting can be controlled via the motherboard's RGB synchronization software. Refer to your motherboard manual for specific instructions.
• Manyèl kontwòl: Some cases may feature a dedicated button on the front panel to cycle through RGB modes. Consult the case's quick start guide for this feature.

3.3 Front Panel Connectivity

The front panel features modern TRRS and USB-C ports for broad compatibility with various devices. Connect your peripherals and storage devices as needed.

Figi 5: Devan view of the Sharkoon MK6 RGB PC case, showcasing the tempered glass panel and visible RGB fans.

4. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan PC ou yo.

4.1 Netwayaj Filtè Pousyè

The case features dust filters to prevent dust accumulation. Regularly clean these filters to maintain good airflow.

1. Locate and remove the dust filters (e.g., top, bottom, front).
2. Clean the filters using compressed air or by rinsing them with water. Ensure they are completely dry before reinstallation.

4.2 Netwayaj Vit Apeze

Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the tempered glass panels. Avoid harsh chemicals that could damage the glass or coatings.

4.3 Netwayaj Vantilatè

Over time, dust can accumulate on fan blades, reducing cooling efficiency. Use compressed air to gently clean the fan blades. Ensure the system is powered off before cleaning.

Figi 6: Top view of the Sharkoon MK6 RGB PC case, illustrating the removable magnetic dust filter for easy cleaning.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

5.1 Sistèm nan pa limen

• Koneksyon pouvwa: Verifye ke PSU a byen konekte nan priz miray la epi ke switch pouvwa ki sou PSU a nan pozisyon 'ON'.
• Konektè panèl devan: Asire w ke kab bouton pouvwa ki soti nan panèl devan an byen konekte ak konektè panèl devan kat manman an.
• Eleman Entèn: Check that all major components (motherboard, CPU, GPU, RAM) are securely seated and connected to the PSU.

5.2 Fans Not Spinning or RGB Not Lighting Up

• Koneksyon Vantilatè: Confirm that all fan power cables are securely connected to the motherboard or the RGB controller.
• RGB Controller Power: Ensure the RGB controller itself is receiving power, typically via a SATA power connector from the PSU.
• Software/Button: If using software control, check the software settings. If there's a physical RGB button, try cycling through modes.

5.3 Poor Airflow or Overheating

• Filtè Pousyè: Clean any clogged dust filters.
• Oryantasyon vantilatè: Ensure fans are oriented correctly for optimal airflow (intake at front/side, exhaust at rear/top).
• Jesyon kab: Improve cable management to reduce obstructions to airflow.

6. Espesifikasyon

7. Enfòmasyon sou Garanti

For detailed warranty information regarding your Sharkoon MK6 RGB PC Case, please refer to the official Sharkoon website or contact your local retailer. Warranty terms and conditions may vary by region and purchase location.

8. Sipò teknik

If you encounter any issues or require technical assistance beyond the scope of this manual, please visit the official Sharkoon support website for FAQs, driver downloads, and contact information. You may also reach out to your point of purchase for support.