Manyèl Itilizatè Mikwofòn Lavalier San Fil BOYA V35

1. Entwodiksyon

The BOYA V35 is a compact and easy-to-use 2.4GHz wireless microphone system designed for capturing clear, high-quality audio. It is ideal for content creators, journalists, and anyone needing a reliable wireless audio solution for cameras and camcorders with a 3.5mm input. This manual provides detailed instructions for setting up, operating, and maintaining your BOYA V35 system.

2. Ki sa ki nan bwat la

Tanpri verifye sa ki nan pake a pou asire w tout atik yo la:

• BY-V35 Transmitter (TX) x 2
• BY-V35 RX Receiver x 1
• BY-V35 Foam Windscreen x 2
• USB-C to USB-A Charging Cable x 1
• 1 kab odyo TRS 3.5 mm pou TRS
• Ka chaje x 1

Figi 2.1: Diagram showing all components included in the BOYA V35 package, including two transmitters, one receiver, a charging case, foam windscreens, and cables.

3. Pwodwi souview

3.1. Transmetè (TX)

Figi 3.1: Devan view of the BY-V35 Transmitter with the foam windscreen attached, showing the BOYA logo and indicator light.

Figi 3.2: Side view of the BY-V35 Transmitter, illustrating the integrated clip for attachment to clothing and the foam windscreen.

The transmitter is a compact unit with an integrated microphone and clip. It features a power button, a status indicator light, and a USB-C charging port. The omnidirectional microphone is designed to capture sound from all directions.

3.2. Reseptè (RX)

Figi 3.3: Side view of the BY-V35 Receiver, showing the USB-C port, power button, and 3.5mm output jack.

The receiver connects to your recording device (camera, camcorder). It includes a 3.5mm TRS output jack, a power button, a status indicator light, and a USB-C charging port. The receiver is designed for easy connection and stable signal reception.

3.3. Chaje Ka

Figi 3.4: The complete BOYA V35 system, including the charging case, two transmitters, and one receiver, ready for storage or charging.

The charging case provides convenient storage and charging for both transmitters and the receiver. It has its own USB-C charging port and LED indicators to show the charging status of the case and the devices inside.

4. Gid Enstalasyon

4.1. Chaje Aparèy yo

1. Mete transmetè a ak reseptè a nan bwat chaje a.
2. Connect the USB-C to USB-A charging cable to the charging case and a USB power adapter (not included).
3. The LED indicators on the charging case will show the charging status. The device indicators will also light up during charging.
4. Ensure all devices are fully charged before first use for optimal battery life.

4.2. alimante sou ak appariement

1. Press and hold the power button on both the transmitter(s) and the receiver for a few seconds until the indicator lights turn on.
2. The devices will automatically attempt to pair. A solid blue light on both the transmitter and receiver indicates a successful connection. A blinking light indicates searching for a connection.

4.3. Konekte ak yon aparèy anrejistreman

1. Connect one end of the 3.5mm TRS to TRS audio cable to the 3.5mm output jack on the BY-V35 receiver.
2. Connect the other end of the 3.5mm TRS to TRS audio cable to the microphone input jack on your camera or camcorder.
3. Ensure your recording device's audio input is set to external microphone if applicable.

4.4. Attaching the Transmitter

1. Attach the foam windscreen to the transmitter's microphone to reduce wind noise and plosives.
2. Use the integrated clip on the back of the transmitter to securely attach it to the speaker's clothing, ideally about 6-8 inches (15-20 cm) from the mouth.

5. Operasyon Enstriksyon

5.1. Power On/Off

To power on or off the transmitter or receiver, press and hold the power button for approximately 3 seconds. The indicator light will illuminate or turn off accordingly.

5.2. Anrejistreman Audio

1. Ensure the transmitter(s) and receiver are powered on and successfully paired (solid blue indicator light).
2. Start recording on your connected camera or camcorder.
3. Monitor the audio levels on your recording device to ensure proper sound capture.

5.3. Status Indicator Lights

• Solid Blue: Device is powered on and successfully paired.
• Klè ble: Device is powered on and searching for a connection.
• Solid Wouj: Batri ki ba.
• Blinking Red (while charging): Chaje an pwogrè.
• Solid Green (while charging): Konplètman chaje.

6. Antretyen

6.1. Netwayaj

• Siye aparèy yo ak yon twal mou epi sèk.
• Pa sèvi ak pwodwi chimik piman bouk oswa pwodui netwayaj abrazif.
• Ensure the foam windscreens are clean and free of debris. Replace if damaged.

6.2. Depo

• Store the BOYA V35 system in its charging case when not in use to protect it from dust and damage.
• Sere nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.

6.3. Swen batri

• Charge the devices regularly, even if not used frequently, to maintain battery health.
• Evite dechaje pil yo nèt pandan yon bon bout tan.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

Pou enfòmasyon sou garanti ak sipò teknik, tanpri al gade sit ofisyèl BOYA a. websit la oubyen kontakte distribitè lokal ou a. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.