BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. Enfòmasyon sou Sekirite

Tanpri li tout avètisman ak enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv avètisman ak enstriksyon yo, sa ka lakòz chòk elektrik, dife ak/oswa blesi grav.

• pa fè sa jump start a frozen battery.
• pa fè sa use the jump starter if the cables or clamps yo domaje.
• Ensure proper polarity: Konekte cl wouj laamp nan tèminal pozitif (+) la ak nwa clamp to the negative (-) terminal. Reverse polarity can cause damage.
• Retire clamps promptly: Dekonekte clamps from the vehicle battery immediately after the engine starts.
• Kenbe lwen timoun yo: Aparèy sa a se pa yon jwèt.
• Tanperati opere: Use the device within the specified temperature range (-4°F to 140°F).
• Vantilasyon: Ensure adequate ventilation when operating the air compressor.
• Karakteristik pwoteksyon: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Pwodwi souview & Eleman

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Sa ki nan bwat la

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• Smart Jumper Clamps (Wouj pou Pozitif, Nwa pou Negatif)
• Air Hose with Quick Connector
• Various Air Nozzles (for different inflatables)
• USB-C Chaje Kab
• Manyèl itilizatè
• Ka Depo

2.2 Karakteristik pwodwi

• Kouran Pik 7000A: Capable of starting all gas engines and up to 10.0L diesel engines.
• Konpresè lè 150 PSI: Cordless inflator with tire pressure detection for various inflatables.
• Bank pouvwa 26800mAh: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• Ekran LCD 3.4 pous: Clear display for battery status, pressure readings, and operational modes.
• Doub limyè ki ap dirije: Features Normal, SOS, and Strobe modes for emergency illumination.
• Pwoteksyon Sekirite Avanse: 10 types of protection for safe operation.
• Operasyon tout tan: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Panèl kontwòl ak pò yo

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• Ekspozisyon LCD: Shows battery level, pressure, and mode.
• "M" Button: Mode/Unit Switching (e.g., PSI, BAR, KPA).
• "OK" Button: Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• Bouton "+": Preset Air Pressure Increase.
• Bouton "-": Preset Air Pressure Decrease.
• Pò Demaraj Rapid: For connecting smart jumper clamps.
• Pò tiyo lè a: Pou konekte tiyo lè a.
• Pò Sòti USB-A (x2): Pou chaje aparèy ekstèn yo.
• Pò Antre/Sòti USB-C (x1): For charging the jump starter or external devices.

3. Enstalasyon

3.1 Chaje demaraj la

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. Charging is complete when the battery indicator shows full.

4. Operasyon Enstriksyon

4.1 Demare yon Veyikil

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

1. Etap 1: Insert the blue plug of the smart jumper clamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. Etap 2: Konekte wouj (+) clamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp nan tèminal negatif batri machin nan.
3. Etap 3: Yon fwa konekte, klozèt entelijan anamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. Etap 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, apre sa wouj la (+) clampDekonekte klou entelijan an.amps from the jump starter unit.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clamps immediately after starting.

4.2 Using the Air Compressor

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Use the "+" and "-" buttons to set the desired target pressure.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Disconnect the nozzle and air hose.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Itilizasyon kòm yon Bank Pouvwa

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. Demarè a ap kòmanse chaje aparèy ou an otomatikman.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 Sèvi ak flach ki ap dirije a

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Antretyen

• Chaje: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
• Netwayaj: Siye aparèy la avèk yon twal sèk epi mou. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Depo: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Swen kab: Inspect jumper cables and air hose for any damage before each use.

NAN. Depanaj

7. Espesifikasyon

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Garanti & Sipò

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
• Sipò Kliyan 24/7: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM websit.