1. Entwodiksyon
Thank you for choosing the TOTAL 20V Cordless Brushless Impact Wrench, Model TIWLI2085. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your tool. Please read it thoroughly before use and keep it for future reference.
Figure 1: The TOTAL TIWLI2085 impact wrench with its 20V battery installed, showcasing its compact design and readiness for operation.
2. Jeneral Sekirite Enstriksyon
Toujou swiv prekosyon sekirite debaz yo pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl lè w ap itilize zouti elektrik.
- Sekirite Zòn Travay: Kenbe zòn travay ou pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
- Sekirite elektrik: Evite kontak kò ak sifas ki konekte ak tè. Pa ekspoze zouti elektrik yo anba lapli oswa nan kondisyon mouye.
- Sekirite Pèsonèl: Toujou mete pwoteksyon pou je yo. Sèvi ak pwoteksyon pou zòrèy lè w ap opere pou yon bon bout tan. Abiye byen; evite rad ki lach oswa bijou. Mare cheve w long.
- Itilizasyon zouti ak swen: Pa fòse zouti elektrik la. Sèvi ak zouti ki kòrèk la pou aplikasyon w lan. Dekonekte pake batri a nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
- Itilizasyon ak antretyen pil: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. Do not open, crush, or expose battery packs to fire or high temperatures.
3. Pwodwi souview
The TOTAL TIWLI2085 is a powerful 20V cordless brushless impact wrench designed for heavy-duty fastening and loosening applications. It features a robust brushless motor for extended tool life and efficiency, an integrated LED work light for improved visibility, and multiple speed/impact settings for versatile use.
Eleman ki enkli:
- 1 x TOTAL 20V Cordless Brushless Impact Wrench (TIWLI2085)
- 2 x 4.0Ah Lithium-Ion Batteries (TFBLI2002)
- 1 x Charger (TFCLI2001E, 220-240V~50/60Hz)
- 3 x Deep Impact Sockets (22mm, 24mm, 27mm)
- 1 x pote sak
Figure 2: The TOTAL TIWLI2085 impact wrench displayed alongside the three included deep impact sockets (22mm, 24mm, 27mm), illustrating the complete kit.
4. Enstalasyon
4.1 Chaje batri a
- Connect the charger (TFCLI2001E) to a standard 220-240V~50/60Hz power outlet.
- Slide the battery pack (TFBLI2002) onto the charger until it clicks into place.
- Limyè endikatè chaje a sou plato a ap limen, anjeneral li wouj pou chaje epi vèt pou chaje nèt.
- Yon fwa li chaje nèt, dekonekte chajè a nan priz kouran an epi retire pake batri a.
Nòt: For optimal battery life, allow the battery to cool down before charging if it has been heavily used. Do not store batteries in a discharged state.
4.2 Attaching/Removing Sockets
- Ensure the impact wrench is turned off and the battery is removed for safety.
- Align the square drive of the desired impact socket (e.g., 22mm, 24mm, or 27mm) with the 1/2 inch square drive anvil on the tool.
- Push the socket firmly onto the anvil until it locks into place. Some sockets may require pulling back a retaining ring or pin.
- To remove, reverse the process, pulling back the retaining mechanism if present, and pull the socket off.
5. Operasyon Enstriksyon
5.1 Enstale batri a
Slide a charged battery pack into the base of the impact wrench handle until it clicks securely into place.
5.2 Limen/Etenn ak Kontwòl Direksyon
- On/Off: Squeeze the trigger switch to turn the tool on. Release the trigger to turn it off. The integrated LED work light will activate when the trigger is pressed.
- Kontwòl direksyon: Use the forward/reverse selector switch, typically located above the trigger, to choose the rotation direction (clockwise for fastening, counter-clockwise for loosening). Ensure the switch is fully engaged in the desired position before operating.
5.3 Speed and Impact Rate Adjustment
The TIWLI2085 features multiple speed and impact rate settings, allowing you to match the tool's performance to the task. Refer to the tool's controls for specific adjustment methods, which typically involve a button or switch to cycle through settings:
- Vitès san chaj: 0-1600 / 0-2100 / 0-2400 RPM
- Pousantaj enpak: 0-1500 / 0-1800 / 0-2200 BPM
Start with a lower setting for delicate tasks or when first engaging a fastener, and increase as needed.
5.4 Fikse ak Dekole
- Chwazi priz ki apwopriye a pou eleman fiksasyon an.
- Set the direction switch to the desired mode (forward for fastening, reverse for loosening).
- Mete priz la sou eleman fiksè a.
- Squeeze the trigger to begin operation. Apply steady pressure to keep the socket engaged.
- For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener breaks free.
Figure 3: The TOTAL TIWLI2085 impact wrench being used to fasten a lug nut on a car wheel, demonstrating its application for automotive tasks.
Figure 4: The TOTAL TIWLI2085 impact wrench in action, fastening a bolt on a metal workpiece, highlighting its versatility for various heavy-duty applications.
6. Antretyen
Antretyen regilye asire pèfòmans optimal epi pwolonje lavi kle enpak ou a.
- Netwayaj: Kenbe ouvèti vantilasyon zouti a pwòp epi san debri. Sèvi ak yon twal mou, damp twal pou siye lojman an. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Swen batri: Sere pil yo nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm. Pa sere pil ki fin dechaje nèt pou yon bon bout tan.
- Enspeksyon: Periodically inspect the square drive anvil for wear or damage. Check the power cord of the charger for any cuts or fraying.
- Lubrifikasyon: Zouti sa a gen yon motè san bwòs ak konpozan sele, ki pa bezwen lubrifikasyon pa itilizatè a.
For any repairs or internal maintenance, contact qualified service personnel.
NAN. Depanaj
Seksyon sa a adrese pwoblèm komen ou ka rankontre ak kle enpak ou a.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Zouti pa kòmanse | Batri a pa chaje oswa li pa byen enstale. | Asire w ke batri a byen chaje epi li byen mete l jiskaske li fè yon klik. |
| Reduced power or torque | Low battery charge. Incorrect speed/impact setting. | Recharge battery. Select a higher speed/impact setting. |
| Socket does not attach securely | Socket not fully engaged. Anvil or socket worn. | Push socket firmly until it locks. Inspect anvil and socket for damage; replace if necessary. |
| Zouti chofe | Itilizasyon pwolonje ak entansif. Vantilasyon bloke. | Kite zouti a refwadi. Retire tout obstak ki bloke fant vantilasyon yo. |
8. Espesifikasyon
Technical specifications for the TOTAL 20V Cordless Brushless Impact Wrench TIWLI2085:
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | TIWLI2085 |
| Kalite motè | Brushless |
| Opere Voltage | 20V |
| Kondwi kare | 1.27 cm (1/2 pous) |
| Vitès san chaj | 0-1600 / 0-2100 / 0-2400 RPM |
| To enpak | 0-1500 / 0-1800 / 0-2200 BPM |
| Fixe koupl | 850 Nm |
| Nut-busting Torque | 1000 Nm |
| Karakteristik entegre | Ki ap dirije limyè travay |
| Kapasite batri | 2 x 4.0Ah (TFBLI2002) |
| Charger Voltage | 220-240V~50/60Hz (TFCLI2001E) |
| Dimansyon pwodwi | 10 x 20 x 37 cm |
| Pwa atik | 209 g (Note: This weight may refer to a specific component or be a data entry error, as typical impact wrenches of this power are heavier.) |
| Materyèl | Plastik |
| Koulè | Gray and Teal |
| Dat Premye Disponib | 23 septanm 2024 |
9. Garanti ak sipò
TOTAL products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your local TOTAL dealer or customer service center. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official TOTAL tools websit oswa kontakte sipò kliyan yo.