1. Entwodiksyon
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your POOLEX Mag Full Inverter 5 KW Pool Heat Pump. Please read this manual thoroughly before installation and use, and keep it for future reference. This heat pump is designed to heat swimming pools up to 35 m³.
2. Enstriksyon Sekirite
Always observe the following safety precautions to reduce the risk of injury, electric shock, fire, or damage to the product.
- Ensure the heat pump is installed by a qualified professional in accordance with local electrical and plumbing codes.
- Pa opere inite a si kòd elektrik la oswa ploge domaje.
- Kenbe timoun ak bèt kay lwen aparèy la pandan l ap fonksyone.
- Do not insert objects into the fan grille.
- Asire w ke gen bon vantilasyon toutotou aparèy la. Pa bloke antre oswa sòti lè yo.
- Dekonekte kouran anvan ou fè nenpòt antretyen oswa reparasyon.
- Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te bay sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo. .
3. Pake kontni
Verifye ke tout konpozan yo prezan nan pake a:
- POOLEX Mag Full Inverter 5 KW Pool Heat Pump unit
- Manyèl Itilizatè (dokiman sa a)
- Connection fittings (quantity may vary)
- Kousinen anti-Vibration
4. Enstalasyon ak Enstalasyon
4.1. Konsiderasyon sou plasman
Proper placement is crucial for the heat pump's efficiency and longevity.
- Kote: Install the heat pump outdoors, in a well-ventilated area, away from direct sunlight and corrosive environments.
- Clearance: Ensure adequate clearance around the unit for proper airflow. Maintain at least 50 cm (20 inches) from walls or other obstructions on the air intake side and 100 cm (40 inches) on the air discharge side.
- Drenaj: Position the unit on a stable, level surface that allows for proper condensation drainage.
Figi 1: Devan view of the POOLEX Mag Full Inverter 5 KW Pool Heat Pump. This image shows the main body, the circular fan grille on the front, and the side panel with water connections.
4.2. Koneksyon dlo
Connect the heat pump to your pool's filtration system. The heat pump should be installed after the filter and before any chemical injection points.
- Turn off the pool pump and close all necessary valves.
- Connect the pool water outlet to the heat pump's "IN" port.
- Connect the heat pump's "OUT" port to the pool water return line.
- Asire w ke tout koneksyon yo sere epi yo pa koule.
Figi 2: Devan view of the POOLEX Mag Full Inverter 5 KW Pool Heat Pump, highlighting the fan grille and the overall compact design.
4.3. Koneksyon elektrik
Enstalasyon elektrik dwe fèt pa yon elektrisyen kalifye.
- Ensure the power supply matches the specifications of the heat pump (refer to Section 7: Specifications).
- Install a dedicated circuit breaker and residual current device (RCD) for the heat pump.
- Connect the power cable to the designated terminal block inside the unit, ensuring proper grounding.
4.4. Inisyal demaraj
After completing all connections:
- Open all pool valves to allow water to flow through the heat pump.
- Turn on the pool pump to ensure water circulation. Check for leaks.
- Turn on the dedicated circuit breaker for the heat pump.
- The unit will perform a self-check. Follow the instructions on the control panel to set your desired pool temperature.
5. Operasyon Enstriksyon
5.1. Kontwòl Panel Overview
The heat pump features an intuitive digital control panel. Refer to the specific diagrams in your physical manual for exact button layouts.
- Bouton pouvwa: Li vire inite a ON/OFF.
- bouton mòd: Cycles through operating modes (e.g., Heating, Cooling, Auto).
- Flèch anwo/desann: Adjust desired temperature settings.
- Ekspozisyon ekran: Shows current temperature, set temperature, and operating status.
5.2. Mete Tanperati Dezire
- Ensure the heat pump is powered on and the pool pump is running.
- Press the "Mode" button to select the desired operating mode (typically "Heating").
- Use the "Up" or "Down" arrow buttons to adjust the target water temperature. The display will show the set temperature.
- The heat pump will automatically start heating the water until the set temperature is reached.
6. Antretyen
Regular maintenance ensures optimal performance and extends the lifespan of your heat pump.
6.1. Netwayaj regilye
- Eksteryè: Netwaye deyò a casing ak yon mou, damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
- Inlet/Sòti lè: Periodically check and clear any debris (leaves, dirt, etc.) from the air inlet and outlet grilles to ensure unrestricted airflow.
- Bobin evaporatè: Gently clean the evaporator coils (located at the back/sides) with a soft brush or low-pressure water spray if they become dirty. Avoid bending the fins.
Figi 3: Dèyè view of the POOLEX Mag Full Inverter 5 KW Pool Heat Pump, showing the evaporator coils which require periodic cleaning for optimal performance.
6.2. Preparasyon pou ivè
If you live in an area where temperatures drop below freezing, proper winterization is essential to prevent damage.
- Turn off the heat pump and disconnect its power supply.
- Drain all water from the heat pump's plumbing by disconnecting the water lines and allowing gravity to empty the unit.
- Store the unit under a protective cover in a dry, sheltered location if possible, or use a dedicated winter cover if it remains outdoors.
NAN. Depanaj
Seksyon sa a adrese pwoblèm komen ou ka rankontre. Pou pwoblèm ki pi konplèks, kontakte pèsonèl sèvis kalifye.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ponp chalè pa kòmanse. | No power; circuit breaker tripped; low water flow. | Check power supply and circuit breaker. Ensure pool pump is running and water valves are open. |
| Unit runs but no heat. | Incorrect mode selected; ambient temperature too low; refrigerant issue. | Verify operating mode is "Heating". Check ambient temperature against operating limits. If problem persists, contact service. |
| Low heating capacity. | Dirty evaporator coils; insufficient airflow; pool size exceeds capacity. | Clean evaporator coils and ensure proper clearance around the unit. Verify pool volume is within specified limits. |
| Kòd erè a parèt. | Defo sistèm espesifik. | Refer to the detailed error code list in your physical manual or contact technical support with the specific code. |
8. Espesifikasyon
Technical specifications for the POOLEX Mag Full Inverter 5 KW Pool Heat Pump (Model PC-MAG050FI).
| Karakteristik | Detay |
|---|---|
| Mak | POOLEX |
| Nimewo Modèl | PC-MAG050FI |
| Kalite | Ponp Chalè Pisin Inverter konplè |
| Kapasite chofaj | 5 KW |
| Volim Pisin Rekòmande | Jiska 35 m³ |
| ASIN | B0DHHLMH2V |
| Manifakti | Poolex |
9. Garanti ak sipò
POOLEX products are manufactured to high-quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official POOLEX websit.
For technical support, spare parts, or service inquiries, please contact your authorized POOLEX dealer or the POOLEX customer service department. Have your model number (PC-MAG050FI) and purchase date ready when contacting support.