VECYS Bottom Loading Water Dispenser User Manual

1. Entwodiksyon

Thank you for choosing the VECYS Bottom Loading Water Dispenser. This manual provides important information regarding the installation, operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.

This water dispenser is designed to provide hot, cold, and room temperature water from 3 or 5-gallon water bottles, featuring a convenient bottom-loading design, child safety lock, and a self-cleaning function.

2. Enfòmasyon sou Sekirite

WARNING: To reduce the risk of injury and property damage, you must read this entire guide before assembling, installing, and operating the dispenser.

• Always place the dispenser on a level surface.
• Pa sèvi ak dispansè a si kòd kouran an oswa ploge a domaje.
• Asire w ke dispansè a byen konekte ak tè a.
• Kenbe dispansè a lwen limyè solèy dirèk ak sous chalè.
• Pa plonje dispansè a, kòd la, oswa ploge a nan dlo oswa lòt likid.
• Debranche dispansè a anvan ou netwaye li oswa fè nenpòt antretyen.
• The hot water faucet is equipped with a child safety lock. Always engage the lock when not in use to prevent accidental hot water dispensing.
• Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te bay sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo. .

3. Pwodwi souview

Figi 3.1: Devan view of the VECYS Bottom Loading Water Dispenser.

Figi 3.2: Side view of the VECYS Water Dispenser showing key features and dimensions (40.8in H x 14.2in W x 12.2in D).

Konpozan kle:

• Kontwòl Panel: Features LED indicators for power, heating, and cooling status.
• Dispensing Faucets: Separate faucets for hot, room temperature, and cold water.
• Fèmen Sekirite Timoun: Located on the hot water faucet.
• Degoute Plato: Detachable pou netwaye fasil.
• Konpatiman Chaje Anba: Li gen yon boutèy dlo 3 oswa 5 galon.
• Kòd pouvwa: Pou koneksyon elektrik.

4. Enstalasyon

4.1 Debake

• Retire dispansè a nan anbalaj li avèk prekosyon.
• Enspekte aparèy la pou wè si li gen nenpòt domaj pandan transpò a. Si li domaje, pa itilize li epi kontakte sèvis kliyan.
• Remove all packaging materials, including any protective films or tapes.

4.2 Plasman

Figure 4.1: The water dispenser can be placed in various indoor environments such as offices or homes.

• Place the dispenser on a hard, level surface that can support its weight when full.
• Ensure there is at least 4 inches of clearance from the back and sides of the dispenser to a wall to allow for proper ventilation.
• Avoid placing the dispenser in direct sunlight or near heat-generating appliances.
• Do not place the dispenser in an enclosed area or cabinet.

4.3 Water Bottle Installation (Bottom Loading)

1. Louvri pòt kabinè ki anba nan dispansè a.
2. Retire bouchon an nan yon nouvo boutèy dlo 3 oswa 5 galon.
3. Insert the water intake tube (probe) into the opening of the water bottle. Ensure the tube reaches the bottom of the bottle.
4. Slide the water bottle into the lower cabinet.
5. Fèmen pòt kabinè a byen.

4.4 Initial Priming and First Use

1. After installing the water bottle, plug the dispenser into a grounded electrical outlet.
2. Allow the dispenser to sit for at least 5 minutes before turning on the heating or cooling functions. This allows water to fill the internal reservoirs.
3. Dispense water from all three faucets (hot, room temperature, cold) until water flows steadily. This purges any air from the lines.
4. Turn on the hot and cold water switches located on the back of the unit (if applicable). The corresponding LED indicators on the front panel will illuminate.
5. Allow approximately 15-20 minutes for the water to reach optimal hot and cold temperatures before first use.

5. Operasyon Enstriksyon

5.1 Distribye Dlo

Figure 5.1: The dispenser offers hot, normal (room temperature), and cold water options.

Figure 5.2: Visual representation of hot water for beverages, fresh (room temperature) water, and cold water for refreshment.

• Dlo cho: Push the child safety lock button inward, then press the hot water lever. Release the lever to stop dispensing.
• Tanperati chanm dlo: Press the room temperature water lever. Release the lever to stop dispensing.
• Dlo frèt: Press the cold water lever. Release the lever to stop dispensing.

5.2 Sekirite timoun

Figure 5.3: The child safety lock (red button) and LED indicators for heating and chilling.

The hot water faucet is equipped with a two-step child safety lock. To dispense hot water, you must first push the red safety button inward and then press the hot water lever. This mechanism helps prevent accidental burns.

5.3 Endikatè ki ap dirije

The control panel features LED lights that indicate the status of the dispenser:

• Endikatè pouvwa: Limen lè inite a limen.
• Endikatè chofaj: Illuminates when the hot water heating element is active.
• Endikatè refwadisman: Illuminates when the cold water cooling system is active.
• Water Bottle Empty Indicator: Illuminates when the water bottle in the bottom compartment is empty and needs replacement.

6. Antretyen

6.1 Fonksyon Oto-Netwayaj

This dispenser features an interior UV light for a self-clean function. Refer to the specific instructions provided with your unit for activating this cycle. Regular use of the self-clean function helps maintain water quality and prevent bacterial growth.

6.2 Netwayaj ekstèn

• Unplug the dispenser from the power outlet before cleaning.
• Siye sifas eksteryè yo ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse thoroughly and dry before reinserting.

6.3 Vide Inite a

If the dispenser will not be used for an extended period or needs to be moved, it should be drained:

1. Deploge distribitè a epi retire boutèy dlo a.
2. Place a bucket under the drain plug located at the back of the unit.
3. Remove the drain plug to allow all water to empty from the reservoirs.
4. Yon fwa dlo a fin vide, remete bouchon drenaj la byen fèm.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

The VECYS Bottom Loading Water Dispenser (Model BY607WP) is backed by a 1-ane garanti from the date of purchase. This warranty covers manufacturing defects and ensures the product's reliability under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact VECYS customer support. Please have your model number (BY607WP) and proof of purchase available when contacting support.