BORUIT RJ-1156 LED Rechargeable Headlamp Manyèl itilizatè

1. Enstalasyon batri ak premye chaj la

The BORUIT RJ-1156 headlamp uses two rechargeable Lithium-Ion batteries. Ensure batteries are correctly inserted before first use. It is recommended to fully charge the headlamp before its initial operation.

This image illustrates the DC charging port, the battery indicator light, and the compartment for the two rechargeable batteries. The battery indicator shows red when charging and green when fully charged.

1. Jwenn konpatiman batri a sou dèyè tèt la.amp inite.
2. Open the compartment and insert the two Lithium-Ion batteries, ensuring correct polarity (+/-).
3. Fèmen lòj batri a byen.
4. Connect the DC charging cable to the charging port on the battery pack.
5. Plug the other end of the charging cable into a compatible USB power adapter (not included).
6. The battery indicator light will show red during charging and turn green when fully charged.

2. Mete bann tèt la

Headl laamp comes with an adjustable elastic headband for comfortable wear.

1. Thread the elastic headband through the designated slots on the headlamp inite.
2. Adjust the straps to ensure a snug and comfortable fit on your head.

3. Attaching the Bike Clip (Optional)

For bicycle use, the headlamp unit can be detached and mounted using the provided bike clip.

This image displays the headlamp unit separated from the headband and connected to the bike clip, ready for bicycle mounting.

1. Locate the disassembly button at the bottom of the headlamp inite.
2. Press the button and push the headlamp unit forward to detach it from the headband bracket.
3. Secure the bike clip to your bicycle handlebars.
4. Slide the detached headlamp unit onto the bike clip until it clicks into place.

1. Limen/Etenn ak Seleksyon Mòd

This image highlights the waterproof and non-slip switch button for controlling the headlampfonksyon yo.

Headl laamp features a single switch button for controlling power and light modes.

1. Pou limen: Press the switch button once. The headlamp will activate in High White Light mode.
2. Pou Chanje Mòd: Press the switch button repeatedly to cycle through the modes: High White Light → Low White Light → Red Light.
3. Pou etenn: After cycling through all modes, press the button one more time, or press and hold the button for approximately 2 seconds in any mode.

This image demonstrates the three available light modes: High White Light, Low White Light, and Red Light, showing their appearance in a dark environment.

2. Ajiste Lamp Ang tèt

This image illustrates the 90-degree adjustable lamp head, allowing users to direct the light as needed.

Headl laamp unit can be tilted up to 90 degrees to direct the light beam precisely where needed.

1. Gently hold the headlamp unit and tilt it up or down to your desired angle.
2. The mechanism is designed to hold the chosen angle securely.

3. Using the Red Light Function

This image demonstrates the red light function, highlighting its utility for preserving night vision and avoiding disturbance to animals, such as during beekeeping.

The red light mode is beneficial for specific situations:

• Night Vision Preservation: Red light does not easily stimulate the eyes, helping to maintain natural night vision.
• Zanmitay pou bèt sovaj: Less likely to startle animals, making it suitable for hunting, fishing, or wildlife observation.
• Insect Attraction: Red light is less attractive to insects compared to white light.

1. Netwayaj

• Siye tèt laamp body with a soft, damp twal.
• Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Ensure the charging port cover is securely closed to maintain waterproof integrity.

2. Swen ak Depo Batri

• Recharge the batteries regularly, even if the headlamp is not frequently used, to prolong battery life.
• Sere tèt laamp nan yon kote ki fre, sèk lwen limyè solèy la dirèk ak tanperati ekstrèm.
• If storing for an extended period, charge the batteries to approximately 50% capacity.