BSEED 1800W Single Outlet Surge Protector User Manual

1. Entwodiksyon

Thank you for choosing the BSEED 1800W Single Outlet Surge Protector. This device is designed to safeguard your valuable home appliances from electrical disturbances such as high/low voltage, power surges, spikes, and power failures. Its intelligent design includes a delay function to protect sensitive equipment during power restoration. Please read this manual carefully before use to ensure proper operation and longevity of your surge protector and connected appliances.

2. Enfòmasyon sou Sekirite

• Itilize andedan kay la sèlman: This surge protector is designed for indoor use in dry locations. Do not expose to moisture or wet conditions.
• Evalyasyon elektrik: Do not exceed the electrical rating of 120V, 15A, 1800W. Overloading the device can cause damage or fire.
• Atè: Ensure the wall outlet is properly grounded. The surge protector requires a grounded outlet for effective protection.
• Vantilasyon: Do not block the ventilation openings of the surge protector.
• Timoun ak bèt kay: Kenbe lwen timoun ak bèt kay.
• Domaj: Do not use if the surge protector or its cord appears damaged.
• Demonte: Pa eseye demonte oswa modifye aparèy la. Konfye tout antretyen bay pèsonèl kalifye.

3. Pwodwi Features

The BSEED Surge Protector offers robust protection and user-friendly features:

• Pwoteksyon konplè: Guards against high/low voltage, power failure, spikes, instantaneous surges, voltage fluctuations, and load dumping.
• Koupe Otomatik: Dekonekte kouran an otomatikman lè vòltage is outside safe limits.
• Fonksyon reta 3 minit: Prevents damage to appliances from rapid power cycling by delaying power restoration after an outage oswa voltage evènman.
• Limyè endikatè: Clear LED indicators for High/Low Protect, 5 Min Delay, and Normal/OK status.
• Konstriksyon dirab: Made from high-quality, fire-resistant ABS material (UL94-V-1.0 grade).
• Konsepsyon kontra enfòmèl ant: Single outlet design that is space-saving and does not obstruct adjacent outlets.
• Lajè konpatibilite: Suitable for refrigerators, computers, TVs, microwave ovens, water dispensers, ice makers, dishwashers, and other home appliances.

Figi 3.1: Plis paseview of the surge protector's indicator lights and single AC outlet.

Figi 3.2: Compact design and dimensions of the surge protector.

4. Enstalasyon

The BSEED Surge Protector features a simple plug-and-play design for easy installation.

1. Dekonpoze: Retire pwoteksyon kont surtansyon an nan anbalaj li avèk prekosyon.
2. Enspekte: Tcheke aparèy la pou wè si li gen nenpòt domaj vizib. Pa sèvi avè l si li domaje.
3. Ploge nan: Insert the surge protector directly into a standard 120V AC wall outlet. Ensure it is firmly seated.
4. Konekte aparèy: Plug your appliance (e.g., refrigerator, TV, PC) into the single AC outlet on the front of the surge protector.

The device will automatically begin its protection sequence. Refer to the Operating Instructions section for details on indicator lights.

Figi 4.1: The compact design allows for use without obstructing adjacent outlets.

5. Operasyon Enstriksyon

The surge protector uses three indicator lights to communicate its status:

• High/Low Protect (Red Light): This light illuminates when the voltage is outside the safe operating range (either too high or too low). When this light is on, power to the connected appliance is cut off to prevent damage.
• 5 Min Delay (Yellow Light): This light indicates that the device is in its 3-minute delay period. This delay occurs after power is restored following an outage oswa voltage event, allowing the electrical system to stabilize before reconnecting power to the appliance.
• Normal/OK (Green Light): This light indicates that the voltage is within the safe operating range and power is being supplied to the connected appliance.

Power Restoration Sequence:

1. Upon initial plug-in or after a power outage, the device will enter a 3-minute delay period (Yellow Light on).
2. During this delay, the surge protector monitors the voltage.
3. Yon fwa ke voltage stabilizes and the 3-minute delay concludes, the Yellow Light will turn off, and the Green Light will illuminate, supplying power to your appliance.

Manual Override (ON Button):

The ON button allows you to skip the 3-minute delay if you are present and confirm the voltage has returned to normal. Pressing the ON button during the delay period will immediately restore power to the appliance, provided the voltage ki estab.

Figi 5.1: Detaye view of indicator lights and functions.

6. Antretyen

The BSEED Surge Protector requires minimal maintenance.

• Netwayaj: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive chemicals.
• Enspeksyon: Periodically inspect the device for any signs of wear or damage, especially after electrical storms or power fluctuations.
• Depo: If storing the device, keep it in a cool, dry place away from direct sunlight and extreme temperatures.

NAN. Depanaj

If you encounter issues with your surge protector, refer to the following common problems and solutions:

8. Espesifikasyon

9. Garanti ak sipò

BSEED is committed to providing high-quality products and customer satisfaction.

• Garanti: This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact customer service for specific warranty terms and duration.
• Sipò Kliyan: If you have any questions, requests, or doubts regarding your BSEED Surge Protector, our customer service team is available to assist you 24 hours a day.

Enfòmasyon pou kontakte:

Please refer to the contact details provided on your product packaging or the official BSEED websit la pou jwenn enfòmasyon sipò ki pi ajou yo.