uxcell V-156-1C25 Micro Limit Switch Instruction Manual

1. Entwodiksyon

This manual provides essential information for the safe and effective installation, operation, and maintenance of the uxcell V-156-1C25 Micro Limit Switch. This precision component is designed to monitor the position of moving parts in various mechanical systems and can be integrated into AC/DC control circuits for terminal limit protection.

Please read this manual thoroughly before using the product to ensure proper function and to prevent potential hazards.

Six uxcell V-156-1C25 micro limit switches in a package

Figure 1: Package containing six uxcell V-156-1C25 Micro Limit Switches.

2. Spécifications pwodwi

The uxcell V-156-1C25 Micro Limit Switch features a robust design suitable for various industrial and home applications. Key specifications are detailed below:

Spesifikasyon	Valè
Modèl	V-156-1C25
Kalite kontak	1 Nòmalman Ouvè (NO) + 1 Nòmalman Fèmen (NC)
Kouran Voltage Rating	15A 125/250VAC
Degre Pwoteksyon	IP40 (Dust ingress protected, protected against water spray)
Overall Size (LWH)	28mm x 16mm x 10mm (1.1 "x 0.63" x 0.39 ")
Longè PIN	9mm (0.35")
Kalite aliye	Sifas mòn
Konte inite	6 pou chak pake

Diagram showing dimensions and contact types of the V-156-1C25 micro limit switch

Figure 2: Detailed dimensions and contact configuration of the micro limit switch.

3. Enfòmasyon sou Sekirite

WARNING: Electrical components can cause injury or death. Always disconnect power before installation, maintenance, or troubleshooting. Installation should only be performed by qualified personnel.

Ensure the power supply matches the switch's voltage ak evalyasyon aktyèl yo.
Avoid exposing the switch to conditions beyond its IP40 rating (e.g., direct water immersion).
Verify all connections are secure to prevent short circuits or loose contacts.
Do not modify the switch or its components.

4. Enstalasyon ak Enstalasyon

The V-156-1C25 micro limit switch is designed for surface mounting and integration into control circuits.

4.1. Monte

Identify a suitable mounting location where the switch's lever can be actuated by the moving part it is intended to monitor.
Secure the switch using appropriate fasteners through its mounting holes. Ensure it is firmly attached to prevent movement during operation.
Adjust the position of the switch or the actuator arm to ensure reliable contact and release with the moving part.

4.2. fil elektrik

The switch features 1 Normally Open (NO) and 1 Normally Closed (NC) contact, along with a Common (COM) terminal. Refer to the markings on the switch for correct terminal identification.

COM (Komen): This is the shared terminal for both NO and NC contacts.
NON (Nòmalman louvri): This contact is open (no current flow) when the switch is in its unactuated (rest) position and closes (allows current flow) when the switch is actuated.
NC (Nòmalman fèmen): This contact is closed (allows current flow) when the switch is in its unactuated (rest) position and opens (stops current flow) when the switch is actuated.

Connect the switch into your AC or DC control circuit according to your application's requirements. Always ensure power is disconnected before making any wiring connections.

Fèmen view of the uxcell V-156-1C25 micro limit switch showing terminals and lever

Figi 3: Devan view of the micro limit switch, highlighting the lever and electrical terminals.

5. Prensip Operasyon yo

The uxcell V-156-1C25 micro limit switch operates by detecting the presence or absence of a mechanical object. When the lever arm is actuated by a moving part, the internal contacts switch their state:

The Normally Open (NO) contact closes.
The Normally Closed (NC) contact opens.

This change in contact state can be used to trigger or stop a process, activate an indicator, or provide feedback to a control system. The switch is designed for high precision and reliable operation over many cycles.

6. Antretyen

The V-156-1C25 micro limit switch is designed for durability and requires minimal maintenance. However, periodic checks can extend its lifespan and ensure reliable operation.

Enspeksyon: Regularly inspect the switch for any physical damage, loose connections, or excessive wear on the lever arm.
Netwayaj: Due to its IP40 rating, the switch is protected against dust. If dust accumulation is observed, gently clean the exterior with a dry, soft cloth. Avoid using liquids or abrasive cleaners.
Actuation Check: Periodically verify that the switch actuates smoothly and consistently when triggered by the moving part.
Entegrite fil elektrik: Asire w ke tout koneksyon fil elektrik yo rete byen fèm epi san korozyon.

Toujou dekonekte kouran an anvan ou fè nenpòt antretyen oswa enspeksyon.

NAN. Depanaj

If the micro limit switch is not functioning as expected, consider the following troubleshooting steps:

Pwoblèm	Kòz posib	Solisyon
Switch la pa aktive	Actuator arm misaligned Obstriksyon mekanik Damaged lever arm	Adjust switch position or actuator. Retire tout obstak. Ranplase switch la si li domaje.
No electrical signal change	Fil elektrik ki pa kòrèk Koneksyon ki lach Internal switch failure Pa gen kouran nan sikwi a	Verify wiring against diagram (COM, NO, NC). Tighten all terminal connections. Test switch continuity with a multimeter (power off). Replace if faulty. Check power supply to the circuit.
Operasyon tanzantan	Montaj ki lach Vibration Worn contacts	Securely fasten the switch. Address sources of excessive vibration. Ranplase switch la.

If problems persist after attempting these solutions, contact uxcell customer support or consult a qualified electrician.

8. Garanti ak sipò

For warranty information and technical support regarding your uxcell V-156-1C25 Micro Limit Switch, please refer to the official uxcell websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la pou reklamasyon garanti.

Enfòmasyon pou kontakte:

Mak: uxcell
Websit: Visit the uxcell Store on Amazon
Nimewo Modèl: V-156-1C25
Nimewo Pati: a24062900ux0690

uxcell V-156-1C25