FlyRobo BM730 3-in-1 Voltage Current Power Meter User Manual

Entwodiksyon

The FlyRobo BM730 is a compact 3-in-1 digital meter designed to measure DC voltage, current, and power simultaneously. It features a clear 4-digit LED display for easy reading and is suitable for monitoring battery levels, solar panels, and other DC systems. This manual provides essential information for safe and effective operation.

Enfòmasyon sou Sekirite

• Always ensure proper wiring connections before applying power.
• Pa depase vol espesifye atage (0-100V DC) and current (10A) limits.
• Evite kontak ak sikui ki anba kouran.
• This device is intended for DC circuits only.
• Kenbe soti nan atenn timoun yo.

Kontni pake

Verifye ke tout atik yo prezan:

• 1x FlyRobo BM730 3-in-1 Voltage Current Power Meter
• 1x Wiring Harness for Power Supply (Thin Red/Black Wires)
• 1x Wiring Harness for Current Measurement (Thick Red/Black Wires)

Image: The BM730 meter shown with its two included wiring harnesses. One harness has thin red and black wires for power, and the other has thicker red and black wires for current measurement.

Pwodwi souview

The BM730 meter features a multi-color LED display and control buttons for operation.

Imaj: Anlè view showing the digital display for voltage (V), current (A), and power (W), along with control buttons (Up, M, Down, R). Bottom view shows the circuit board with connection terminals.

Endikatè ekspozisyon:

• V (Volts): Red display, indicates DC voltage.
• A (Amperes): Green display, indicates DC current.
• W (Watts): Blue display, indicates DC power.

Bouton kontwòl:

• Flèch moute: Used for navigation or increasinvalè g yo.
• M (Mòd): Used to switch display modes or confirm settings.
• Desann flèch: Used for navigation or decreasinvalè g yo.
• R (Reyajiste): Used to reset readings or settings.

Espesifikasyon

• Voltage Range: 0V a 100V DC
• Ranje aktyèl: 0A to 10A DC
• Pouvwa Range: 0W to 1000W (calculated from V*A)
• Ekspozisyon: 4-Digit LED (Red for V, Green for A, Blue for W)
• Dimansyon (L x W x H): 80mm x 41mm x 26mm
• Kalite mezi: Ammeter, Voltmeter, Wattmeter
• Sous pouvwa: Battery Powered (self-powered from measured circuit or external supply)

Enstalasyon ak Enstalasyon

Proper wiring is critical for the safe and accurate operation of the BM730 meter. Refer to the diagram below for connection details.

Koneksyon fil elektrik:

1. Power Supply for Meter (Thin Red/Black Wires):

   Connect the thin red wire to the positive (+) terminal of your DC power source (0-100V).

   Connect the thin black wire to the negative (-) terminal of your DC power source.

   Note: The meter can be self-powered from the circuit it is measuring, or powered by a separate supply within its voltage ranje.

2. Current Measurement (Thick Red/Black Wires):

   The thick red wire (IN+) and thick black wire (OUT-) are for current measurement. These wires must be connected in series with the load you wish to measure.

   Connect the thick red wire (IN+) to the positive side of the load.

   Connect the thick black wire (OUT-) to the negative side of the load, completing the circuit back to the power source.

   Enpòtan: Do not connect the thick current wires directly across the power source; this will short the circuit and damage the meter or power source.

Asire ke tout koneksyon yo an sekirite ak izole pou anpeche sikui kout.

Enstriksyon Operasyon

1. Pouvwa sou: Once correctly wired, apply power to the circuit. The meter's display will illuminate, showing voltaglekti e, kouran, ak pouvwa.
2. Ekspozisyon lekti:

   The top red display shows voltage nan Volts (V).

   The middle green display shows current in Amperes (A).

   The bottom blue display shows power in Watts (W).

3. Fonksyon bouton:

   The buttons (Up, M, Down, R) are typically used for fine adjustment, calibration, or alarm settings. Refer to specific advanced usage guides if available for detailed button functionalities. For basic operation, the meter displays readings automatically.
4. Overvoltage/Overcurrent Alarm: The meter supports an overvoltage and overcurrent sound alarm function. If the measured values exceed preset thresholds, an audible alarm may sound.

Antretyen

• Keep the meter clean and dry. Use a soft, dry cloth to wipe the display and casing.
• Avoid exposing the meter to extreme temperatures, humidity, or corrosive environments.
• Pa eseye louvri c la.asing or modify the internal circuitry, as this will void any warranty and may cause damage.
• Sere nan yon kote ki an sekirite lè yo pa itilize.

Depanaj

Kontè a pa limen:

Check the thin red and black power supply wires. Ensure they are correctly connected to a DC power source within the 0-100V range. Verify the power source is active.

Voltage displays, but current/power shows 0:

Ensure the thick red (IN+) and black (OUT-) current measurement wires are correctly connected in series with the load. The load must be drawing current for a reading to appear.

Lekti ki pa egzak:

Verify all connections are secure and free from corrosion. Ensure the meter is operating within its specified voltage ak ranje aktyèl yo.

Audible alarm sounds:

This indicates an overvoltage or overcurrent condition. Check your circuit for excessive voltage or current draw and adjust as necessary.

Garanti ak sipò

For warranty information or technical support, please contact FlyRobo directly. Refer to your purchase documentation for specific warranty terms.

Enfòmasyon pou kontakte manifakti: flyroboofficial@gmail.com