BONTEC Full Motion TV Monitor Wall Mounts User Manual

Entwodiksyon

Thank you for choosing BONTEC Full Motion TV Monitor Wall Mounts. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new wall mounts. Please read this manual thoroughly before installation and keep it for future reference. This product bundle includes two distinct models: the CT129 mount for smaller TVs (13-42 inches) and the CT139M mount for larger TVs (32-75 inches).

Enfòmasyon sou Sekirite

WARNING: Failure to read and follow all instructions may result in personal injury or property damage.

• Asire w ke sifas montaj la ka sipòte pwa konbine montaj la ak ekran an san danje.
• PA MONTE LI SOU KLOZÈS POU KONTWÒL LA POU KONTWÒL LA. This mount is designed for installation on solid concrete walls, brick walls, or wood studs.
• Toujou sèvi ak yon detektè poto an bwa pou lokalize poto an bwa yo avèk presizyon.
• Do not exceed the maximum weight capacity specified for each mount: 55 lbs (25 kg) for CT129 and 132 lbs (60 kg) for CT139M.
• Ensure all screws are securely tightened before use. Do not overtighten.
• Kenbe timoun ak bèt kay lwen pandan enstalasyon an.
• If you have any doubts about the installation, consult a qualified professional.

Kontni pake

Please verify that all components are present and undamaged before beginning installation. Refer to the parts list provided in your product packaging for specific quantities of each item.

Imaj: Plis paseview of the BONTEC CT129 and CT139M wall mounts, along with two HDMI cables typically included in the package.

Enstalasyon ak Enstalasyon

Chèk Pre-Enstalasyon

• Tcheke modèl VESA televizyon an: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This is your VESA pattern.
• Tcheke pwa televizyon an: Ensure your TV's weight does not exceed the maximum capacity of the chosen mount.
• Idantifye Kalite Mi: Determine if your wall is concrete, brick, or wood stud. This will dictate the appropriate hardware and drilling method.

Image: Illustration of compatible wall types for secure installation: concrete, wood stud, and brick. A critical warning indicates that the mount should not be installed on drywall alone.

Step-by-Step Installation (General Guide)

1. Mete sipò televizyon yo sou televizyon an: Secure the vertical mounting brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and level.
2. Make twou perçage yo: Hold the wall plate against the wall at your desired mounting height. Use a pencil to mark the drilling locations. For wood studs, ensure marks are centered on the stud. For concrete/brick, use a level to ensure accuracy.
3. Fè twou pilòt: Drill pilot holes at the marked locations using the recommended drill bit size for your wall type.
4. Plak miray pou monte: Attach the wall plate to the wall using the provided lag bolts and washers. Tighten securely, but do not overtighten.
5. Pandye televizyon an sou yon plak miray: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated.
6. Secure TV to Mount: Use the safety screws or locking mechanisms on the brackets to secure the TV to the wall plate, preventing accidental dislodgement.

VESA konpatibilite

The CT129 mount supports VESA patterns including 75x75mm, 100x100mm, 100x200mm, and 200x200mm.

Image: Visual representation of the different VESA mounting patterns compatible with the CT129 mount, including dimensions for each configuration.

The CT139M mount supports a wider range of VESA patterns, including 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, and 600x400mm.

Image: This diagram illustrates the range of compatible TV screen sizes (32" to 75") and the corresponding VESA mounting patterns supported by the CT139M mount, including a note about potential protrusion for smaller TVs.

Operasyon ak Ajisteman

CT129 Mount Adjustments (13-42 inch)

• Enklinezon: Adjust the screen tilt by +/- 10° to reduce glare and optimize viewing.
• Swivel: Swivel the TV +/- 90° left or right for flexible viewang ing.
• Wotasyon: Rotate the screen 360° for portrait or landscape orientation.
• Ekstansyon/Retrè: The mount extends up to 15.7 inches (40 cm) from the wall and retracts to a slim 2.7 inches (6.8 cm) to save space.

Image: This illustration demonstrates the extension and retraction range of the CT129 mount, showing it can extend up to 15.7 inches and retract to 2.7 inches from the wall.

CT139M Mount Adjustments (32-75 inch)

• Enklinezon: Adjust the screen tilt by +/- 8° for optimal viewing.
• Swivel: Swivel the TV up to 180° left or right, providing a wide range of viewpozisyon yo.
• Ajisteman Nivo: Fine-tune the TV level by +/- 3° after installation.
• Long Reach Extension: The articulated arm extends from 2.6 inches (6.6 cm) to an impressive 40.9 inches (104 cm) from the wall, offering maximum flexibility and space-saving when retracted.

Image: This diagram highlights the extensive extension range of the CT139M mount, showing it can extend from 2.6 inches to 40.9 inches, and indicates its robust 132 lbs (60 kg) weight capacity.

Image: This illustration demonstrates the 180-degree swivel range of the CT139M mount, enabling users to adjust the TV for optimal viewing from various positions in a room.

Antretyen

• Netwayaj: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the finish.
• Tèks Peryodik: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
• Lubrifikasyon: The articulating joints are designed for smooth movement. If any stiffness occurs over time, a small amount of silicone-based lubricant can be applied to the moving parts.

Depanaj

• Televizyon Pa Nivo: If the TV appears unlevel after installation, check the level adjustment feature on your mount (CT139M has +/- 3° level adjustment). For CT129, ensure the wall plate and TV brackets were installed perfectly level.
• Difikilte pou ajiste mouvman: Ensure no cables are snagged or obstructing movement. Check that all pivot points are free from debris. If the mount feels too stiff or too loose, check the tension screws on the articulating arms and adjust as needed.
• Mòn nan santi l enstab: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are properly installed and the wall type is suitable for the mount. Do not re-mount the TV until stability is confirmed.

Espesifikasyon pwodwi

Garanti ak sipò

BONTEC products are manufactured with quality and durability in mind. For any questions, technical assistance, or to report missing/damaged parts, please contact BONTEC customer support. Please have your product model number (CT129 or CT139M) and purchase information ready when contacting support.

For the most up-to-date warranty information and support contact details, please refer to the official BONTEC websit la oswa enfòmasyon kontak ki vini ak anbalaj pwodwi ou a.