1. Entwodiksyon
This manual provides instructions for the installation, operation, and maintenance of your VIVOHOME Bathroom Exhaust Fan with Light. This unit is designed to effectively ventilate moisture, smoke, and odors from bathrooms and similar indoor spaces, while providing illumination.
Image 1.1: VIVOHOME Bathroom Exhaust Fan with Light installed in a modern bathroom ceiling, providing both ventilation and illumination.
2. Enfòmasyon sou Sekirite
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Toujou dekonekte kouran an nan disjonktè a anvan ou enstale oswa fè antretyen sou vantilatè a.
- All wiring must comply with local and national electrical codes. If you are unsure, consult a qualified electrician.
- Do not install this fan in a ceiling with insulation that exceeds the maximum recommended thickness.
- Ensure the fan is securely mounted to a structural element of the building.
- Do not use this fan in areas where flammable gases or vapors may be present.
3. Pwodwi Features
- Vantilasyon efikas: Provides 110 CFM (Cubic Feet Per Minute) airflow, suitable for rooms 100 to 135 sq. ft. Operates at 900 RPM to effectively remove moisture and odors.
- Operasyon trankil: Engineered to operate at a low noise level of less than 1 sone, ensuring a peaceful environment.
- Limyè ki ap dirije entegre: Features a 10W round LED light with 6000K cool white color temperature and 1000 lumens brightness for ample lumière.
- Konstriksyon dirab: Aluminum alloy housing provides durability and corrosion resistance. The ABS panel enhances appearance.
- Tcheke Valv: An integrated check valve at the air outlet prevents backflow of odors, smoke, and water vapor when the fan is off. It opens automatically when the fan is powered on.
- Enstalasyon fasil: Designed for straightforward ceiling mount installation with detailed instructions provided. The fan and light can be wired for simultaneous or separate operation.
Imaj 3.1: Entèn view of the fan, illustrating the aluminum alloy housing, ABS plastic panel, and the check valve mechanism that prevents backflow.
Image 3.2: The integrated 10W LED light provides 6000K cool white illumination at 1000 lumens.
4. Espesifikasyon
| Spesifikasyon | Valè |
|---|---|
| Nimewo Modèl | VH1591CA |
| Kapasite Flow Air | 110 CFM |
| Nivo bri | 1 Sone |
| Vitès motè | 900 RPM |
| Wattage | 45 Watts |
| Voltage | 120 Volts |
| Kalite limyè | dirije |
| Limyè Koulè Tanperati | 6000K (Blan fre) |
| Limyè klète | 1000 Lumen |
| Dimansyon pwodwi (D x W x H) | 12.4" x 12.4" x 5.7" |
| Ceiling Opening Size | 9.4" x 10.2" |
| Duct Connector Diameter | 3.8" |
| Materyèl | Aluminum Alloy (Housing), ABS (Panel) |
| Kalite aliye | Mòn plafon |
Image 4.1: Detailed dimensions of the fan unit and the recommended ceiling opening for installation.
5. Enstalasyon
Follow these steps for proper installation. Ensure power is disconnected before beginning.
- Prepare Ceiling Opening: Mark and cut a ceiling opening of 9.4 inches by 10.2 inches. Ensure there is sufficient space above the ceiling for the fan housing and ductwork.
- Mount Fan Housing: Insert the fan housing into the prepared opening. Secure the housing to a ceiling joist or suitable structural support using appropriate fasteners.
- Konekte kanalizasyon yo: Connect a 4-inch diameter duct to the fan's duct connector. Secure with duct tape or clamps to ensure an airtight seal.
- Fil elektrik: Refer to the wiring diagram below for electrical connections. Connect the fan and light wires to your household electrical supply. Ensure all connections are secure and insulated.
- Attach Grille/Panel: Connect the LED light's electrical connector. Secure the grille/panel to the fan housing using the provided springs or clips.
Video 5.1: An official VIVOHOME video demonstrating the installation process of the 110 CFM Bathroom Exhaust Fan with Light, including preparing the ceiling opening, mounting the unit, and connecting the grille.
6. Dyagram fil elektrik
The fan unit features a 4-wire port for electrical connections. Ensure correct wiring to prevent damage and ensure proper function.
- Fil tè: Typically yellow or green/yellow. Connect to the household ground wire.
- Lead Wire (Fan): Typically black. Connect to the switched hot wire for fan operation.
- Lead Wire (LED): Typically brown. Connect to the switched hot wire for light operation.
- Fil net: Typically white. Connect to the household neutral wire.
You can wire the fan and light to operate independently using separate switches, or together using a single switch.
Image 6.1: Wiring connections for the fan and light, showing the color-coded wires for ground, fan power, LED power, and neutral.
7. Operasyon
Once installed and wired correctly, operate the fan and light using your wall switches. Depending on your wiring configuration, you can control the fan and light either simultaneously or independently.
- Operasyon Fan: Turn on the switch connected to the fan's lead wire to activate ventilation.
- Limyè operasyon: Turn on the switch connected to the LED light's lead wire to activate illumination.
8. Antretyen
Antretyen regilye asire pèfòmans optimal ak lonjevite vantilatè aspirasyon ou an. Toujou dekonekte kouran an anvan ou fè nenpòt antretyen.
- Cleaning the Grille/Panel: Periodically remove the grille/panel and wash it with mild soap and water. Rinse thoroughly and dry completely before reattaching.
- Netwayaj lam vantilatè yo: With the power off, gently wipe the fan blades and interior of the housing with a damp twal pou retire pousyè ak debri. Pa sèvi ak pwodui netwayaj abrazif.
- Motè: The motor is permanently lubricated and requires no additional oiling.
NAN. Depanaj
Si ou rankontre pwoblèm ak vantilatè ou a, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fanatik pa fonksyone | Pa gen kouran, fil elektrik ki lach, switch ki gen pwoblèm | Check circuit breaker. Verify all wiring connections. Test the switch. |
| Limyè pa klere | No power, loose wiring, faulty LED connector | Check circuit breaker. Verify light wiring. Ensure LED connector is fully seated. |
| Fanatik fè bwi | Loose mounting, debris in fan blades, damaged motor | Ensure fan housing is securely mounted. Clean fan blades. If noise persists, contact support. |
| Pòv vantilasyon | Blocked ductwork, dirty fan blades, incorrect room size | Check ductwork for obstructions. Clean fan blades. Ensure fan capacity matches room size. |
10. Garanti ak sipò
For warranty information or technical support, please contact VIVOHOME customer service. Keep your purchase receipt as proof of purchase.
Contact information can typically be found on the VIVOHOME official websit la oubyen sou anbalaj pwodwi a.