Maxxima Horizontal LED Step Light Instruction Manual

1. Pwodwi souview

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, damp, oswa kote sèk.

Figi 1: Devan view of the Maxxima Horizontal LED Step Light in black finish.

2. Enfòmasyon sou Sekirite

• AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan fizib la oswa disjonktè a anvan enstalasyon oswa antretyen.
• Pwodwi sa a dwe enstale an akò ak kòd enstalasyon ki aplikab pa yon moun ki abitye ak konstriksyon ak operasyon nan pwodwi a ak danje ki enplike.
• Asire w ke tout koneksyon elektrik yo byen fèm epi yo konfòm ak kòd ak òdonans lokal yo.
• Pa enstale aparèy sa a ak men mouye oswa pandan w ap kanpe sou yon sifas mouye oswa d.amp sifas yo.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• Do not modify the fixture or use it for purposes other than its intended use.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• Materyèl pou monte (vis, nwa fil)
• Manyèl Enstriksyon (dokiman sa a)

Figi 2: Eksploze view showing the step light components, including the faceplate and internal module.

4. Espesifikasyon

5. Enstriksyon Enstalasyon

Anvan ou kòmanse: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. Prepare Bwat Koneksyon an: Ensure you have a standard one-gang junction box installed in the desired location.
2. Konekte fil elektrik:
   • Konekte a nwa fil soti nan aparèy la rive nan la cho (black) wire from the junction box.
   • Konekte a blan fil soti nan aparèy la rive nan la net (white) wire from the junction box.
   • Konekte a vèt fil soti nan aparèy la rive nan la tè (green or bare copper) wire from the junction box.
   Sere tout koneksyon yo ak boulon fil yo bay la.
3. Chwazi Tanperati Koulè (CCT): Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Mete plak fasad la an kontak: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. Retabli pouvwa: Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

Gid videyo enstalasyon

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. Operasyon Enstriksyon

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. Antretyen

The LED step light requires minimal maintenance. To clean the fixture:

• Ensure power is OFF before cleaning.
• Siye sifas ekstèn lan avèk yon twal mou,amp twal.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

NAN. Depanaj

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• Limyè pa limen:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Ensure the fixture is receiving the correct voltage (120VAC).
• Light flickers or dims:
  • Tcheke pou koneksyon fil ki lach.
  • Ensure the fixture is not connected to a dimmer switch unless explicitly rated for dimming (this model is not specified as dimmable).
  • Verifye yon ekipman pou kouran ki estab.
• Incorrect color temperature:
  • Fèmen pouvwa aparèy la.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. Garanti ak sipò

This Maxxima Horizontal LED Step Light is covered by a 3-ane garanti soti nan dat acha a. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

Enfòmasyon pou kontakte: Refer to the Maxxima websit entènèt la oswa dokiman acha ou a pou jwenn enfòmasyon kontak ki pi resan yo.