BuTure VAC Professional-Grade 7000A Peak Car Battery Jump Starter Beta03 Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the safe and effective use of your BuTure VAC Professional-Grade 7000A Peak Car Battery Jump Starter, Model Beta03. This device is designed to start vehicles with low-voltage or completely drained batteries, and also functions as a portable power bank for various electronic devices.

Key features include a 7000A peak current (5000A CCA), a 26800mAh power bank with USB outputs, a 160W DC output, a 400 lumen emergency light, and a smart LCD screen. It is engineered to operate in extreme temperatures and incorporates multiple safety protections.

Kontni pake

Verifye ke tout atik ki nan lis anba a yo prezan nan pakè ou a:

• 1x BuTure VAC Jump Starter (Model Beta03)
• 1x Extended Smart Jumper Cable
• 1x USB-C Chaje Kab
• 1x EC5 Cigarette Lighter Adapter
• 1x manyèl enstriksyon
• 1x Rugged Carrying Case

Image: The jump starter unit, smart jumper cables, USB-C charging cable, EC5 cigarette lighter adapter, instruction manual, and carrying case.

Pwodwi souview

The BuTure VAC Beta03 jump starter is a versatile device designed for vehicle emergency starts and portable power needs. It features a robust design and intelligent safety systems.

Image: The main jump starter unit, showing its display, USB ports, and the included jumper cables and DC adapter.

Karakteristik kle:

• High Starting Power: 7000A Peak Current and 5000A Cold Cranking Amps (CCA) for starting all gas engines and up to 10.0L diesel engines.
• Fonksyon Fòse Kòmanse: Provides a dual safeguard for starting completely dead or low-voltage pil.
• Gwo kapasite batri: 26800mAh internal battery for multiple jump starts and extended power bank use.
• Multi-Purpose Power Bank: Two quick USB ports and a 160W DC output for charging smartphones, tablets, and powering 12V devices like tire pumps or car refrigerators.
• Ekleraj Ijans: 400 lumen light with 270° wide-angle illumination, offering Flash, SOS, and Strobe modes. Can also function as a warning triangle.
• Ekran LCD entelijan: 3.2-inch display shows battery level, operational status, and error messages clearly, even in sunlight.
• Pwoteksyon Sekirite Avanse: Certified 10 intelligent protection systems, including short circuit, over-current, over-charge, and reverse polarity protection.
• Lajè ranje tanperati: Operates effectively in temperatures from -20℃ to 60℃ (-4℉ to 140℉).

Enstalasyon ak Premye Chajman

Inisyal chaj:

1. Upon receiving your jump starter, it is recommended to fully charge it before first use.
2. Connect the included USB-C charging cable to the "USB-C IN" port on the jump starter.
3. Connect the other end of the USB-C cable to a suitable USB wall adapter (not included) or a car charger.
4. The LCD screen will display the charging progress. Charge until the screen shows 100%.

A full charge typically takes a few hours depending on the power of your USB adapter. Ensure the device is fully charged for optimal performance and standby time.

Enstriksyon Operasyon

1. Ale kòmanse yon machin:

Prekosyon Sekirite Enpòtan:

• Ensure the jump starter is at least 50% charged before attempting a jump start.
• Pa konekte wouj ak nwa cl aamps ansanm.
• Do not attempt to jump start a vehicle if the jump starter or cables are damaged.
• Always wear eye protection when working with car batteries.

1. Konekte kab jumper la: Insert the blue end of the smart jumper cable into the 12V jump start port on the jump starter. Ensure a firm connection. The indicator light on the smart cable will flash red and green.
2. Konekte ak batri machin nan:
   • Tache a wouj (+) clamp to the positive (+) terminal of the car battery.
   • Tache a nwa (-) clamp to the negative (-) terminal of the car battery.

   Once connected correctly, the indicator light on the smart cable will turn solid green, indicating it is ready to jump start.

3. Kòmanse Veyikil la: Go into your vehicle and start the engine.
4. Retire kab yo: Once the vehicle starts, immediately remove the jumper cables from the car battery (black first, then red) and then disconnect the smart cable from the jump starter.

Image: Visual guide for jump-starting: 1. Insert clamp plug, 2. Connect clamps to battery, 3. Start the vehicle.

Force Start Function (for completely dead batteries): If the indicator light does not turn solid green, your car battery might be completely drained. Press and hold the "FORCE START" button on the smart cable for 3 seconds until the indicator light turns solid green. Then proceed to start your vehicle. Caution: Using the Force Start function temporarily bypasses some safety features. Use with extreme care.

2. Using as a Power Bank (USB Output):

The jump starter features two USB-A output ports for charging electronic devices.

1. Connect your device's USB charging cable to one of the USB-A output ports (USB1 or USB2) on the jump starter.
2. The jump starter will automatically begin charging your device. The LCD screen will indicate "OUT" and the battery percentage.

Image: The jump starter connected to two smartphones, demonstrating its dual-device charging capability.

3. Using 160W DC Output:

The 160W DC output port can power 12V devices such as tire inflators, car vacuum cleaners, or car refrigerators.

1. Connect the EC5 cigarette lighter adapter to the 12V jump start port on the jump starter.
2. Plug your 12V device into the cigarette lighter socket of the adapter.
3. Ensure your 12V device is within the 160W power limit.

Image: The jump starter powering a tire inflator, illustrating its 160W DC output capability.

4. Using the Emergency Light:

The jump starter includes a powerful 400 lumen LED light.

1. Press the power button once to turn on the flashlight mode.
2. Press again to cycle through modes: Flashlight > SOS > Strobe > Off.
3. The SOS and Strobe modes are useful for attracting attention in emergency situations. The wide-angle light can also serve as a warning triangle.

Imaj: Yon gwo plan view of the jump starter's integrated LED light, highlighting its various modes: Flash, SOS, and Strobe.

Antretyen ak Depo

• Rechaje: Recharge the jump starter every 3-6 months, even if not used, to maintain battery health and extend its lifespan.
• Netwayaj: Siye aparèy la avèk yon twal sèk epi mou. Pa sèvi ak pwodui chimik ki agresif oswa materyèl abrazif.
• Depo: Store the jump starter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. The recommended storage temperature range is -20℃ to 60℃ (-4℉ to 140℉).
• Lavi batri: The internal battery is designed for over 1000 recharge cycles and has an approximate 24-month standby time when fully charged.

Depanaj

Espesifikasyon

Enfòmasyon sou Sekirite

Read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not operate the jump starter if it is damaged or has been dropped.
• Kenbe soti nan atenn timoun yo.
• Do not submerge the unit in water or expose it to rain.
• Do not disassemble, modify, or attempt to repair the unit.
• Sèvi sèlman ak kab jumper entelijan yo bay la.
• Ensure proper polarity when connecting to a car battery (red to positive, black to negative).
• Do not leave the jump starter connected to the car battery for extended periods after the vehicle has started.
• Avoid exposing the unit to open flames or extreme heat.
• If the battery is swollen, leaking, or emitting an odor, discontinue use immediately and contact customer support.

Garanti ak sipò

BuTure VAC provides a hassle-free warranty for this product. For any questions, concerns, or technical assistance, please contact our customer support team.

• Garanti: 365 days worry-free refund and replacement.
• Sipò teknik: Sipò teknik pou tout lavi disponib.

Please refer to the contact information provided in the quick-start guide or on the official BuTure VAC websit pou sipò.