Aigo Q1718 Mini-Tower PC Case Instruction Manual

1. Entwodiksyon

This manual provides essential instructions for the installation, operation, and maintenance of your Aigo Q1718 Mini-Tower PC Case. Designed for M-ATX and ITX motherboards, this compact case offers a robust housing for your computer components. Please read this manual thoroughly before beginning any installation to ensure proper assembly and functionality.

Figi 1: Devan view of the Aigo Q1718 Mini-Tower PC Case.

Figi 2: Angle view of the Aigo Q1718 Mini-Tower PC Case.

2. Enstalasyon ak Konpozan

Follow these steps to install your computer components into the Aigo Q1718 PC Case. Ensure the case is placed on a stable, flat surface before beginning.

2.1 Louvri ka a

Carefully remove the side panel(s) of the case to access the interior. Typically, this involves unscrewing thumbscrews at the rear and sliding the panel backward.

2.2 Enstalasyon mèr

The Aigo Q1718 supports M-ATX and ITX motherboards. Install the necessary standoffs onto the motherboard tray according to your motherboard's form factor. Carefully place your motherboard onto the standoffs and secure it with screws.

2.3 Enstalasyon ekipman pou pouvwa a

The case supports ATX power supplies. Install your ATX power supply into its designated bay, usually at the top or bottom rear of the case, and secure it with screws.

2.4 Enstalasyon Aparèy Depo

The case provides bays for 2 x SSDs and 1 x HDD. Mount your SSDs and HDDs into the appropriate drive bays and secure them. Connect the necessary power and data cables.

2.5 Enstalasyon Kat Ekspansyon

The case features 4 expansion slots. Install your graphics card (VGA) or other PCIe expansion cards into the motherboard's PCIe slots. Note the maximum VGA length supported is 155 mm.

2.6 CPU Cooler Installation

Install your CPU cooler onto the motherboard. Ensure it fits within the maximum supported CPU cooler height of 270 mm.

2.7 Fan Installation (Optional)

The Aigo Q1718 case does pa include fans. You can install additional cooling fans in the following positions:

• Front: 1 x 120 mm fan
• Side: 1 x 120 mm fan
• Rear: 1 x 80 mm fan

Figi 3: Enteryè view of the case, left side.

Figi 4: Enteryè view of the case, right side.

3. Itilizasyon bwat òdinatè a

Once all components are installed and cables are connected, you can close the case and power on your system.

3.1 Koneksyon Front Panel

The front panel of the Aigo Q1718 provides convenient access to:

• 2 pò USB 2.0: Pou konekte periferik tankou klavye, sourit, oswa kle USB.
• Audio/Mic Jacks: For connecting headphones, speakers, or microphones.
• Bouton pouvwa: To turn your computer on or off.
• Reset Button (if present): To restart your computer.

Ensure all front panel cables are correctly connected to your motherboard's headers during installation.

4. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan PC ou yo.

4.1 Netwayaj

• Eksteryè: Sèvi ak yon mou, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners.
• Enteryè: Periodically open the case and use compressed air to remove dust buildup from components and fan mounts. If dust filters are present, clean them regularly.

4.2 Swen Jeneral

Avoid placing the case in direct sunlight or near heat sources. Ensure adequate airflow around the case to prevent overheating.

NAN. Depanaj

Si ou rankontre pwoblèm, konsidere etap depanaj komen sa yo:

• Sistèm nan pa limen: Check all power connections, including the power supply to the wall outlet, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
• Components not detected: Ensure all components (motherboard, CPU, RAM, storage, graphics card) are properly seated and their respective power and data cables are securely connected.
• Surchof: Verify that all installed fans are spinning correctly and that there is no excessive dust buildup obstructing airflow. Ensure proper thermal paste application on the CPU cooler.

For more complex issues, consult the manuals for your individual components or seek professional assistance.

6. Espesifikasyon

7. Enfòmasyon sou Garanti

The Aigo Q1718 Mini-Tower PC Case comes with a Garanti manifakti 12 mwa from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or modifications.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.

8. Sipò

For technical assistance, warranty claims, or further inquiries regarding your Aigo Q1718 PC Case, please contact Aigo customer support through their official websit entènèt la oubyen magazen kote ou te achte pwodwi a.

When contacting support, please have your product model (Q1718-BK) and proof of purchase readily available.