Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN 8.7 Inch Motion Sensor LED Flush Mount Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
Ki sa ki nan bwat la
- Motion Sensor Ceiling Light (x4)
- Mounting Materyèl
- Manyèl Enstriksyon
Enfòmasyon sou Sekirite
AVÈTISMAN: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can cause electric shock or fire.
- Ensure the power supply is OFF before installation.
- Si ou pa abitye ak fil elektrik, se yon elektrisyen kalifye ki ta dwe fè enstalasyon an.
- Do not install on a dimmable circuit. This fixture is non-dimmable.
- Pwodwi sa a fèt pou itilize andedan kay la sèlman.
- Pa modifye aparèy la oswa konpozan li yo.
Enstalasyon ak Enstalasyon
The BLNAN Motion Sensor Ceiling Light is designed for easy hardwired installation on ceilings or walls.
Etap Pre-Enstalasyon
- Etenn pouvwa: Ensure the power to the installation area is completely off at the circuit breaker.
- Chwazi Tanperati Koulè: Before mounting, locate the toggle switch on the light fixture (labeled C, N, W). Select your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cold White). This setting cannot be changed after installation without dismounting the fixture.
Enstriksyon pou monte
- Atache Sipò Montaj la: Secure the plastic mounting bracket to your existing junction box. The bracket is compatible with junction boxes having screw holes 2.75 to 3.7 inches apart.
- Konekte fil elektrik: Use the included wire nuts to connect the fixture's wires to your household wiring (Black to Black, White to White, Ground to Ground). The fixture includes a hanging rope for temporary support during wiring.
- Aparèy sekirite: Align the light fixture with the plastic bracket and rotate it clockwise until it locks securely into place.
Videyo enstalasyon
Video 1: BLNAN Motion Sensor Ceiling Light Installation and Features. This video demonstrates the installation process and highlights key features of the BLNAN motion sensor ceiling light.
Enstriksyon Operasyon
Your BLNAN Motion Sensor Ceiling Light features adjustable operating modes and hold times.
Mòd fonksyònman
Locate the mode switch next to the motion sensor on the fixture. Slide the switch to select one of the three operating modes:
- AUTO Mode (Motion and Light Sensor): The light activates only when motion is detected in dark conditions. It will not turn on during daylight hours.
- ON Mode (Constant Light): The light remains continuously on, regardless of motion or ambient light conditions.
- G Mode (Only Motion Sensor): The light activates when motion is detected, functioning in both day and night conditions.
Anviwònman Tan Kenbe
The light features a switch to adjust how long the light stays on after motion is no longer detected. Select from 30 seconds, 120 seconds, or 180 seconds.
Deteksyon Capteur Mouvman
The built-in PIR infrared motion detector has a detection angle of up to 120° and a detection range of 10-20 feet (semidiameter). The recommended mounting height is 8-11.5 feet for optimal performance.
Antretyen
To ensure the longevity and optimal performance of your BLNAN Motion Sensor Ceiling Light, follow these simple maintenance guidelines:
- Netwayaj: Disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
- Enspeksyon: Periodically check for any loose wiring or damage to the fixture. If any issues are found, disconnect power and consult a qualified electrician.
- Ranplasman anpoul: This LED fixture does not require bulb replacement. The LEDs are integrated and designed for long-term use.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | No power supply. Incorrect wiring. Mode switch set to AUTO in bright conditions. | Check circuit breaker. Verify wiring connections. Switch to ON or G mode to test. |
| Capteur mouvman an pa detekte. | Obstriksyon nan chan mayetik detèktè a view. Incorrect mode setting. Sensor malfunction. | Ensure clear path to sensor. Set to AUTO or G mode. Contact support if issue persists. |
| Limyè a limen sanzatann. | Sensor detecting subtle movements (e.g., drafts, small pets). Sensor sensitivity. | Ensure fixture is installed in a stable location. Consider adjusting sensor placement if possible. |
| Light stays on too long/short. | Incorrect hold time setting. | Adjust the hold time switch to your desired duration (30s, 120s, 180s). |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | BLNAN |
| Non modèl | Ceiling Light (LS-CL-G18W-M-S) |
| Dimansyon pwodwi | 8.7"L x 8.7"L x 0.98"H |
| Tanperati Koulè | 3000K, 4000K, 5000K (Selectable) |
| Klète | 1800 Lumen |
| Wattage | 18 Watts |
| Voltage | 120 Volts |
| Sous pouvwa | Fil elektrik (branche) |
| Kalite enstalasyon | Enstale sou miray la oswa plafon an |
| Mouvman Capteur | PIR Infrared, 120° Detection Angle, 10-20 ft Range |
| Karakteristik espesyal | 3 Color Temperatures, Energy Efficient, Motion Sensor, Adjustable Timer |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| Materyèl | Plastik |
| Fini Kalite | Mat |
Enfòmasyon sou Garanti
BLNAN products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your purchase or contact BLNAN customer support. This warranty typically covers defects in materials and workmanship under normal use.
Sipò pou Kliyan
If you have any questions, require assistance with installation, or encounter any issues with your BLNAN Motion Sensor Ceiling Light, please contact our customer support team. Contact information can typically be found on the product packaging or the official BLNAN websit.