Manyèl Itilizatè Trotinèt Elektrik WEELMOTION E1 PRO a

1. Enfòmasyon enpòtan sou sekirite

Before operating the WEELMOTION E1 PRO Electric Scooter, please read this manual thoroughly and understand all safety warnings and instructions. Failure to follow these instructions may result in serious injury or property damage.

• Toujou mete yon kas ak ekipman sekirite apwopriye (pwoteksyon jenou, pwoteksyon koud) lè w ap monte bisiklèt.
• Adult supervision is required for children operating this scooter.
• Observe all local traffic laws and regulations. Do not ride on public roads with heavy traffic.
• The scooter is designed for riders weighing between 40 lbs (18 kg) and 175 lbs (79.4 kg).
• Do not ride in wet conditions, on uneven surfaces, or near stairs.
• Kenbe dwèt ou ak lòt pati nan kò ou lwen pati k ap deplase yo.
• Asire w ke scooter a byen chaje anvan chak itilizasyon.

Push Start Function Safety

For rider safety, the WEELMOTION E1 PRO features a 'Push Start' function. The acceleration throttle will only engage the motor once the scooter reaches a speed of approximately 3 km/h (1.8 mph). This prevents accidental acceleration from a standstill.

Sekirite batri

• Use only the charger provided by WEELMOTION.
• Pa eseye louvri oswa modifye pake batri a.
• Store the scooter and battery in a cool, dry place away from direct sunlight and extreme temperatures.
• Pa chaje batri a twòp. Debranche chajè a yon fwa chaj la fini.

2. Pake kontni

Tanpri verifye ke tout atik yo prezan nan pakè a:

• WEELMOTION E1 PRO Electric Scooter (main unit)
• Pouvwa adaptè/Charjeur
• Manyèl Itilizatè (dokiman sa a)
• Necessary tools for assembly (if applicable)

3. Asanblaj ak Enstalasyon Inisyal

Dewoulman Scooter la

The WEELMOTION E1 PRO is designed for easy folding and portability. To unfold:

1. Mete scooter a sou yon sifas plat epi ki stab.
2. Jwenn latch mekanis pliye a toupre baz tij gidon an.
3. Release the latch and carefully lift the handlebar stem until it locks into the upright position. Ensure it clicks securely into place.
4. Tighten any safety clamps or levers associated with the folding mechanism to prevent accidental folding during use.

The scooter features a durable aluminum frame and a convenient folding design for portability and storage. The image illustrates the scooter in its upright riding position and its compact folded state, along with its dimensions: 30 inches x 13 inches x 36 inches (unfolded) and 36 inches x 13 inches x 14 inches (folded).

Inisyal chaje

Before first use, fully charge the scooter's battery. This typically takes several hours. Refer to the digital display for battery level indication.

• Locate the charging port, usually near the battery compartment on the deck.
• Konekte adaptè kouran an nan pò chaje a, answit branche adaptè a nan yon priz miray estanda.
• The charging indicator on the charger or scooter will change (e.g., from red to green) when charging is complete.

4. Operasyon Enstriksyon

Limen / Off

Press and hold the power button on the digital display unit to turn the scooter on or off.

Riding with Push Start

The Push Start function ensures a safe and controlled acceleration. Follow these steps to begin riding:

1. Mete yon pye byen fèm sou platfòm scooter a.
2. Use your other foot to manually propel the scooter forward, similar to a traditional kick scooter.
3. Once the scooter reaches a speed of approximately 3 km/h (1.8 mph), gently press down on the right-hand thumb throttle. The motor will engage.
4. Once the motor is engaged and the scooter is coasting, place both feet onto the deck.

A child demonstrates the 'Push to Start' procedure for the WEELMOTION E1 PRO Electric Scooter. This safety feature requires the rider to manually propel the scooter to a minimum speed before the electric motor engages, ensuring a controlled start.

Itilizasyon akseleratè

The right-hand thumb throttle controls the speed. Press down gently to accelerate and release to slow down. The maximum speed is approximately 16 km/h (10 mph).

Sistèm frenaj

The WEELMOTION E1 PRO is equipped with dual braking systems for enhanced safety:

• Front Electronic Brake: Located on the left-hand thumb lever. Press gently to slow down, apply more pressure for a complete stop.
• Rear Fender Brake: A mechanical brake operated by pressing down on the rear fender with your foot. This provides additional stopping power and control.

The image highlights the dual braking system of the WEELMOTION E1 PRO Electric Scooter. It shows the rear foot brake, where the rider presses down on the fender, and the digital brake lever located on the handlebar, providing comprehensive stopping control.

Lights and Digital Display

The scooter features vibrant RGB paddle lights and bright front bar lights. The digital display provides essential riding information:

• Vitès: Montre vitès aktyèl la.
• Endikatè nivo batri: Montre kantite chaj batri ki rete a.
• Bouton pouvwa: For turning the scooter on/off.

Yon detaye view of the WEELMOTION E1 PRO Electric Scooter's handlebar and digital display. Labels point to the speedometer, battery life indicator, power button, brake lever, and throttle, providing a clear guide to the controls.

5. Antretyen ak Swen

Antretyen regilye asire lonjevite ak operasyon an sekirite nan scooter ou a.

Netwayaj

• Siye scooter a ak piblisiteamp twal apre chak itilizasyon. Evite itilize pwodwi chimik piman bouk oswa materyèl abrazif.
• Do not use high-pressure water jets or submerge the scooter in water.

Swen batri ak depo

• Charge the battery fully after each ride, even if only used for a short period.
• If storing the scooter for an extended period, charge the battery to approximately 50-70% every 30-60 days to maintain battery health.
• Store the scooter in a dry, temperature-controlled environment (ideally between 10°C and 25°C / 50°F and 77°F).

Tire and Brake Inspection

• Regularly inspect the 6.5-inch solid tires for wear or damage.
• Check the functionality of both the electronic and fender brakes before each ride. Ensure they respond effectively.

NAN. Depanaj

If you encounter issues with your WEELMOTION E1 PRO, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact WEELMOTION customer support.

7. Espesifikasyon

Key technical specifications for the WEELMOTION E1 PRO Electric Scooter:

8. Garanti ak sipò

WEELMOTION products are manufactured to high-quality standards. This product comes with a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims.

For warranty service, technical support, or replacement parts, please contact WEELMOTION customer service through the retailer where the product was purchased or visit the official WEELMOTION websit pou enfòmasyon kontak.

Please note that the warranty does not cover damage caused by misuse, neglect, accidents, unauthorized modifications, or normal wear and tear.