Anderic RR7222T434 Remote Control User Manual

Entwodiksyon

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anderic RR7222T434 Replacement Remote Control. This remote is designed to seamlessly replace specific Home Decorators Collection and Hampton Bay ceiling fan remotes, offering convenient control over fan speeds, light functions, and reverse mode.

Enfòmasyon sou konpatibilite

Critical Compatibility Note: This Anderic RR7222T434 Replacement Remote is specifically designed to replace original remotes with the FCCID: CHQ7222T434 or UC7222T434 printed on their back. It also replaces the TR171B Remote Control made for the MR77A receiver. This remote will PA function with original remotes that have FCCID: UC7222T (without "434") or CHQ7222T (without "434").

It is engineered for use with Home Decorators Collection and Hampton Bay Altura 68" Ceiling Fans that utilize MR77A & MR77A.2 receivers.

Kontni pake

• 1 x Anderic RR7222T434 Remote Control
• 1 x Mi Mount Support
• Note: An A23 12-Volt battery is required and is not included in the package.

Enstriksyon Enstalasyon

1. Enstalasyon batri

Locate the battery compartment on the back of the remote control. Insert one A23 12-Volt battery, ensuring correct polarity (+/-) as indicated inside the compartment. Close the battery cover securely.

2. DIP Switch Pairing

The Anderic RR7222T434 remote uses DIP switches for pairing with your ceiling fan receiver. The DIP switches are typically located inside the battery compartment of the remote and on the ceiling fan receiver unit itself. Both sets of DIP switches must match for the remote to function correctly.

1. Identify DIP Switches: Open the battery cover on your new Anderic remote. Locate the series of small switches (DIP switches).
2. Access Receiver DIP Switches: For your ceiling fan, you may need to access the receiver unit, which is usually located in the fan's canopy (the part that attaches to the ceiling). Consult your ceiling fan's original manual for instructions on accessing its receiver and DIP switches.
3. Anviwònman Match yo: Carefully match the position of the DIP switches on your new Anderic remote to the exact pattern of the DIP switches on your ceiling fan's receiver. Ensure each switch is set to the identical ON or OFF position.
4. Fonksyonalite tès: After matching the DIP switch settings, reassemble the fan canopy and close the remote's battery cover. Test the remote's functions to ensure proper operation.

If the remote does not operate the fan, double-check the DIP switch settings on both the remote and the receiver.

Enstriksyon Operasyon

The Anderic RR7222T434 remote control provides intuitive control over your ceiling fan and light. Refer to the image below for button identification.

Imaj: Devan view of the Anderic RR7222T434 remote control. It is black with light gray and beige buttons. From top to bottom, there are three oval buttons labeled '3', '2', and '1' for fan speeds. Below these are a power button (circle with vertical line) and a reverse button (circle with two arrows forming a loop). At the bottom, there is a large circular beige button with a light bulb icon for light control. The brand "ANDERIIC" and model "RR7222T434" are printed at the bottom.

• Bouton Vitès Vantilatè (1, 2, 3): Press '1' for low speed, '2' for medium speed, and '3' for high speed.
• Fan Off/Power Button (⏻): Press this button to turn the ceiling fan off.
• Bouton Fonksyon Envès (↻): Press this button to change the direction of the fan blades (e.g., for summer or winter operation).
• Light Control Button (💡): Press this button to toggle the fan's light on or off. If your fan supports dimming, holding this button may adjust the light intensity.

Antretyen

Ranplasman batri

When the remote's performance diminishes or it stops responding, it is likely time to replace the battery. Follow the battery installation steps outlined in the "Setup Instructions" section. Always use a fresh A23 12-Volt battery for optimal performance.

Netwayaj

To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the remote's surface or internal components.

Depanaj

Espesifikasyon

• Nimewo Modèl: RR7222T434
• Mak: Anderik
• Compatible FCCIDs: CHQ7222T434, UC7222T434
• Frekans: 433.9MHz (434MHz)
• Kondisyon pou batri: 1 x A23 12-Volt (not included)
• Dimansyon pake: 6.54 x 3.39 x 1.61 pous
• Pwa atik: 2.39 ons
• Manifakti: Dan's Electronics Etc., Inc.
• Koulè: Nwa
• Max Kantite Aparèy Sipòte: 1
• Aparèy konpatib: Fanatik

Garanti ak sipò

For warranty information or technical support, please contact Anderic customer service. Refer to the product packaging or the official Anderic websit la pou jwenn enfòmasyon kontak ak kondisyon garanti ki pi resan yo.

Ou ka vizite a Magazen Anderic sou Amazon pou plis enfòmasyon pwodwi.