Entwodiksyon
This manual provides essential instructions for the safe and effective use of your AOLIKES 3.7V 1400mAh Lithium Polymer replacement battery. This battery is designed to power specific Sena communication systems and cameras. Please read this manual thoroughly before installation and use.
Image: The AOLIKES 3.7V 1400mAh Lithium Polymer battery with connector.
Enfòmasyon sou Sekirite
Observe the following safety precautions to prevent damage to the battery or connected devices, and to ensure personal safety:
- Pa demonte, pike, oswa modifye batri a.
- Avoid exposing the battery to extreme temperatures (high or low), direct sunlight, or fire.
- Kenbe batri a lwen dlo oswa lòt likid.
- Sèvi ak sèlman chajè ak metòd chaje konpatib.
- Si batri a montre siy anfle, flit, oswa domaj, sispann itilize li imedyatman epi jete li byen.
- Kenbe soti nan atenn timoun yo.
- The battery features built-in protection against overcharging, overheating, and short circuits to ensure optimal operation and reduce potential hazards.
Konpatibilite
This AOLIKES 3.7V 1400mAh battery is designed for specific Sena devices. Please verify your device model before installation.
Aparèy konpatib:
- Sena Spider RT1 Bluetooth Communication System
- Sena 50R 3-Button Motorcycle Bluetooth Headset
- Sena SP130
- Sena SP128
- Sena SP53
- Sena Prism Tube WiFi Camera
Important Incompatibility Note:
This battery is NOT compatible with Sena 50R or Sena 50R-01 Motorcycle Bluetooth Headsets.
Image: Visual representation of battery compatibility, highlighting specific Sena models it fits and does not fit.
Kontni pake
Chak pake gen atik sa yo:
- AOLIKES 3.7V 1400mAh Lithium Polymer Battery (Quantity: 2)
Image: The product packaging displaying the model number 822262A and barcode X0020KM47N.
Enstalasyon ak Enstalasyon
The AOLIKES battery is designed for plug-and-play installation. However, replacing internal batteries in electronic devices may require specific tools and technical knowledge. If you are unsure, it is recommended to seek professional assistance to avoid damaging your device.
General Installation Steps (Consult your device's manual for specific instructions):
- Aparèy koupe pouvwa: Ensure your Sena device is completely powered off before beginning.
- Chèche lòj batri: Refer to your device's original manual to locate and open the battery compartment. This may involve removing screws or prying open casing.
- Dekonekte ansyen batri a: Carefully disconnect the old battery's connector from the device's circuit board. Note the orientation of the connector.
- Retire ansyen pil la: Gently remove the old battery. It may be secured with adhesive.
- Enstale nouvo batri: Place the new AOLIKES battery into the compartment. Ensure it fits correctly without bending or forcing.
- Konekte nouvo pil la: Connect the new battery's plug to the device's circuit board, ensuring the correct orientation.
- Konpatiman an sekirite: Fèmen epi an sekirite lòj batri a.
- Inisyal chaj: Perform an initial charge as described in the "Operating" section.
Image: The AOLIKES battery showing its connector, illustrating the component to be plugged into the device.
Opere
After successful installation, the battery is ready for use. For optimal performance and longevity, follow these guidelines:
- Inisyal chaj: Li rekòmande pou chaje batri a nèt anvan premye itilizasyon li.
- Chaje: Use the original charger provided with your Sena device or a compatible charger. The battery's nominal voltage is 3.7V, and it fully charges to 4.2V.
- Egzeyat: Avoid completely draining the battery frequently. Lithium Polymer batteries benefit from partial discharge and recharge cycles. The shutdown voltage se 2.85V.
- Tanperati: Operate the device with the battery within its recommended temperature range to ensure efficiency and safety.
Antretyen
Bon antretyen pwolonje lavi batri ou a:
- Depo: If storing the battery for an extended period, charge it to approximately 50-60% and store it in a cool, dry place. Avoid full discharge or full charge during long-term storage.
- Netwayaj: Keep the battery and its contacts clean and dry. Use a soft, dry cloth if cleaning is necessary.
- Enspeksyon: Periodically inspect the battery for any physical damage, swelling, or signs of leakage.
Depanaj
Si ou rankontre pwoblèm ak batri ou a, konsidere solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Batri pa chaje | Incorrect connection, faulty charger, or incompatible device. | Ensure the battery is correctly connected. Try a different compatible charger. Verify device compatibility. |
| Aparèy pa limen | Battery not installed correctly, battery fully discharged, or device issue. | Re-check battery connection. Charge the battery. Test with another known good battery if possible. |
| Kout lavi batri | Battery not fully charged, aging battery, or high power consumption by device. | Ensure full charge. If battery is old, consider replacement. Check device settings for power-saving options. |
Espesifikasyon
Technical details for the AOLIKES 3.7V 1400mAh Lithium Polymer Battery:
| Karakteristik | Detay |
|---|---|
| Kalite batri | Polymer Lithium Ion Rechargeable Battery |
| Kapasite batri | 1400mAh |
| Nominal Voltage | 3.7V |
| Fully Charged Voltage | 4.2V |
| Pouvwa | 5.18Wh |
| Fèmen Voltage | 2.85V |
| Nimewo Modèl | 822262A (also referred to as RT1 Battery Replacement) |
| Pwa batri | 22 gram |
Garanti ak sipò
Pwodwi sa a vini ak yon Garanti ranbousman 30 jou. For any issues or support inquiries, please contact your retailer or the manufacturer directly.
Enfòmasyon sou manifakti:
Manifakti: SHENZHEN XINLAN TECHNOLOGY CO., LTD
Adrès: No 401, 215 Hao ChenWuWei, GangTouCun, GuanHu SheQu, GuanLan JieDao, Longhua Qu, SHENZHEN, GUANGDONG, 518110, CN
Imèl: uk@rzfinter.com
Tel: +86-13560728197
Reprezantan Inyon Ewopeyen:
Firmname: E-CrossStu GmbH
Adrès: Mainzer Landstr.69, Frankfurt am Main, Hessen, 60329 Deutschland
Imèl: e-crossstu@web.de
Tel: +49 69332967674
Image: Product packaging showing manufacturer and EU representative contact details.