TAMIYA 95501

Tamiya 95501 Mini 4WD Special Planning Avante Jr. Black Special Instruction Manual

Modèl: 95501

Entwodiksyon

This instruction manual provides detailed guidance for the assembly, setup, operation, and maintenance of your Tamiya 95501 Mini 4WD Special Planning Avante Jr. Black Special model kit. The Avante Jr. Black Special is a high-performance 4WD racer featuring a shaft drive mechanism, designed for enthusiasts aged 10 and above. This model emphasizes a distinctive smoked body and black chassis, complemented by hot pink wheels for a striking appearance. Please read this manual thoroughly before beginning assembly to ensure correct construction and optimal performance.

Enfòmasyon sou Sekirite

Please observe the following safety precautions during assembly and operation:

  • Ti Pati: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
  • Sharp Tools: Assembly requires the use of sharp tools. Exercise caution to prevent injury. Adult supervision is recommended for users under 14 years of age.
  • Batri: Use only the specified battery type (AA batteries x 2). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity. Remove batteries when the model is not in use for extended periods.
  • Adhesives and Paint: If using adhesives or paint (not included), ensure adequate ventilation and follow the manufacturer's safety instructions.
  • Anviwònman Fonksyònman: Operate the Mini 4WD in appropriate environments, such as designated Mini 4WD tracks, to prevent damage or injury.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse asanblaj la:

  • Chassis (Type 2)
  • Body (Smoked)
  • Wheels (Large diameter, Hot Pink)
  • Slick Tires
  • Gears (Two types: 5:1 and 4.2:1)
  • Motè
  • Screws and other small hardware
  • Manyèl Enstriksyon (dokiman sa a)
  • Coloring Stickers (Clear type, silver and red lines)

Nòt: 2 AA batteries, adhesives, paint, and assembly tools are pa enkli epi yo dwe achte separeman.

Enstriksyon Asanble

The Tamiya 95501 Mini 4WD is a plastic model assembly kit. Follow the detailed diagrams and steps provided in the included paper instruction manual for precise assembly. The general steps are outlined below:

  1. Asanblaj chasi: Begin by assembling the Type 2 chassis, which is designed for lightweight and efficient gear operation.
  2. Gearbox Installation: Install the gears into the gearbox. You will choose between two gear ratios: 5:1 for balanced speed and torque, or 4.2:1 for higher top speed.
  3. Enstalasyon motè: Securely install the included motor into the chassis.
  4. Axle and Wheel Assembly: Attach the axles, large diameter hot pink wheels, and slick tires. Ensure the tires are firmly seated on the wheels.
  5. Body Preparation: Prepare the smoked body. Apply the specially designed clear type coloring stickers with silver and red lines to enhance the black special appearance.
  6. Body Mounting: Mount the completed body onto the chassis.
  7. Tèks final yo: Verify all screws are tightened, and moving parts operate smoothly.
Assembled Tamiya Avante Jr. Black Special Mini 4WD car with black body, pink wheels, and 'AVANTE 4 WHEEL DRIVE' spoiler.

Image: The fully assembled Tamiya Avante Jr. Black Special Mini 4WD model, showcasing its distinctive black body, hot pink wheels, and rear spoiler.

Enstalasyon

Before operating your Mini 4WD, perform the following setup steps:

  • Enstalasyon batri: Open the battery compartment on the chassis and insert two AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
  • Gear Ratio Selection: During assembly, you selected either the 5:1 or 4.2:1 gear ratio. The 5:1 ratio provides a good balance for general racing, while the 4.2:1 ratio is optimized for higher speeds on less technical tracks.
  • Wheel and Tire Check: Ensure all wheels spin freely and the slick tires are securely attached.

Enstriksyon Operasyon

The Tamiya Mini 4WD is designed for racing on specialized Mini 4WD tracks. It is not a remote-controlled vehicle.

  1. Pouvwa sou: Locate the power switch on the chassis and slide it to the "ON" position. The motor will start, and the wheels will begin to spin.
  2. Plasman sou ray la: Carefully place the Mini 4WD onto a Mini 4WD track. The guide rollers will help keep the car on the track.
  3. Obsèvasyon: Observe your Mini 4WD as it races. Note its speed and stability.
  4. Pouvwa Off: When finished, slide the power switch to the "OFF" position.

For optimal performance, ensure the track is clean and free of obstructions.

Antretyen

Regular maintenance will help prolong the life and performance of your Mini 4WD:

  • Netwayaj: After each use, gently wipe down the chassis and body with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
  • Enspeksyon Kovèti pou: Periodically inspect the gears for wear or damage. Replace worn gears to maintain smooth operation.
  • Verifikasyon Motè: Ensure the motor is free of debris and spinning efficiently. If performance degrades, consider replacing the motor.
  • Kondisyon kawotchou: Check the slick tires for wear or damage. Worn tires can affect grip and speed.
  • Lòj batri: Keep the battery compartment clean and dry. Remove batteries if storing the model for an extended period.
  • Sere vis la: Occasionally check that all screws are tight, especially after high-speed runs.

Depanaj

PwoblèmKòz posibSolisyon
Car does not move or moves slowly.
  • Pil yo mouri oswa yo mal enstale.
  • Bouton pouvwa a koupe.
  • Gears are jammed or damaged.
  • Motè a defo.
  • Replace batteries with fresh ones; check polarity.
  • Asire w ke switch pouvwa a nan pozisyon "ON".
  • Inspect gears for debris or damage; clean or replace as needed.
  • Ranplase motè a.
Car veers off track frequently.
  • Guide rollers are damaged or not installed correctly.
  • Wheels or tires are loose or damaged.
  • Chassis is bent or damaged.
  • Check and adjust guide rollers; replace if damaged.
  • Ensure wheels and tires are securely attached and undamaged.
  • Inspect chassis for damage; replace if necessary.
Twòp bri pandan operasyon an.
  • Gears are not meshing correctly or are damaged.
  • Motor is loose or faulty.
  • Inspect and adjust gears; replace if damaged.
  • Ensure motor is securely installed.

Espesifikasyon

  • Non modèl: Avante Jr. Black Special
  • Nimewo Modèl: 95501-000
  • Mak: TAMIYA
  • Kalite: Mini 4WD Plastic Model Assembly Kit
  • Kalite chasi: Kalite 2
  • Sistèm kondwi: Arbr Drive 4WD
  • Included Motor: Wi
  • Rapò angrenaj: 5:1 and 4.2:1 (selectable)
  • Kawotchou: Slick Tires
  • Wou: Large Diameter, Hot Pink
  • Koulè kò: Smoked (Black Special)
  • Batri obligatwa: 2 x AA (pa enkli)
  • Laj rekòmande: 10 ane ak plis
  • Completed Dimensions (Approximate):
    • Longè: 130 mm (5.1 pous)
    • Lajè: 86 mm (3.4 pous)
    • Wotè: 48 mm (1.9 pous)
  • Materyèl: Plastik

Garanti ak sipò

Tamiya products are manufactured to high standards. For any questions regarding assembly, missing parts, or product performance, please refer to the contact information provided on the product packaging or visit the official Tamiya website for customer support. Specific warranty details may vary by region; please consult your retailer or Tamiya's official resources for more information.

Official Tamiya Websit: www.tamiya.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.