TOWILD TL03 Bicycle Tail Light Instruction Manual

Pwodwi souview

The TOWILD TL03 is a smart bicycle tail light designed to enhance cycling safety. It features intelligent brake detection, automatic light sensing, and multiple lighting modes, all powered by a rechargeable USB-C battery with an IPX6 waterproof rating.

Karakteristik kle

• Brake Warning Function (ON/OFF): Manually enable or disable the brake light feature. When activated, the light illuminates at maximum brightness during braking to alert traffic behind you. To toggle, long-press the switch for 3 seconds when the power is on. The light will flash 3 times to indicate the change.
• Light Sensor & Vibration Detection: Equipped with a smart chip, the light automatically turns on in dark environments (e.g., tunnels) and turns off in bright conditions during the day. The vibration sensor automatically turns the light on when movement is detected and off after 120 seconds of no vibration, conserving battery.
• 5 mòd ekleraj: Choose from Strobe, Rapid Flash, Breathing Flash, Flash, and Constant modes to suit various riding conditions.
• IPX6 ki enpèmeyab: Designed with high-density ABS material, ensuring reliable performance in rain and harsh weather conditions.
• USB-C Rechargeable: Features a 300mAh built-in battery with USB-C charging, eliminating the need for frequent battery replacement. Fully charges in approximately 2 hours.
• Endikatè nivo batri: Four red indicator lights show the battery status (0-25%, 25-50%, 50-75%, 75-100%) when the device is powered on.
• Enstalasyon fasil: Tool-free installation with included rubber bands, allowing mounting on seat rails or seat posts.

Enstalasyon ak Enstalasyon

The TOWILD TL03 tail light offers two primary installation methods: on the saddle rail or on the seat post. Both methods are tool-free and utilize the provided rubber bands.

Mounting on Saddle Rail

1. Attach the light's bracket to the saddle rail using the provided tie-wrap band.
2. Rotate the main body of the light clockwise by 90 degrees to secure it to the bracket.
3. Enstalasyon konplè.

Mounting on Seat Post

1. Combine the light's bracket with the seat post fixing rubber band.
2. Secure the bracket to the seat post using the rubber band.
3. Rotate the main body of the light clockwise by 90 degrees to secure it to the bracket.
4. Enstalasyon konplè.

Operasyon

• Pouvwa ON/OFF: Long-press the switch for 0.5 seconds to turn the light on or off.
• Chanje mòd ekleraj: With the power on, single-click the switch to cycle through the five lighting modes.
• Toggle Smart Mode / Manual Mode: With the power on, double-click the switch to switch between Smart Mode and Manual Mode.
• Brake Function ON/OFF: With the power on, long-press the switch for 3 seconds. The light will flash 3 times, and the brake function will turn off. To turn it back on, long-press the switch for 3 seconds again; the light will flash 3 times, and the brake function will resume.

Automatic Light Sensing

The integrated high-sensitivity light sensor automatically detects ambient light conditions. In Smart Mode, the light will turn off when it's bright (daytime) and automatically turn on when it's dark (nighttime or entering a tunnel).

Vibration Detection (Auto ON/OFF)

The smart chip includes a vibration sensor. When in Smart Mode, the light will automatically turn on when it detects movement. If no vibration is detected for 120 seconds, the light will automatically turn off to save battery. It will reactivate upon sensing vibration again.

Chaje ak batri

The TOWILD TL03 is equipped with a 300mAh internal battery and supports USB-C fast charging. A full charge takes approximately 2 hours.

Endikatè nivo batri

When the device is powered on, four red indicator lamps display the current battery level:

• Youn lamp: 0-25% batri
• De lamps: 25-50% batri
• Twa lamps: 50-75% batri
• Kat lamps: 75-100% batri

Lighting Modes and Runtimes

The TL03 offers five distinct lighting modes, each with varying runtimes. Please note that the listed runtimes are test values with the brake function OFF. Actual runtimes may vary depending on the frequency of brake activation when the brake function is ON.

Nòt: The above runtimes are tested with the brake function OFF. When the brake function is ON, the runtime will vary depending on the frequency of braking. Higher braking frequency will result in shorter runtimes.

Rezistans dlo

The TOWILD TL03 tail light boasts an IPX6 waterproof rating. This means it is protected against high-pressure water jets from any direction, making it suitable for use in rainy weather and on bumpy roads without concerns about water damage or malfunction.

Kontni pake

Upon opening your TOWILD TL03 package, you should find the following items:

• 1 x TL03 Tail Light
• 1 x Light Bracket
• 1 x USB-C chaje kab
• 3 x Tie-wrap Bands
• 1 x Anti-slip Pad (for seat post)
• 2 x Rubber Bands
• 1 x manyèl enstriksyon

Dimansyon pwodwi

The TOWILD TL03 tail light has compact dimensions, making it suitable for various bicycle types.

• Longè: 37 mm
• Lajè: 37 mm
• Wotè: 23 mm
• Pwa: 20 gram

Espesifikasyon

Depanaj

If you encounter any issues with your TOWILD TL03 tail light, please refer to the following common troubleshooting tips:

• Limyè pa limen: Ensure the battery is charged. Connect the light to a USB-C power source and check the battery indicator. Long-press the power button for 0.5 seconds to turn it on.
• Light not responding to movement (Smart Mode): Double-check that the light is in Smart Mode. If it is, ensure there is sufficient vibration to trigger the sensor.
• Limyè fren an pa aktive: Verify that the brake warning function is enabled (long-press for 3 seconds to toggle). Ensure the light is securely mounted and can detect deceleration.
• Kout lavi batri: Runtimes vary by mode. Ensure you are using a mode appropriate for your desired duration. Frequent brake activations in modes with the brake function enabled will reduce overall runtime.

If these steps do not resolve your issue, please contact TOWILD customer support for further assistance.

Garanti ak sipò

The TOWILD TL03 Bicycle Tail Light comes with a Garanti manifakti 2 zan. If you experience any product defects or issues within this period, please contact TOWILD customer support. They will be able to provide assistance and guidance regarding warranty claims or product inquiries.

For support, please refer to the contact information provided in your product packaging or visit the official TOWILD websit.