BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

Entwodiksyon

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: RISK POU CHÒK ELEKTRIK.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• Asire w tout koneksyon fil yo byen fèm epi byen izole.
• Do not exceed the maximum electrical ratings of the device.
• Opere Voltage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

Enstalasyon & Enstalasyon

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

Kontni pake:

• BN-LINK Countdown Timer Switch
• Plak mi
• Montaj Vis
• Fil nwa

Zouti obligatwa (pa enkli):

• Tournevis (Phillips ak Flathead)
• Fil retire rad sou ou
• Tep elektrik
• Voltage tèsteur

Etap enstalasyon:

1. Etenn pouvwa: Jwenn disjonktè ki kontwole switch w ap ranplase a epi etenn li. Verifye si kouran an koupe avèk yon vòltaj.tage tèsteur.
2. Retire ansyen switch la: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Idantifye fil yo: Identify the following wires in your wall box:
   • Fil cho (liy): Tipikman nwa, li pote kouran nan disjonktè a.
   • Fil chaj: Typically black, sends power to the light/fan.
   • Fil net: Typically white. A neutral wire is REQUIRED for this switch.
   • Fil tè: Tipikman kwiv vèt oswa toutouni.
4. Konekte nouvo switch la an fil: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • Konekte a Fil Nwa from the timer switch to the Hot Wire (Line) soti nan bwat miray la.
   • Konekte a Fil wouj from the timer switch to the Chaj Fil soti nan bwat miray la.
   • Konekte a Blan Fil from the timer switch to the Fil net soti nan bwat miray la.
   • Konekte a Fil vèt from the timer switch to the Fil tè soti nan bwat miray la.
5. Fikse switch la: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. Enstale Plak Mi: Attach the provided wall plate over the switch.
7. Retabli pouvwa: Remete kouran an nan disjonktè a.
8. Operasyon tès: Test the timer switch to ensure it functions correctly.

Imaj: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

Enstriksyon Operasyon

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

Imaj: Devan view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

Fonksyon bouton:

• Bouton pouvwa (anlè): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

ExampItilizasyon:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

Aplikasyon versatile

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

Imaj: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• Twalèt: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• Garaj: Manage lighting or ventilation systems.
• Laundry Rooms: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

Antretyen

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• Netwayaj: To clean the surface of the switch, gently wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
• Enspeksyon: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Pa gen okenn pati itilizatè yo ka fè sèvis: Pa gen pyès ki ka sèvi ak men itilizatè a anndan switch la. Pa eseye louvri oswa repare aparèy la tèt ou.

Depanaj

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

Espesifikasyon

Imaj: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

Garanti ak sipò

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

Enfòmasyon pou kontakte:

• Refer to the BN-LINK official websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.
• Online support may be available through the BN-LINK brand store on Amazon or their official websit.