Manyèl Itilizatè Machin Bwason Glase Adcraft SGM-1 Granita

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Adcraft SGM-1 Granita Frozen Beverage Machine. Please read all instructions carefully before initial use to ensure proper function and longevity of the unit.

The Adcraft SGM-1 is a single-hopper, 3-gallon capacity machine designed for preparing and dispensing a variety of frozen and cold beverages, including granitas, slushies, and frozen cocktails. It features a durable stainless steel and high-impact plastic frame, a clear polycarbonate hopper, LED lighting, a non-drip tap, and a digital thermostat for precise temperature control.

2. Enstriksyon Sekirite

Toujou swiv prekosyon sekirite debaz yo lè w ap itilize aparèy elektrik pou diminye risk dife, chòk elektrik, oswa blesi.

• Li tout enstriksyon yo anvan ou itilize machin nan.
• Ensure the electrical supply matches the requirements specified on the machine's rating label (115V/60Hz).
• Connect the machine only to a properly grounded NEMA 5-15 outlet. Do not use extension cords or adapters.
• Pa plonje machin nan, kòd, oswa ploge nan dlo oswa lòt likid.
• Unplug the machine from the outlet before cleaning, servicing, or when not in use.
• Keep hands and utensils out of the hopper during operation to prevent injury.
• Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or has been damaged in any manner.
• Place the machine on a stable, level surface with adequate ventilation around the unit. The non-slip feet provide stability.
• Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te bay sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo. .

3. Debalaj ak Enstalasyon

3.1 Debake

1. Retire machin nan nan anbalaj li avèk prekosyon.
2. Inspect the unit for any shipping damage. If damage is found, contact your supplier immediately.
3. Retire tout materyèl anbalaj yo, tankou nenpòt fim pwoteksyon oswa tep.

3.2 Plasman

• Place the machine on a sturdy, level countertop or table.
• Ensure there is sufficient space around the unit (at least 6 inches) for proper air circulation, especially around the ventilation grilles.
• Evite mete machin nan toupre sous chalè oswa anba limyè solèy dirèk.

3.3 Netwayaj Premye

Before first use, thoroughly clean all parts that will come into contact with beverages.

1. Remove the hopper lid, hopper, agitator, and tap assembly.
2. Wash these components with warm, soapy water. Rinse thoroughly and dry completely.
3. Siye eksteryè machin nan ak anonsamp twal.
4. Reassemble all parts, ensuring they are correctly seated.

3.4 Koneksyon pouvwa

Plug the 6-foot power cord into a dedicated 115V/60Hz NEMA 5-15 grounded electrical outlet.

4. Operasyon

4.1 Ranpli Hopper la

1. Ensure the machine is clean and properly assembled.
2. Prepare your desired beverage mixture according to recipe instructions. Do not exceed the 3-gallon capacity of the hopper.
3. Pour the mixture into the clear polycarbonate hopper.
4. Securely place the hopper lid back on the unit.

4.2 Powering On and Settings

The machine features separate on/off switches for power and the agitator(s), along with a digital control panel.

Image: Control panel of the Adcraft SGM-1 Granita Frozen Beverage Machine, showing the power button, digital display, and various function buttons for settings.

1. Peze switch prensipal la pou limen machin nan.
2. Press the agitator switch to activate the continuous agitator system, which keeps the product mixed and fresh.
3. Use the digital thermostat controls to select your desired setting:
   • Cold Drink Setting: For dispensing chilled, non-frozen beverages.
   • Slushy Setting: For freezing beverages to a slush consistency.
4. The LED lighting built into the top panel will illuminate the product inside the hopper, enhancing visibility.

4.3 Nighttime Running Feature

To conserve energy during off-peak hours, utilize the nighttime running feature. Consult the digital control panel instructions for specific programming steps to activate this mode.

4.4 Dispense

To dispense a beverage, pull the non-drip tap mechanism forward. Release the tap to stop the flow. The non-drip design helps prevent leakage.

Image: The Adcraft SGM-1 Granita Frozen Beverage Machine, showcasing its single 3-gallon clear hopper, black base, and front-mounted dispensing tap.

5. Netwayaj ak antretyen

Regular cleaning and maintenance are crucial for hygiene, optimal performance, and extending the lifespan of your machine.

5.1 Netwayaj chak jou

1. Deploge machin nan soti nan priz kouran an.
2. Empty any remaining beverage from the hopper.
3. Remove the hopper lid, hopper, agitator, and tap assembly.
4. Wash all removable parts with warm, soapy water using a soft brush or sponge. Rinse thoroughly with clean water.
5. Clean the stainless steel cooling cylinder inside the machine with a damp twal.
6. Siye eksteryè machin nan ak anonsamp twal. Pa sèvi ak pwodui netwayaj abrazif oswa kousinen.
7. The removable drip tray with float indicator should be emptied and cleaned daily.
8. Pèmèt tout pati yo sèk nèt anvan yo remonte.

5.2 Antretyen regilye

• Tanzantan tcheke fil elektrik la pou nenpòt siy domaj.
• Ensure ventilation grilles are free from dust and debris to maintain proper airflow.
• Inspect seals and gaskets for wear and tear. Replace if necessary to prevent leaks.

NAN. Depanaj

Anvan ou kontakte sèvis la, re-view pwoblèm komen ak solisyon sa yo:

If the problem persists after attempting these solutions, please contact Adcraft customer support.

7. Espesifikasyon

8. Garanti ak sipò

8.1 Enfòmasyon sou Garanti

This Adcraft SGM-1 Granita Frozen Beverage Machine is covered by the Adcraft One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use and service for a period of one year from the date of purchase. Please retain your proof of purchase for warranty claims.

For full details regarding warranty terms, conditions, and exclusions, please refer to the official warranty documentation provided with your product or contact Adcraft customer service.

8.2 Sipò pou Kliyan

For technical assistance, parts, or warranty inquiries, please contact Adcraft customer support. Contact information can typically be found on the manufacturer's websit la oubyen sou anbalaj pwodwi a.