1. Entwodiksyon
This manual provides detailed instructions for the safe and efficient operation of your ATOMSTACK A12 Pro Laser Engraving Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
Avètisman sekirite:
- Always wear UV-filtering eye protection when operating the laser engraver.
- Ensure proper ventilation to dissipate fumes and smoke generated during engraving/cutting.
- Pa kite machin nan poukont li pandan operasyon an.
- Kenbe materyèl ki ka pran dife lwen zòn travay la.
- Familiarize yourself with the emergency stop button location.
2. Pake kontni
Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:
Figure 2.1: ATOMSTACK A12 Pro Laser Engraving Machine and included accessories.
- ATOMSTACK A12 Pro Laser Engraving Machine (Unibody Frame)
- Tèt lazè
- Adaptè pouvwa (24V, 5A)
- Pouvwa kab
- USB kab (Tip-C)
- Goggles (UV-filtering eye protection)
- Fixed Focus Lens
- Manyèl itilizatè
- Tools (H3 hexagon L-shaped wrench, M4 thumb screws)
- Flash Drive
- Antèn WiFi
- Silicone Hose (air hose)
- Wire Anchor
- Kab Clamp
- 100*30 lint free cloth
- Kurseur
- Chanje kle
3. Gid Enstalasyon
The ATOMSTACK A12 Pro features an unibody design for minimal assembly. Follow these steps to get started:
- Unboxing: Carefully remove the machine and all accessories from the packaging. The machine is pre-calibrated and shipped as a single unit.
Figure 3.1: The ATOMSTACK A12 Pro is ready to use right out of the box with its unibody design.
- Install the Slider: Attach the slider component to the designated rail on the machine. Secure it with the provided screws.
- Install the Laser Head: Mount the laser head onto the slider. Ensure it is firmly attached.
- Install the WiFi Antenna: Screw the WiFi antenna into its port on the machine's side.
- Install Tubing and X-axis Link Lines: Connect the tubing and X-axis link lines as shown in the diagram to ensure proper cable management and operation.
- Konekte pouvwa ak USB: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the machine to your computer.
- Pouvwa sou: Insert the switch key and turn it to the ON position. The machine is now ready for software setup.
Video 3.1: A detailed guide on how to install and set up the ATOMSTACK laser engraver.
4. Operasyon Enstriksyon
4.1 Kontwòl lojisyèl
The ATOMSTACK A12 Pro supports multiple control methods:
- ATOMSTACK PC Software: Exclusive software for simplified operation, ideal for beginners.
- LightBurn & LaserGRBL: Traditional PC software for advanced users.
- ATOMSTACK Mobile APP: Available on Android and Apple App Stores for WiFi control via smartphone.
Figi 4.1: Plis paseview of the various software and app control options for the laser engraver.
4.2 Pwosesis Gravure
- Plasman materyèl: Place your material flat on the engraving bed.
- Ajisteman konsantre: Use the fixed-focus design for rapid and precise focusing in approximately 10 seconds.
- Cross Positioning: Utilize the newly added cross laser positioning feature for clear visibility of the laser's location, ensuring perfect alignment for engraving and easy horizontal adjustment.
- Anviwònman lojisyèl: Adjust engraving parameters (speed, power, passes) in your chosen software based on the material.
- Kòmanse grave: Lanse pwosesis gravur a nan lojisyèl la.
Figure 4.2: The cross positioning system helps align objects and lock to edges for precise horizontal carving.
5. Features & Capabilities
- Konsepsyon Unibody: Sturdy all-aluminum unibody design, installation-free and pre-calibrated.
- High Speed & Precision: New dual-axis linear guide rail structure and high-speed motherboard allow engraving speeds up to 600mm/s, 3-6 times faster than traditional frame machines. Accuracy within 0.004 inches.
- Lazè pwisan: 12000mW diode laser (Laser Class 4) with 50W machine power and a 0.05*0.06mm ultra-fine laser spot focus.
- Thicker Cuts: Can cut through 8mm wood, 5mm black acrylic, and 0.02mm stainless steel in a single pass.
- Diverse Material Compatibility: Engraves and cuts a wide range of materials including wood, acrylic, metal, glass, ceramics, leather, paper, cardboard, and more.
- Automatic Power Failure Recovery: Memorizes engraving position and swiftly resumes from the paused point, ensuring uninterrupted production and material saving.
- Sekirite amelyore: Equipped with 4-way limit switches, UV-filtering eye protection, a tilt detector with a 15-degree alarm, and an emergency stop button.
Figure 5.1: Comparison showing the significantly faster engraving speed of the A12 Pro.
Figure 5.2: Demonstrates the maximum cutting thickness for various materials with the A12 Pro.
Figi 5.3: Egzamples of various materials that can be engraved or cut by the machine.
6. Antretyen
- Netwayaj lantiy: Regularly clean the laser lens with the provided lint-free cloth to maintain optimal performance and prevent residue buildup.
- Lubrifikasyon ray: Periodically apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser head.
- Retire debri: Keep the engraving bed and surrounding area free of debris and dust. Use an air compressor or brush to clear away small particles.
- Mizajou mikrolojisyèl: Check the official ATOMSTACK website periodically for firmware updates to ensure your machine has the latest features and bug fixes.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Machin pa alimante | Power cable loose; Emergency stop engaged; Key not turned. | Check power connections; Disengage emergency stop; Turn key to ON. |
| Laser not firing/weak output | Lens dirty; Incorrect focus; Low power setting in software. | Clean laser lens; Adjust focus; Increase power setting. |
| Engraving is distorted/inaccurate | Loose belts/rails; Material shifting; Incorrect software settings. | Check and tighten belts/rails; Secure material; Verify software settings. |
| Lojisyèl la pa konekte ak machin nan | USB cable issue; Driver not installed; Incorrect COM port. | Try different USB port/cable; Install drivers; Select correct COM port in software. |
8. Espesifikasyon
- Dimansyon pwodwi: 23.22 x 23.22 x 7.08 pous
- Pwa atik: 18.74 liv
- Pouvwa Sòti Lazè: 12000mW (12W)
- Pouvwa machin: 50W
- Gwosè tach lazè: 0.05 * 0.06mm
- Vitès engraving: Jiska 600mm/s
- Presizyon: Within 0.004 inches
- Koneksyon: USB, WiFi (via Mobile APP)
- Sipòte lojisyèl: ATOMSTACK PC Software, LightBurn, LaserGRBL
- Manifakti: Shenzhen AtomStack teknoloji co, Ltd.
- Peyi orijin: Lachin
9. Garanti ak sipò
Your ATOMSTACK A12 Pro Laser Engraving Machine comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official ATOMSTACK websit.
Our professional technical and support teams are available 24/7 to answer any questions or concerns you may have.
