XCell 149276

XCell H280 Headlamp Manyèl Enstriksyon

Modèl: 149276

Entwodiksyon

The XCell H280 Headlamp is designed for versatile illumination, offering reliable brightness for various activities. This manual provides essential information for the safe and efficient use of your headlamp, ki kouvri konfigirasyon, operasyon, antretyen ak depanaj.

Karakteristik kle yo enkli:

  • Ekleraj versatile: Four light modes, including white LED, white spotlight, red spotlight, and red flashing light for individual use.
  • Pwisan Ekleraj: Up to 280 lumens and a light range of 120 meters provide strong brightness and reach.
  • Flexible Tilt Angle: L laamp head is adjustable up to 90° to ensure optimal illumination in any situation.
  • Compact and Comfortable: Lightweight design with an elastic and adjustable headband ensures high wearing comfort.
  • Fonksyon pratik: Includes time and memory function, quick shut-off, and IPX4 splash-water protection.

Enstalasyon

1. Enstalasyon batri

The XCell H280 Headlamp requires three (3) AAA batteries for operation. Ensure correct polarity when inserting batteries.

  1. Jwenn konpatiman batri a nan dèyè tèt la.amp inite.
  2. Louvri kouvèti lòj batri a.
  3. Insert three AAA batteries, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
  4. Fèmen kouvèti konpatiman batri a byen fèm pou asire rezistans dlo a.
XCell H280 Headlamp with adjustable strap and battery compartment

Image: XCell H280 Headlamp showing the main unit and adjustable strap. The battery compartment is located at the back of the main unit.

2. Ajiste bann tèt la

The elastic headband is adjustable to provide a comfortable and secure fit for various head sizes.

  • Mete tèt laamp sou tèt ou.
  • Use the adjustable buckles on the side of the headband to tighten or loosen it until it fits snugly without being too tight.
  • Asire headl laamp unit is centered on your forehead.

Enstriksyon Operasyon

1. Power On/Off

  • Pou vire tèt laamp ON, press the power button located on the top of the unit.
  • Pou vire tèt laamp OFF, press and hold the power button for approximately 2 seconds. The quick shut-off function allows turning off from any mode by holding the button.

2. Changing Light Modes

The XCell H280 features four distinct light modes. Press the power button repeatedly to cycle through the modes:

  1. High (White LED): Maximum brightness (280 lumens) for extensive illumination.
  2. Medium (White LED): Reduced brightness (200 lumens) for general use and battery conservation.
  3. Low (White LED): Minimal brightness (80 lumens) for close-range tasks or extended battery life.
  4. Wouj kontinyèl: Red light for preserving night vision.
  5. Flache wouj: Red flashing light for signaling or emergency situations.

Headl laamp includes a memory function, which means it will turn on in the last used mode.

3. Adjusting Tilt Angle

L laamp head can be tilted up to 90 degrees to direct the light precisely where needed.

  • Gently hold the headlamp unit and tilt it up or down to your desired angle.
  • The mechanism is designed to hold the chosen angle securely.

Antretyen

1. Netwayaj

  • Siye tèt laamp body with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
  • Clean the lens gently with a microfiber cloth to avoid scratches.
  • The headband can be hand-washed with mild soap and water, then air-dried.

2. Ranplasman batri

  • Replace all three AAA batteries simultaneously when the light output becomes dim or inconsistent.
  • Always use new, high-quality alkaline AAA batteries for optimal performance.
  • Jete pil yo itilize dapre règleman lokal yo.

3. Depo

  • If storing the headlamp for an extended period (more than one month), remove the batteries to prevent leakage and damage.
  • Sere tèt laamp nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.

Depanaj

PwoblèmKòz posibSolisyon
Headlamp pa limen.Pil ki mouri oswa ki mal mete.Ranplase pil yo ak nouvo, asire polarite ki kòrèk la (+/-).
Limyè a fèb oswa li ap tranble.Ba pouvwa batri.Ranplase pil ak pil nouvo.
Headlamp etenn sanzatann.Low battery power or loose battery connection.Replace batteries. Check that batteries are securely seated in the compartment.
Water ingress (despite IPX4 rating).Battery compartment not sealed properly or exposure to heavy water jets.Ensure battery compartment cover is fully closed. IPX4 protects against splashes, not submersion or strong jets. Dry the unit thoroughly if exposed to water.

Espesifikasyon teknik

KarakteristikDetay
Modèl149276
Dimansyon (L x W x H)58 x 43 x 35 mm
Pwa60 gram
Materyèl LojmanKawotchou/Plastik
Kalite sous limyèdirije
Pwodiksyon Limyè (Segondè)280 lumèn
Light Output (Medium)200 lumèn
Pwodiksyon Limyè (Ba)80 lumèn
Dire ekleraj3 hours (at max output)
Limyè Range120 mèt
Mòd limyèHigh, Medium, Low, Continuous Red, Flashing Red
Rezistans dloIPX4 (Splash-water resistant)
Pwovizyon pou pouvwa3 x AAA pil
Konpozisyon batriAlkalin

Enfòmasyon sou Garanti

XCell products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official XCell websit la pou plis detay sou tèm ak kondisyon garanti a. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò pou Kliyan

If you encounter any issues or have questions regarding your XCell H280 Headlamp that are not addressed in this manual, please contact XCell customer support. You can typically find contact information on the product packaging or the official XCell websit.

When contacting support, please have your product model number (149276) and a description of the issue ready.

© 2024 XCell. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.