XTUGA SF-1
XTUGA SF-1 Wireless XLR Transmitter and Receiver User Manual
Model: SF-1 | Brand: XTUGA
1. Entwodiksyon
The XTUGA SF-1 is a versatile wireless XLR transmitter and receiver system designed to convert any wired XLR microphone into a wireless setup. It operates on the UHF band, offering enhanced interference resistance and stable signal transmission. This system supports both dynamic and condenser microphones with built-in 0V/5V/48V phantom power modes, making it suitable for a wide range of audio applications including live performances, recording, and PA systems.

Image: XTUGA SF-1 Wireless XLR Transmitter and Receiver units.
2. Pwodwi Features
- Wireless XLR Compatibility: Supports all XLR microphones, including dynamic and condenser types, with selectable 0V/5V/48V phantom power modes.
- Odyo ki gen latans ki ba: Features 24-bit audio resolution and 48K sampling frequency for impeccable audio performance with less than 2ms latency.
- UHF Band Superiority: Utilizes the UHF band for enhanced interference resistance from electronic devices like phones, TVs, and Wi-Fi.
- Chanèl miltip: Offers 16 selectable channels to ensure interference-free operation, even in crowded environments.
- Ranje pwolonje: Provides a wireless range of up to 164 feet (50 meters) for flexible stage itilize.
- Long lavi batri: Built-in rechargeable lithium batteries offer 5-8 hours of continuous usage.
- Adjustable Volume/Gain: Features a VOL button to switch between 5 adjustable gain levels for optimal sound quality.

Image: Diagram illustrating the low latency (less than 2ms) of the wireless XLR system.

Image: Visual representation of the 50-meter transmission distance and UHF wireless technology.

Image: Illustration highlighting the 6-hour working time and Type-C charging port.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- 1 x XTUGA SF-1 Transmitter
- 1 x XTUGA SF-1 Receiver
- 2 x USB Chaje Câbles
- 1 x manyèl enstriksyon
- 1 x XLR (male) to mono 6.35mm (male) audio adapter
- 1 x XLR (female) to mono 6.35mm (male) audio adapter

Image: A visual list of all included product accessories.
4. Enstriksyon Enstalasyon
Follow these steps to set up your XTUGA SF-1 wireless system:
- Chaje inite yo: Before first use, fully charge both the transmitter and receiver using the provided USB charging cables. The charging indicator light will show charging status.
- Identify Units: The unit labeled "TRANSMITTER" connects to your microphone. The unit labeled "RECEIVER" connects to your audio interface, mixer, or PA system.
- Connect Transmitter to Microphone: Plug the XLR male end of the transmitter directly into the XLR female output of your microphone. Ensure a secure connection.
- Connect Receiver to Audio Input: Plug the XLR female end of the receiver into an available XLR input on your audio interface, mixer, or PA system. If your input is 6.35mm, use the appropriate XLR to 6.35mm adapter provided.
- Pouvwa sou: Press and hold the POWER button on both the transmitter and receiver until their displays or indicator lights illuminate.
- Koneksyon (Otomatik): The units are designed to pair automatically upon power-on. The display on the transmitter and the RF indicator on the receiver will confirm a successful connection.
- Select Phantom Power (for Condenser Mics): If using a condenser microphone, ensure the transmitter's phantom power setting is appropriate (48V or 5V). This can typically be adjusted via a dedicated switch or button on the transmitter. Refer to the 'Operating Instructions' section for details on phantom power selection.

Image: Diagram showing the compatibility of the SF-1 system with dynamic mics, condenser mics, recorders, mixers, and PA systems.

Image: Illustration demonstrating the system's versatility and support for 48V phantom power for condenser microphones.
5. Operasyon Enstriksyon
Understanding the controls and functions of your SF-1 system:

Image: Detailed diagram of the transmitter and receiver with numbered components and their functions.
Kontwòl transmetè:
- XLR Female Plug: Li konekte ak mikwofòn nan.
- Chaje Endikatè Limyè: Endike estati chaje.
- Ekspozisyon ki monitè kè bebe: Shows remaining power, signal strength, frequency, and channel.
- CH Button (Frequency Switch): Short press to switch between available UHF frequencies (16 channels).
- VOL Button (Volume Control): Short press to cycle through 5 gain/volume levels. For best sound quality, it is recommended to set the gear to 5.
- POUVWA bouton: Peze epi kenbe pou pouvwa sou / koupe.
- Pò chaje: USB-C pò pou chaje.
Endikatè reseptè yo:
- XLR Male Plug: Connects to the audio input device.
- CHR (Charge) Indicator: Endike estati chaje.
- RF (Radio Frequency) Indicator: Illuminates when a stable wireless connection is established.
- AF (Audio Frequency) Indicator: Illuminates when audio signal is being received.
- POUVWA bouton: Peze epi kenbe pou pouvwa sou / koupe.
- Endikatè nivo batri: Montre dire lavi batri ki rete a.
- Pò chaje: USB-C pò pou chaje.
Channel and Frequency Management:
The SF-1 system offers 16 selectable UHF frequencies to minimize interference. If you experience signal drops or interference, short press the CH button on the transmitter to switch to a different frequency. The receiver will automatically sync to the new frequency.

Image: Depiction of multiple microphones connected to a mixer, illustrating the support for up to 16 simultaneous sets.
6. Antretyen
- Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye inite yo. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
- Swen batri: Recharge the units regularly, even if not in frequent use, to maintain battery health. Avoid fully depleting the battery before recharging.
- Depo: Sere inite yo nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
- Evite imidite: Keep the devices away from water and high humidity to prevent damage to internal components.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pwodiksyon son. | Units not powered on; Low battery; Not paired; Incorrect phantom power setting; Volume too low. | Ensure both units are powered on and charged. Check if RF indicator is lit on receiver. Adjust phantom power setting on transmitter if using condenser mic. Increase volume on transmitter and connected audio device. |
| Entèferans oswa bri estatik. | Nearby electronic devices; Channel conflict. | Move away from sources of interference (Wi-Fi routers, phones, TVs). Short press the CH button on the transmitter to switch to a different frequency. |
| Ranje limite. | Obstructions; Environmental factors. | Ensure clear line-of-sight between transmitter and receiver. Avoid using in areas with dense walls or metal structures. |
| Transmitter/Receiver not charging. | Faulty cable or power adapter; Charging port issue. | Try a different USB charging cable and power adapter. Ensure the cable is fully inserted into the charging port. |
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Non modèl | SF-1 |
| Koneksyon Teknoloji | UHF, XLR |
| Kalite Connector | XLR |
| Mikwofòn Fòm Faktè | Handheld (adapter for XLR microphones) |
| Sipò pou pouvwa fantom | 0V/5V/48V selectable |
| Rezolisyon odyo | 24-bit |
| Sampling Frekans | 48KHz |
| Latansi | Mwens pase 2ms |
| Kantite Chanèl | 16 |
| Range opere | Jiska 50 mèt (164 pye) |
| Sous pouvwa | Battery Powered (Rechargeable Lithium) |
| Lavi batri | 5-8 èdtan |
| Port chaje | USB-C |
| Dimansyon atik (L x W x H) | 6.69 x 7.09 x 2.36 pous |
| Pwa atik | 13.4 ons |
| Koulè | Nwa |
| Itilizasyon Rekòmande | Andedan kay la / Deyò |
| Aparèy konpatib | Audio Interface, Audio Mixer, Karaoke Machine, PA System |
9. Garanti ak sipò
For detailed warranty information and customer support, please refer to the official XTUGA websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha pou nenpòt reklamasyon garanti.
XTUGA Official Store: Visit the XTUGA Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.