Konpatib ak ekipman pouvwa ak kat prensipal RSAG7.820.10462/ROH pou HISENSE 58R6E3 (S/N: 58G21)

Pwodwi souview

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the RSAG7.820.10462/ROH Power Supply and Main Board, compatible with HISENSE 58R6E3 (S/N: 58G21) televisions. This part has been tested to ensure functionality.

Imaj: The RSAG7.820.10462/ROH Power Supply and Main Board. This image displays the full circuit board, highlighting various components such as USB ports, HDMI ports, audio/video input jacks, power supply capacitors, heat sinks, and the main processor area covered by a black heat spreader. The board is green with various electronic components soldered onto it, including resistors, capacitors, and integrated circuits. Markings like "COLD" and "HOT" indicate different sections of the power supply. A barcode and serial number are visible on the right side of the board.

Enfòmasyon sou Sekirite

Always disconnect the television from the power source before attempting any installation or maintenance. Static electricity can damage electronic components; use anti-static precautions (e.g., anti-static wrist strap) when handling the board. If you are unsure about any step, consult a qualified technician.

Enstalasyon ak Enstalasyon

This section outlines the steps for replacing or installing the main board.

Preparasyon:
- Ensure the television is unplugged from the wall outlet.
- Mete televizyon an fas anba sou yon sifas mou epi pwòp pou evite domaje ekran an.
- Rasanble zouti ou bezwen yo: tournevis Phillips, braslè ponyèt anti-estatik.
Accessing the Main Board:
- Remove the back cover of the television by unscrewing all retaining screws.
- Carefully lift and set aside the back cover.
Disconnecting the Old Board (if applicable):
- Identify all cables connected to the existing main board (e.g., power cables, ribbon cables, speaker cables, input/output cables).
- Gently disconnect each cable. Note their positions for reassembly.
- Unscrew the main board from the television chassis.
- Carefully remove the old board.
Enstale Nouvo Komisyon Konsèy la:
- Align the new RSAG7.820.10462/ROH board with the mounting holes in the television chassis.
- Secure the board with the appropriate screws.
- Reconnect all cables, ensuring they are firmly seated in their respective ports. Pay close attention to the orientation of ribbon cables.
Etap final yo:
- Replace the television back cover and secure it with all screws.
- Carefully return the television to its upright position.
- Plug the television into a power outlet.

Enstriksyon Operasyon

Once the main board is correctly installed, the television should power on normally. The main board manages all core functions of the television, including video processing, audio output, and input management.

Pouvwa sou: Press the power button on the television or remote control.
Seleksyon Antre: Use the remote control to select the desired input source (HDMI, AV, USB, etc.).
Tcheke fonksyonalite: Verify that all ports (HDMI, USB, AV) and functions (picture, sound) are working as expected.

Antretyen

The RSAG7.820.10462/ROH main board is designed for long-term reliability. Minimal maintenance is required.

Netwayaj: Keep the television's ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the board.
Anviwònman: Operate the television in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.
Onn pouvwa: Consider using a surge protector to safeguard the television and its internal components from electrical fluctuations.

Depanaj

If you encounter issues after installing the main board, refer to the following common problems and solutions:

Pwoblèm	Kòz posib	Solisyon
No Power / TV Does Not Turn On	Loose power connection, faulty power supply unit (PSU) section on the board, incorrect installation.	Check if the power cord is securely plugged into the wall and the TV. Verify all internal power connections to the main board are secure. Asire w ke priz kouran an fonksyone.
Pa gen imaj / Ekran nwa	Loose display ribbon cable, incorrect input selection, backlight issue (not directly main board).	Ensure the display ribbon cable (LVDS cable) is properly connected to the main board and the display panel. Confirm the correct input source is selected. Test with a known working video source.
Pa gen Son	Loose speaker cables, audio settings, faulty audio circuit on the board.	Check speaker cable connections to the main board. Verify volume settings and mute status. Fè tès ak diferan sous odyo.
Input Ports Not Working (HDMI, USB, AV)	Loose port connections, damaged port, software issue.	Ensure cables are fully inserted into the ports. Test with different cables and devices. Perform a factory reset of the TV (if accessible via menu).

Si etap sa yo pa rezoud pwoblèm nan, ou ka bezwen asistans pwofesyonèl.

Espesifikasyon

Key specifications for the RSAG7.820.10462/ROH Power Supply and Main Board:

Non modèl: RSAG7.820.10462
Aparèy konpatib: Television (specifically HISENSE 58R6E3)
Kalite Konektè pouvwa prensipal: 24-Pin
Entèfas kat grafik: PCI Express (Note: This refers to internal board architecture, not an external slot)
Plas memwa ki disponib: 2 (Internal to the board, not user-accessible)
Kantite pò: 3 (referring to specific types of ports)
Total Ethernet Ports: 1
Total pò HDMI: 1
Total PCI E- Ports: 1 (Internal to the board)
Manifakti: ddc
ASIN: B0CPJSVMMQ

Garanti ak sipò

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the documentation provided with your purchase or contact the seller directly.

For technical support or assistance with installation and troubleshooting, please contact the seller or manufacturer through the platform where the product was purchased. Provide your product model number (RSAG7.820.10462) and purchase details for faster service.