Enfòmasyon enpòtan sou sekirite
Read this instruction manual carefully before use to ensure safe operation and prevent damage to the product or injury.
This product is not a toy and should be operated with caution. Keep out of reach of small children. Always ensure proper battery installation and disposal. Do not expose the device to moisture or extreme temperatures.
Pwodwi souview
An image showing the Absima CR9T RC Pistol Transmitter, a black and grey device with a screen displaying numerical information and a large steering wheel on the right side. The handle is ergonomically designed for grip.
The Absima CR9T is a 2.4 GHz 9-channel RC pistol transmitter designed for precise control of remote-controlled vehicles. It features an ergonomic design, a clear display for settings, and intuitive controls for an enhanced user experience.
Enstalasyon
- Enstalasyon batri: Open the battery compartment cover located at the bottom of the transmitter. Insert the required batteries (not included) according to the polarity indicators. Close the cover securely.
- Obligasyon reseptè: Refer to your receiver's manual for specific binding instructions. Generally, power on the receiver in binding mode, then power on the transmitter while holding the bind button (if applicable).
- Kalibrasyon inisyal: After binding, perform a basic calibration of the steering and throttle channels to ensure proper response.
Enstriksyon Operasyon
- Limen/Etenyen: Press and hold the power button until the display illuminates/shuts off.
- Kontwòl volan: Use the steering wheel on the right side to control the vehicle's direction.
- Kontwòl gaz: Use the trigger for forward and reverse movement. Pull for forward, push for reverse.
- Channel Assignment: Utilize the various switches and knobs on the transmitter to control auxiliary channels (e.g., lights, winches) as configured on your receiver.
- Montre Navigasyon: Use the navigation buttons around the screen to access and adjust settings such as trim, EPA (End Point Adjustment), D/R (Dual Rate), and model memory.
Antretyen
- Netwayaj: Use a soft, dry cloth to clean the transmitter. Do not use harsh chemicals or solvents.
- Depo: Sere transmetè a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm. Retire pil yo si w ap sere l pou yon bon bout tan.
- Swen batri: Always use fresh batteries of the recommended type. Do not mix old and new batteries or different battery types.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Transmitter does not power on | Batri ki mouri oswa mal enstale | Ranplase pil yo; verifye polarite a |
| No control response from vehicle | Not bound to receiver; receiver not powered; out of range | Re-bind transmitter and receiver; check receiver power; move closer to vehicle |
| Erratic control | Interference; low battery on transmitter/receiver | Move to a different location; replace batteries |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Dimansyon pwodwi | 14 x 10 x 18.5 cm |
| Pwa | 320 g |
| Nimewo Modèl Atik | 2000012 |
| Kantite Atik | 1 |
| Batri obligatwa? | No (for product, but required for operation) |
| Batri enkli? | Non |
| ASIN | B0CP34F5K2 |
| Premye Dat ki disponib | 24 avril 2024 |
Garanti ak sipò
We understand that it can be frustrating if a product does not work properly or becomes defective. Fortunately, we provide a warranty for a period of at least 2 years after purchase.
For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Absima websit la. Tanpri kenbe nimewo modèl ou a (2000012) ak prèv acha a pare lè w ap kontakte sipò a.