TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun

1. Entwodiksyon

Thank you for choosing the TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun. This portable tool is designed for various applications requiring precise heat, such as welding, heat shrink tubing, and loosening rusted bolts. Its cordless design offers excellent mobility and convenience. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image 1.1: The TOTAL TBLI2002 Cordless Heat Gun. This image shows the main unit of the heat gun, highlighting its ergonomic design and the nozzle at the front.

2. Enstriksyon Sekirite

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this tool.

• Li tout enstriksyon yo: Familyarize w avèk operasyon zouti a ak règleman sekirite yo.
• Sekirite Pèsonèl: Mete ekipman pwoteksyon pèsonèl ki apwopriye, tankou linèt sekirite ak gan ki reziste chalè.
• Zòn travay: Ensure your work area is well-ventilated and free from flammable materials. Do not use in explosive atmospheres.
• Evite kontak: The nozzle and accessories become extremely hot during and after use. Avoid direct contact with skin.
• Depo apwopriye: Allow the tool to cool completely before storing. Store in a dry, secure place out of reach of children.
• Sekirite batri: Use only specified 20V Lithium-Ion batteries and chargers (sold separately). Do not expose batteries to heat or water.
• Pwoteksyon Surchof: The tool is equipped with overheat protection. If it shuts off, allow it to cool before resuming use.

3. Pwodwi souview

Understand the main components of your TOTAL TBLI2002 heat gun.

1. Heat Nozzle: Dirije lè cho a.
2. Vant lè: For cooling and air intake.
3. Pouvwa switch: Controls ON/OFF and temperature/airflow settings.
4. Manch: Priz ergonomik pou yon itilizasyon konfòtab.
5. Pò batri: Where the 20V Lithium-Ion battery (sold separately) is inserted.

Imaj 3.1: Eksploze view of the heat gun showing included nozzles and a diagram of the battery compartment. This image illustrates the main components and how accessories attach.

Image 3.2: Close-up of the product label, detailing voltage, temperature, and airflow specifications.

4. Enstalasyon

4.1 Enstalasyon batri

The TOTAL TBLI2002 requires a 20V Lithium-Ion battery, which is sold separately. Ensure the battery is fully charged before use.

• Align the battery with the battery port at the base of the heat gun handle.
• Glise batri a nan pò a jiskaske li fè yon klik byen fèm nan plas li.
• To remove, press the battery release button (if present) and slide the battery out.

Imaj 4.1: Kote view of the heat gun with a 20V battery attached, demonstrating proper battery installation.

4.2 Atachman bouch

The heat gun comes with various nozzles for different applications:

• Reduction Nozzle: For concentrating heat on small areas.
• Bouch Reflektè: For heat shrink tubing or bending plastic pipes.
• Bouch plat: For spreading heat over a wider area, such as paint stripping.

To attach a nozzle:

• Ensure the heat gun is off and cool.
• Slide the desired nozzle onto the heat nozzle until it is firmly seated.
• To remove, pull the nozzle off once the tool has cooled.

Image 4.2: The heat gun shown with a flat nozzle attached, ready for use.

5. Operasyon Enstriksyon

5.1 Powering On/Off and Temperature/Airflow Settings

The power switch typically has multiple positions to control both power and heat/airflow settings.

• OFF (0): The tool is off.
• Anviwònman 1: Provides lower temperature (300°C) and lower airflow (100 L/min).
• Anviwònman 2: Provides higher temperature (550°C) and higher airflow (200 L/min).

Pou opere:

1. Ensure the battery is installed and a suitable nozzle is attached.
2. Slide the power switch to the desired setting (1 or 2). The tool will begin to heat up.
3. Direct the hot air towards the workpiece, maintaining a safe distance to avoid scorching or damage.
4. After use, slide the power switch to the OFF (0) position.
5. Allow the tool to cool down completely before handling the nozzle or storing.

Imaj 5.1: Anlè view of the heat gun, showing the power switch with its distinct settings.

5.2 Konsèy Jeneral pou Itilizasyon

• Always test on a scrap piece of material first to determine the optimal temperature and distance.
• Keep the heat gun moving to prevent overheating a single spot.
• For delicate materials, use the lower temperature setting and maintain a greater distance.

6. Antretyen

Antretyen regilye asire lonjevite ak fonksyònman an sekirite nan pistolè chalè ou a.

• Netwayaj: After each use, ensure the tool is cool. Wipe the exterior with a soft, damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
• Ayerasyon klè: Regularly check and clear the air intake and exhaust vents of any dust or debris to prevent overheating. Use a soft brush or compressed air if necessary.
• Swen bouch: Clean nozzles after use, ensuring they are free of residue.
• Depo: Store the heat gun and its accessories in a dry, clean, and secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed for long-term storage.

Imaj 6.1: Devan view of the heat gun, highlighting the air vents that require regular cleaning.

NAN. Depanaj

Si ou rankontre pwoblèm ak pistol chalè ou a, gade pwoblèm ak solisyon komen sa yo:

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Total Tools websit la. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.

For further assistance, please contact Total customer service.