Nikko RC 1:18 Night Mode RC Car User Manual

1. Entwodiksyon

Welcome to the user manual for your new Nikko RC 1:18 Night Mode RC Car. This high-performance remote-controlled vehicle is designed for thrilling races with its full function speed and integrated LED race lights. The 2.4GHz precision controller ensures excellent range and responsive control, allowing for an immersive driving experience. Please read this manual thoroughly before operating your RC car to ensure safe and optimal performance.

Image: The Nikko RC 1:18 Night Mode RC Car displayed in its retail packaging, highlighting its features and design.

2. Prekosyon Sekirite Enpòtan

Tanpri swiv règ sekirite sa yo pou evite blesi oswa domaj:

• AVÈTISMAN: DANJE TOUFE – Small parts. Not intended for children under 3 years.
• Adult supervision is recommended for young children.
• Pa kondui machin nan toupre moun, bèt kay, oswa obstak.
• Avoid operating in wet conditions or on public roads.
• Pa manyen pati k ap deplase pandan operasyon an.
• Use only the recommended batteries and follow proper battery installation and disposal procedures.

3. Ki sa ki nan bwat la

Your Nikko RC 1:18 Night Mode RC Car package should contain the following items:

• 1 x Nikko RC 1:18 Night Mode RC Car
• 1 x 2.4GHz Precision Controller
• 1 x Manyèl pwodwi (dokiman sa a)

4. Enstalasyon

4.1. Enstalasyon Batri (Machin RC)

1. Jwenn konpatiman batri a anba machin RC a.
2. Sèvi ak yon tournevis, louvri kouvèti lòj batri a.
3. Insert the required batteries (refer to the car's battery type and quantity markings, typically AA or AAA, not included) ensuring correct polarity (+/-).
4. Fèmen kouvèti lòj batri a epi an sekirite li ak vis la.

4.2. Enstalasyon pil (Kontwolè)

1. Jwenn konpatiman batri a sou dèyè kontwolè a.
2. Louvri kouvèti lòj batri a.
3. Insert the required batteries (typically AA or AAA, not included) ensuring correct polarity (+/-).
4. Fèmen kouvèti lòj batri a.

4.3. Pairing the Car and Controller

Your Nikko RC car and controller are designed to pair automatically. Follow these steps:

1. Ensure fresh batteries are installed in both the RC car and the controller.
2. Turn on the RC car using the ON/OFF switch, usually located on the underside.
3. Turn on the controller using its ON/OFF switch.
4. The car and controller should automatically connect. A light on the controller may indicate a successful connection. If not, turn both off and try again.

Image: The Nikko RC 1:18 Night Mode RC Car positioned next to its 2.4GHz precision controller, illustrating the main components.

5. Operasyon Enstriksyon

5.1. Kontwòl debaz yo

The 2.4GHz precision controller provides full-function multi-directional control:

• Avant/Atè: Use the left joystick/trigger to move the car forward or backward.
• Volan gòch/dwat: Use the right joystick/wheel to steer the car left or right.
• Fonksyon konplè: The car is capable of precise movements, including turns while moving forward or backward.

5.2. LED Race Lights

The Nikko RC Night Mode car features integrated LED race lights. These lights activate automatically when the car is powered on, enhancing visibility and adding to the racing experience, especially in low-light conditions.

Imaj: Yon fasad detaye view of the Nikko RC 1:18 Night Mode RC Car, showcasing its design and the prominent LED light bar.

5.3. Multi-Band Racing

The 2.4GHz frequency allows for multi-band racing, enabling up to 10 players to race at once without interference. Ensure each car and controller pair is properly linked before starting a multi-player race.

6. Antretyen

6.1. Netwayaj

• Wipe the car and controller with a soft, damp twal. Pa sèvi ak pwodwi chimik piman bouk oswa solvang.
• Remove any debris (dirt, hair, etc.) from the wheels and axles to ensure smooth operation.

6.2. Swen batri

• Always remove batteries from the car and controller when not in use for extended periods.
• Pa melanje ansyen ak nouvo pil, oswa diferan kalite pil.
• Jete pil yo itilize yon fason responsab selon règleman lokal yo.

6.3. Depo

• Store the RC car and controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep them away from dust and moisture.

NAN. Depanaj

If you encounter issues with your Nikko RC car, try the following solutions:

• Machin nan pa reponn:
  • Check if both the car and controller are turned ON.
  • Replace batteries in both the car and controller with fresh ones.
  • Ensure the car and controller are properly paired (refer to Section 4.3).
  • Make sure you are within the operating range of the controller.
• Pèfòmans pòv/vitès dousman:
  • Pil yo ka fèb; ranplase yo.
  • Check for debris in the wheels or axles.
  • Ensure you are operating on a suitable surface (smooth, flat surfaces are ideal).
• Entèferans:
  • Ale lwen lòt aparèy elektwonik ki ka lakòz entèferans.
  • If racing with multiple cars, ensure each car/controller pair is distinct and not interfering with others.

8. Espesifikasyon

Key technical details for the Nikko RC 1:18 Night Mode RC Car:

• Nimewo Modèl: 10395
• Echèl: 1:18
• Frekans kontwòl: 2.4GHz
• Vitès maksimòm: Up to 5.5 MPH / 9 KPH
• Karakteristik: Full-function multi-directional remote control, LED Race Lights, Multi-band racing (up to 10 players)
• Dimansyon pwodwi: 6.5 x 13 x 6 pous
• Pwa atik: 1.57 liv
• Manifakti a laj rekòmande: 6 ane ak plis
• Dat lage: 20 novanm 2023
• Manifakti: Nikko

Imaj: Yon pwofesyonèl bò kotefile view of the Nikko RC 1:18 Night Mode RC Car, highlighting its compact design and rally car aesthetics.

Imaj: Yon dèyè view of the Nikko RC 1:18 Night Mode RC Car, showing the spoiler and rear light details.

9. Garanti ak Sipò Kliyan

Nikko Toys stands behind the quality of its products. For specific warranty information, please refer to the packaging or visit the official Nikko Toys website. If you have any questions, require technical assistance, or need to report an issue, please contact Nikko customer support.

For more information and support, you can visit the official Nikko Toys websit: https://nikkotoys.com/qr/016