EVTSCAN Projection Clock User Manual

1. Enfòmasyon enpòtan sou sekirite

Please read all instructions carefully before using the EVTSCAN Projection Clock. Keep this manual for future reference.

• Pa ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite ki wo.
• Avoid dropping or subjecting the clock to strong impacts.
• Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte pèsonèl sèvis kalifye.
• Use only the specified power adapter (DC 5.0V, 1.2A) or appropriate batteries (2xAAA, not included).
• Kenbe soti nan atenn timoun yo.

2. Pwodwi souview

The EVTSCAN Projection Clock is a versatile digital alarm clock featuring a 3-inch backlit LCD screen that displays time, date, day of the week, temperature, and humidity. It includes a projection function to display time and temperature on a wall or ceiling, dual alarms with snooze, and a USB port for charging mobile phones.

Karakteristik kle:

• 12/24-hour time format display.
• Date and day of the week display (7 languages for week).
• Temperature detection (-9℃ to +50℃) and humidity detection (20% to 95%).
• Projection function with 180-degree rotation for time and temperature.
• Dual alarm clocks with slowly increasinvolim g.
• 5-minute snooze function.
• USB charging port for mobile devices.
• Adjustable backlight with 4 levels (high, medium, low, off).

Figi 2.1: Devan view of the EVTSCAN Projection Clock, showing the LCD display and projection lens.

3. Pake kontni

Lè w ap debale, tanpri asire w ke tout atik ki nan lis anba a yo la epi yo an bon kondisyon:

• 1 x EVTSCAN Projection Clock
• 1 x USB kab
• 1 x manyèl itilizatè angle

Note: 2xAAA batteries are required for battery power and are not included in the package.

4. Enstalasyon

4.1 Alimente Aparèy la

The EVTSCAN Projection Clock can be powered by either AAA batteries or via the included USB cable.

4.1.1 Enstalasyon batri

1. Jwenn kouvèti konpatiman pil la sou dèyè revèy la.
2. Slide open the cover.
3. Mete de (2) pil AAA, asire w polarite a kòrèk (+/-).
4. Fèmen kouvèti lòj batri a byen.

Note: When powered by batteries, the backlight will only light up for 8 seconds when activated to conserve power. The projection lamp will also light up for 8 seconds.

4.1.2 USB Power Connection

1. Connect the small end of the provided USB cable to the DC 5.0V 1.2A input port on the back of the clock.
2. Connect the larger end of the USB cable to a compatible USB power adapter (not included) or a powered USB port.

Note: When powered by USB, the backlight and projection lamp can remain continuously on, with adjustable brightness for the backlight.

Figi 4.1: Dèyè view of the clock, indicating the battery compartment and DC 5.0V 1.2A power input.

5. Operasyon Enstriksyon

5.1 Fonksyon bouton

Familiarize yourself with the control buttons located on the front and sides of the clock:

• TAN: Antre nan mòd reglaj tan.
• ALAM: Antre nan mòd konfigirasyon alam.
• +: Increases values, switches 12/24HR format, adjusts backlight.
• -: Decreases values, switches temperature units (℃/℉).
• Pwojeksyon ON/OFF switch: Activates or deactivates the projection. (Located on the back/side)
• Alarm 1 ON/OFF Switch: Activates or deactivates Alarm 1. (Located on the side)
• Alarm 2 ON/OFF Switch: Activates or deactivates Alarm 2. (Located on the side)

Figi 5.1: Side view showing Alarm 1 and Alarm 2 ON/OFF switches, and the USB charging port.

5.2 Mete Lè ak Dat

1. Peze epi kenbe la TAN button to enter time setting mode. The hour display will flash.
2. Sèvi ak la + or - bouton pou ajiste lè a.
3. Peze TAN again to confirm the hour and move to minute setting. Adjust with + or -.
4. Kontinye peze TAN to cycle through setting year, month, and day. Adjust each with + or -.
5. Apre ou fin mete jou a, peze TAN yon dènye fwa pou sòti nan mòd paramèt.
6. Pou chanje ant fòma 12 èdtan ak 24 èdtan, peze bouton an + button during normal time display.
7. To switch between Celsius (℃) and Fahrenheit (℉) for temperature, press the - button during normal time display.

5.3 Mete Alam yo

Revèy la gen de alam endepandan (Alam 1 ak Alam 2).

1. Peze epi kenbe la ALAM button to enter Alarm 1 setting mode. The Alarm 1 hour display will flash.
2. Sèvi ak la + or - bouton pou ajiste lè alam la.
3. Peze ALAM again to confirm the hour and move to Alarm 1 minute setting. Adjust with + or -.
4. Peze ALAM again to move to Alarm 2 hour setting, and repeat the process for Alarm 2.
5. After setting Alarm 2 minutes, press ALAM yon dènye fwa pou sòti nan mòd paramèt.
6. To activate or deactivate an alarm, use the corresponding Alam 1 ON/OFF or Alam 2 ON/OFF switch on the side of the clock. An alarm icon will appear on the display when active.

5.3.1 Repete Fonksyon

When an alarm sounds, press any button (except the alarm ON/OFF switch) to activate the 5-minute snooze function. The alarm will sound again after 5 minutes. To turn off the alarm completely, slide the corresponding alarm ON/OFF switch to OFF.

5.4 Fonksyon Pwojeksyon

The clock can project the time and temperature onto a wall or ceiling.

1. Jwenn la Pwojeksyon ON/OFF switch on the back of the clock. Slide it to ON to activate the projection.
2. Adjust the angle of the projection arm (the part with the lens) to direct the projection as desired. The arm can rotate nearly 180 degrees.
3. The projection will display the current time and temperature in a soft red color.

Figi 5.2: Side view showing the projection arm extended and ready for use.

Figi 5.3: The clock projecting time and temperature onto a wall in a bedroom setting.

5.5 Ajisteman ekleraj

When the clock is powered by USB, the backlight can be adjusted to four levels: high, medium, low, or off. Repeatedly press the + button during normal time display to cycle through the brightness levels.

When powered by batteries, the backlight will illuminate for 8 seconds when any button is pressed, then turn off to conserve power.

5.6 USB chaje Port

The clock features a USB charging port (5V=1A) on its side. You can use this port to charge your mobile phone or other small electronic devices while the clock is connected to USB power.

Note: The USB charging port only functions when the clock is powered via the USB cable. It does not work when the clock is running on battery power.

6. Antretyen

6.1 Netwayaj

• Siye sifas revèy la ak yon twal mou epi sèk.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• Keep the projection lens clean for clear projection. Use a soft, lint-free cloth.

6.2 Ranplasman batri

When the display becomes dim or the clock functions erratically while on battery power, it's time to replace the AAA batteries. Refer to Section 4.1.1 for battery installation instructions. Always replace both batteries at the same time with new ones.

NAN. Depanaj

8. Espesifikasyon

Figi 8.1: Product dimensions: 5.3 inches wide by 3.1 inches high.

9. Garanti ak sipò

EVTSCAN products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your retailer.

If you encounter any issues or have questions regarding your EVTSCAN Projection Clock, please contact the seller or EVTSCAN customer support for assistance. Please have your model number (B0CLGDFCGX) ready when contacting support.

Pou plis asistans, ou ka vizite EVTSCAN Store on Amazon.