Flama 1317FL Dehumidifier User Manual

1. Enstriksyon Sekirite Enpòtan

Please read all instructions carefully before using the Flama 1317FL Dehumidifier. Keep this manual for future reference.

• Asire ekipman pou pouvwa a voltage koresponn ak etikèt klasman ki sou aparèy la.
• Do not operate the dehumidifier with a damaged cord or plug. If damaged, contact qualified service personnel.
• Always place the unit on a firm, level surface to prevent water spillage.
• Maintain at least 20 cm (8 inches) clearance around the unit for proper airflow.
• Pa mete objè nan antre oswa priz lè a.
• Debranche aparèy la anvan ou netwaye li oswa fè nenpòt antretyen.
• Aparèy sa a se pou itilizasyon domestik sèlman.
• Do not use in bathrooms or other excessively humid environments where water contact is possible.
• Kenbe soti nan atenn timoun yo.

2. Pwodwi souview

The Flama 1317FL Dehumidifier is designed to reduce humidity levels in your home, improving air quality and comfort. It features an integrated display for easy monitoring and control, a light indicator, and an automatic shut-off function for safety.

2.1 Eleman

• Main Unit (Dehumidifier)
• Tank dlo (kapasite 2 lit)
• Filtè lè ou ka lave
• Kòd pouvwa

2.2 Karakteristik

• Ekspozisyon entegre: For clear display of settings and current humidity.
• Limyè Endikatè: Provides visual status of operation.
• Tanperati reglabl: Allows for customized operation.
• Filtre ou ka lave: Easy to clean and maintain for optimal performance.
• Otomatik fèmen: Unit automatically turns off when the water tank is full or when desired humidity is reached.
• Konsepsyon kontra enfòmèl ant: Dimensions approximately 39.26 x 37.56 x 40.8 cm.

Figi 1: Devan view of the Flama 1317FL Dehumidifier, showing its compact design and control panel.

3. Enstalasyon

1. Debake: Retire dezumidifikatè a nan anbalaj li avèk prekosyon. Kenbe materyèl anbalaj yo pou depo oswa transpò pita.
2. Plasman: Place the unit on a stable, level surface in the room where dehumidification is desired. Ensure there is at least 20 cm (8 inches) of clear space around all sides for adequate air circulation. Do not block the air inlet or outlet.
3. Koneksyon pouvwa: Ensure the water tank is correctly inserted. Plug the power cord into a grounded electrical outlet.
4. Premye itilizasyon: Allow the unit to stand upright for at least 1 hour before plugging it in if it has been transported horizontally. This allows the refrigerant to settle.

4. Operasyon Enstriksyon

4.1 Kontwòl Panel

The control panel features an integrated display and various buttons for setting the desired humidity level, fan speed, and timer functions. Refer to the display for current settings and status indicators.

4.2 Limen/Etenyen

• Peze a Pouvwa button to turn the unit on. The display will illuminate, and the fan will start.
• Peze a Pouvwa bouton ankò pou fèmen inite a.

4.3 Ajisteman Imidite Dezire a

• Sèvi ak la Imidite button (or up/down arrows) to select your desired humidity level. The display will show the target humidity.
• The unit will operate until the room humidity reaches the set level, then it will cycle on and off to maintain it.

4.4 Water Tank Full Indicator and Automatic Shut-off

When the 2-liter water tank is full, the unit will automatically shut off, and a light indicator (often labeled "Full" or "Tank") will illuminate. Empty the water tank and reinsert it correctly for the unit to resume operation.

1. Rale tank dlo a avèk prekosyon pa devan oswa sou kote aparèy la.
2. Empty the collected water into a sink.
3. Slide the empty water tank back into its position until it clicks securely.
4. The unit will restart automatically if it was in operation mode.

5. Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje dire lavi dezumidifikatè ou a.

5.1 Netwaye filtè lè a

The Flama 1317FL features a washable air filter. Clean the filter every two weeks or more frequently if the unit is used in a dusty environment.

1. Debranche dezumidifikatè a nan priz kouran an.
2. Jwenn epi retire filtè lè a (anjeneral li nan dèyè oswa sou kote aparèy la).
3. Wash the filter gently under running tap water. For heavy dirt, use a mild detergent and rinse thoroughly.
4. Kite filtè a seche nèt nan lè a anvan ou mete l tounen nan aparèy la. Pa sèvi ak yon seche rad oswa chalè dirèk.
5. Remete filtè sèk la epi branche aparèy la ankò.

5.2 Netwayaj Eksteryè Inite a

• Deploge inite a anvan w netwaye.
• Siye eksteryè a ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki agresif.
• Asire w ke pa gen dlo ki antre nan konpozan entèn yo.

5.3 Depo

Si w ap estoke aparèy la pou yon peryòd tan pwolonje:

• Vide tank dlo a nèt epi netwaye li.
• Netwaye filtè lè a.
• Sere aparèy la nan yon pozisyon dwat nan yon kote ki fre epi sèk, lwen limyè solèy dirèk.

NAN. Depanaj

Anvan ou kontakte sèvis kliyan, tanpri gade gid depanaj sa a.

7. Espesifikasyon

8. Garanti ak sipò

Information regarding warranty coverage and duration is typically provided with your purchase documentation or on the manufacturer's official websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.

For technical support, spare parts, or service inquiries, please contact Flama customer service. Contact details can usually be found on the product packaging or the official Flama websit.

Note: Availability of spare parts and software updates is not specified in the product information provided.