ONVIAN 2000 Lumen Rechargeable Bike Headlight User Manual

1. Entwodiksyon

Thank you for choosing the ONVIAN 2000 Lumen Rechargeable Bike Headlight. This manual provides essential information for the safe and effective use of your new bike light. Please read it thoroughly before installation and operation, and retain it for future reference.

2. Enfòmasyon sou Sekirite

• Toujou asire w ke limyè a byen monte anvan ou monte bisiklèt.
• Pa gade dirèkteman nan reyon limyè a pou evite pwoblèm vizyon tanporè.
• Kenbe limyè a lwen timoun yo.
• Use only the provided USB-A to USB-C cable for charging. Using other USB-C cables or power delivery (PD) chargers may not work or could potentially damage the device due to non-standard USB-C implementation.
• Evite demonte limyè a, paske sa ka anile garanti a epi domaje li.
• Ensure the USB-C port cover is properly sealed when not charging to maintain water resistance.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• ONVIAN 2000 Lumen Bike Headlight
• Aluminum Alloy Handlebar Bracket
• USB-A pou USB-C chaje kab
• Various Shims and Non-slip Pads for Handlebar Mounting

4. Pwodwi Features

• Klate: Up to 2000 Lumens for enhanced visibility.
• Mòd ekleraj: Four distinct modes: Low Beam, High Beam, Low+High Beam, and Flashing.
• Batri: Integrated 4000mAh rechargeable Lithium-Ion battery.
• Chaje: USB-C port (5V/2A input) with blue power indicators.
• Konstriksyon: Durable aluminum alloy housing.
• Rezistans dlo: Evalyasyon ki enpèmeyab IPX5.
• Enstalasyon: Tool-free mounting system for handlebars 20-30mm in diameter.
• Beam Design: German anti-glare design to prevent dazzling oncoming traffic and pedestrians.

Image: Key features of the ONVIAN Bike Headlight, including its 2000 lumen output and multiple modes.

Image: Illustration of the anti-glare German design, demonstrating how it prevents blinding pedestrians and drivers.

5. Enstalasyon ak Enstalasyon

The ONVIAN bike headlight features a tool-free installation process.

1. Prepare bracket la: Select the appropriate shims and non-slip pads to match your handlebar diameter (20-30mm). Place them inside the handlebar connector.
2. Attach to Handlebar: Position the bracket on your bicycle handlebar. Tighten the knob by hand until the bracket is secure and does not move freely.
3. Mount the Headlight: Slide the ONVIAN headlight onto the bracket until it clicks into place. Ensure it is firmly seated.
4. Ajiste ang: The headlight can be easily twisted and adjusted to the desired angle for optimal illumination.
5. Retire: To remove, simply twist the light off the bracket. The bracket can remain on the handlebar.

Image: Step-by-step installation guide for the bike headlight on a handlebar.

6. Operasyon Enstriksyon

The ONVIAN bike headlight features a single ON/OFF button to control all lighting modes.

1. Pouvwa sou: Press the ON/OFF button located on the side of the light to turn it on.
2. Mòd sik: Each subsequent press of the ON/OFF button will cycle through the four available lighting modes in the following order:
   • Low Beam: The two outer lights illuminate.
   • Gwo gwo bout bwa: The center light illuminates.
   • Low + High Beam: All three lights illuminate for maximum brightness.
   • Flache: All lights flash.
3. Pouvwa Off: After cycling through all modes, pressing the button again will turn the light off.

Image: Visual representation of the four distinct lighting modes.

7. Chaje Enstriksyon

The bike headlight is equipped with a built-in 4000mAh rechargeable battery.

1. Konekte Charger: Open the protective cover over the USB-C port on the side of the light. Connect the provided USB-A to USB-C charging cable to the light and a compatible 5V/2A USB power source.
2. Siveye chaje: Blue power indicator lights on the side of the light will illuminate to show charging progress.
3. Chaj konplè: A full charge typically takes approximately 4.5 hours. All blue indicator lights will remain solid when fully charged.
4. Lavi batri: The light offers a run time of 2-3.5 hours on low and flash modes, and up to 4 hours on high beam, depending on the selected mode.
5. Seal Port: After charging, ensure the USB-C port cover is securely closed to maintain the light's waterproof integrity.

Image: The USB-C charging port and battery indicator lights during charging.

Image: Battery specifications and estimated run times for each lighting mode.

8. Antretyen

• Netwayaj: Siye deyò limyè a ak yon twal mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Depo: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery to approximately 50% every 3-6 months to prolong battery life.
• Rezistans dlo: Regularly check the USB-C port cover for proper sealing to ensure water resistance.
• Swen batri: Avoid fully depleting the battery frequently, as this can reduce its overall lifespan.

NAN. Depanaj

10. Espesifikasyon

11. Garanti ak sipò

For warranty information or technical support, please contact Onvian customer service through the retailer where the product was purchased or visit the official Onvian store page:

Visit the Onvian Store

Please have your model number (B0CKP7NPWT) and purchase details ready when contacting support.