GRUNDIG 8711252245119

GRUNDIG Ring Light Selfie with Tripod - User Manual

Modèl: 8711252245119

Entwodiksyon

Thank you for choosing the GRUNDIG Ring Light Selfie with Tripod. This device is designed to provide optimal and adjustable lighting for your photos, videos, vlogs, and live streams. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

Pwodwi konpozan

  • Ring Light with integrated USB cable and control panel
  • Vrtilni reglabl
  • Detantè telefòn fleksib

Enstriksyon Enstalasyon

  1. Depake konpozan: Retire tout atik yo nan anbalaj la avèk prekosyon.
  2. Attach Ring Light to Tripod: Screw the ring light onto the top of the tripod stand until secure.
  3. Mount Phone Holder: Insert the flexible phone holder into the designated slot on the ring light or tripod, ensuring it is firmly attached.
  4. Position Tripod: Extend the tripod legs to a stable position on a flat surface.
  5. Konekte pouvwa: Plug the USB cable from the ring light into a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port).
GRUNDIG Ring Light Selfie with Tripod assembled

Imaj: Devan view of the GRUNDIG Ring Light Selfie with Tripod, fully assembled and ready for use. A smartphone is mounted in the center of the ring light.

Enstriksyon Operasyon

Fonksyon Panel Kontwòl

The control panel is located on the USB cable. It features buttons for power, brightness adjustment, and color mode selection.

Control panel on GRUNDIG Ring Light USB cable

Image: Close-up of the in-line control panel on the USB cable, showing buttons for power, brightness increase/decrease, and color mode selection.

  • Limen/Etenyen: Peze a Bouton pouvwa (usually marked with an 'On/Off' symbol) to turn the ring light on or off.
  • Ajiste klète: Sèvi ak la '+' epi '-' buttons to increase or decrease the light intensity. There are 11 brightness levels available.
  • Chanje mòd koulè: Peze a Bouton mòd koulè (often marked with a circle or sun symbol) to cycle through the 3 available light colors:
    • Cool Blan
    • Cho Jòn
    • Net Blan

Adjusting the Ring Light and Phone Holder

  • Ring Light Angle: The ring light can be tilted and rotated to achieve the desired lighting angle. Loosen the adjustment knob on the tripod head, position the light, and then tighten the knob.
  • Phone Holder Position: The flexible arm of the phone holder allows for various adjustments. Bend the arm to position your smartphone precisely. The holder is universally compatible with smartphones between approximately 58mm and 90mm width.
Adjustable angles and universal phone compatibility

Image: Diagram illustrating the adjustable angles of the ring light and the rotatable, universally compatible phone holder (58-90mm width).

Antretyen

  • Netwayaj: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the ring light and tripod. Do not use abrasive cleaners or solvents.
  • Depo: Store the ring light in a cool, dry place away from direct sunlight and moisture. If storing for extended periods, ensure the cable is not kinked or damaged.
  • Rezistans dlo: Pwodwi sa a se pa enpèmeyabEvite ekspoze a dlo oswa imidite ki wo.

Depanaj

PwoblèmKòz posibSolisyon
Limyè bag la pa limen.No power, loose connection, or faulty USB port.Ensure the USB cable is securely plugged into a working power source. Try a different USB port or power adapter.
Light intensity is too low or too high.Brightness level is not set correctly.Use the '+' and '-' buttons on the control panel to adjust the brightness to your desired level.
Koulè klè pa dezirab.Incorrect color mode selected.Press the Color Mode button on the control panel to cycle through the three available color temperatures.
Phone holder is unstable or cannot hold the phone upright.Phone is too heavy or not properly secured; holder arm not tightened.Ensure the phone is centered and securely gripped by the holder. Adjust the flexible arm to balance the phone's weight. If the issue persists, consider using a lighter phone or an alternative phone stand.

Espesifikasyon

MakGrundig
Nimewo Modèl8711252245119
Koneksyon TeknolojiUSB
Entèfas MateryèlUSB
Dimansyon pwodwi (L x W x H)26L x 29W x 25H santimèt
Deskripsyon mòd FlashContinuously variable intensity, different light colors (3 modes)
Nivo klète11
Nivo rezistans dloPa enpèmeyab
Oto-revèyNon
Aparèy konpatibSmartphone
Anrejistreman odyoNon
Sa ki nan bwat la1x Ring Light Selfie

Enfòmasyon sou Garanti

This GRUNDIG Ring Light Selfie with Tripod comes with a 2-ane garanti from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual. Please retain your proof of purchase for warranty claims.

Sipò

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact GRUNDIG customer support. Refer to the product packaging or the official GRUNDIG websit pou detay kontak.

© 2024 GRUNDIG. Tout dwa rezève.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.