HOMPOW G90

HOMPOW G90 Car Jump Starter User Manual

Modèl: G90

Entwodiksyon

The HOMPOW G90 Car Jump Starter is a powerful and versatile device designed to jump start 12V vehicle batteries, including all gas engines and diesel engines up to 10L. Beyond its primary function, it also serves as a 20000mAh power bank with fast-charging capabilities and features an integrated LED flashlight for various utility purposes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your device.

HOMPOW G90 Car Jump Starter with accessories including smart jump cable, USB cables, AC adapter, and carrying case.

Image: The HOMPOW G90 Car Jump Starter unit, smart jump cables, various charging cables, an AC adapter, and a protective carrying case.

Enfòmasyon enpòtan sou sekirite

Please read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

  • This unit is designed for jump starting 12V car batteries only. Do not attempt to jump start vehicles with a higher battery rating or different voltage.
  • Do not try to restart the vehicle after three consecutive attempts if it doesn't start immediately. Wait for 1 minute to allow the unit to cool down.
  • Check your vehicle for other possible reasons why it cannot be restarted if the jump starter does not work.
  • For the first use, ensure the unit is fully charged.
  • In normal use, confirm the unit has at least 50% power before attempting a jump start.
  • The device incorporates 10 smart safety protections including reverse polarity, reverse charging, over-discharge, overcharging, reverse connection, short circuit, overheating, overload, spark resistance, and AI-Software Protection.
  • Kenbe aparèy la lwen dlo, imidite, ak tanperati ekstrèm.
  • Pa demonte oswa modifye inite a.
Diagram illustrating 10 smart safety protections of the HOMPOW G90 jump starter.

Image: Visual representation of the 10 smart safety protections, including No-Spark, Over-Charge, Reverse-Connection, Short-Circuit, Reverse-Polarity, Low-Temp, High-Temp, Over-Voltage, Over-Load, and AI-Software Protection.

Ki sa ki nan bwat la

Upon opening your HOMPOW G90 Car Jump Starter package, you should find the following items:

  • 1 x HOMPOW G90 Car Battery Jump Starter Unit
  • 1 x Extended Heavy-Duty Jumper Cable (Smart Jump Cable)
  • 1 x USB-A pou USB-C kab
  • 1 x USB-C pou USB-C kab
  • 1 x Adaptè AC 18W
  • 1 x ka pote
  • 1 x Manyèl Itilizatè (dokiman sa a)
Contents of the HOMPOW G90 Car Jump Starter box, including the main unit, smart cables, charging cables, AC adapter, and carrying case.

Image: All components included in the HOMPOW G90 Car Jump Starter package, neatly arranged with their respective labels.

Pwodwi souview ak Espesifikasyon

The HOMPOW G90 is a compact yet powerful device designed for emergency vehicle starting and portable power needs.

Karakteristik kle:

  • Powerful Jump Starter: 4000 Amps Peak Current, capable of starting 12V vehicles with all gas engines and up to 10L diesel engines. Can perform approximately 60 jump starts on a single charge.
  • Bank pouvwa 20000mAh: Equipped with 3 USB outputs (including one Type-C Quick Charge PD 60W port) to charge smartphones, tablets, and laptops up to 75% faster.
  • 60W Max Two-way Fast Charging: Bidirectional Type-C input/output port (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A) allows for a full charge in as little as 1.5 hours with a compatible 60W charger (18W AC adapter included, takes approx. 4.5 hours).
  • Super Large LED Screen: A 3.2-inch LED screen intuitively displays the unit's current working status and battery level.
  • Flach ki ap dirije: Features 3 modes: Flashlight, Strobe Light, and SOS Light, useful for emergencies, camping, ak aktivite deyò.
Detailed diagram of the HOMPOW G90 jump starter highlighting its components and ports, including the power button, LED screen, USB outputs, Type-C port, LED light, and jump start output.

Image: An annotated diagram showing the various parts and functions of the HOMPOW G90 unit, such as the Power Button, Super Large LED Screen, USB Outputs, PD 60W Type-C Output/Input, LED Light, and Jump Start Output.

Espesifikasyon teknik:

SpesifikasyonValè
MakHOMPOW
Nimewo ModèlG90
Kouran pwodiksyon pik4000 Amps
Kapasite batri20000mAh (approx. 96.2 Wh)
Dimansyon pwodwi8.9"H x 3.7"L x 1.6"P
Pwa atik1.5 liv (apeprè 1.53 liv)
Antre/Sòti (Tip-C)PD 60W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A)
USB Sòti 15V/2.1A
USB Sòti 2 (QC3.0)5V/3A, 9V/2A, 12V/1.5A
Tanperati Fonksyònman-4 ° F a 140 ° F (-20 ° C a 60 ° C)
Image showing the dimensions of the HOMPOW G90 jump starter compared to a laptop.

Image: The HOMPOW G90 unit displayed next to a laptop, illustrating its compact dimensions of 8.9 inches in length, 3.8 inches in width, and 1.7 inches in depth.

Enstalasyon ak Premye Chajman

Before first use, it is crucial to fully charge your HOMPOW G90 unit to ensure optimal performance and battery longevity.

  1. Connect the provided USB-C to USB-C cable or USB-A to USB-C cable to the Type-C input/output port on the jump starter.
  2. Connect the other end of the cable to the included 18W AC adapter.
  3. Ploge adaptè AC a nan yon priz estanda miray.
  4. The LED screen will display the charging progress. Allow the unit to charge until it reaches 100%.
  5. A full charge with the included 18W AC adapter takes approximately 4.5 hours. For faster charging, use a compatible PD 60W charger (not included), which can fully charge the unit in about 1.5 hours.

Nòt: Always ensure the unit has at least 50% charge before attempting to jump start a vehicle for reliable operation.

Enstriksyon Operasyon

A. Demaraj yon machin ak akonpayman

This unit is designed for jump starting 12V car batteries only (all gas engines, up to 10L diesel engines).

  1. Ensure the HOMPOW G90 unit has at least 50% charge.
  2. Turn off your vehicle's ignition and all accessories (headlights, radio, etc.).
  3. Konekte wouj (+) clamp of the smart jump cable to the positive (+) terminal of your vehicle's battery.
  4. Konekte nwa (-) clamp of the smart jump cable to the negative (-) terminal of your vehicle's battery.
  5. Insert the blue plug of the smart jump cable into the jump start output port on the HOMPOW G90 unit. Ensure it is fully inserted.
  6. The LED screen on the jump starter will indicate readiness. If there are any errors (e.g., reverse polarity), the unit's safety features will prevent operation, and the screen will display a warning.
  7. Demarre motè machin ou an.
  8. Once the vehicle starts, immediately disconnect the smart jump cable from the HOMPOW G90 unit.
  9. Apre sa, dekonekte klou nwa a (-)amp soti nan batri machin nan, ki te swiv pa wouj la (+) clamp.

Enpòtan: If the vehicle does not start immediately, wait for 1 minute before the next attempt. Do not try to restart the vehicle after three consecutive attempts as this may damage the unit. If the vehicle still doesn't start, consult a mechanic to check for other issues.

HOMPOW G90 jump starter connected to a car battery, ready to jump start.

Image: The HOMPOW G90 jump starter unit with its smart cables connected to a car battery, demonstrating its use for starting dead batteries.

B. Using as a Power Bank

The HOMPOW G90 can charge various electronic devices via its USB output ports.

  • Connect your device's charging cable to one of the USB output ports (USB 1, USB 2/QC3.0, or Type-C PD 60W) on the jump starter.
  • The unit will automatically begin charging your device. The LED screen will show "OUT" indicating power output.
  • Ou ka chaje jiska twa aparèy an menm tan.
HOMPOW G90 jump starter charging multiple electronic devices simultaneously.

Image: The HOMPOW G90 unit connected via cables to a smartphone, tablet, and laptop, demonstrating its capability as a 20000mAh power bank with 60W fast charging.

C. Using the LED Flashlight

Lanp pòch LED entegre a ofri twa mòd pou diferan sitiyasyon.

  • Pou limen flach la, peze epi kenbe bouton pouvwa a pandan kèk segonn.
  • Press the power button briefly to cycle through the modes:
    1. Flashlight (steady illumination)
    2. Strobe Light (rapid flashing)
    3. SOS Light (Morse code for SOS)
  • To turn off the flashlight, press and hold the power button again.
HOMPOW G90 jump starter's LED flashlight demonstrating its three modes: flashlight, strobe, and SOS, with examples de ka itilize.

Image: The HOMPOW G90 unit's LED flashlight in operation, showcasing its Flashlight, Emergency Strobe, and SOS modes, along with illustrative scenarios like camping, rescue lighting, outdoor trips, and emergency lighting.

Antretyen

Proper maintenance ensures the longevity and reliability of your HOMPOW G90 jump starter.

  • Chaj regilye: To maintain battery health, it is recommended to fully charge the unit every 3-6 months, even if not in use.
  • Depo: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection.
  • Netwayaj: Siye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
  • Swen kab: Inspect the smart jump cables for any damage (frayed wires, cracked insulation) before each use. Replace if damaged.

Depanaj

If you encounter issues with your HOMPOW G90, refer to the following common problems and solutions:

PwoblèmKòz posibSolisyon
Inite pa limen.Batri a dechaje nèt.Charge the unit fully using the provided AC adapter or a PD 60W charger.
Machin nan pa demarre apre yo fin eseye sote.Unit charge too low; incorrect connection; vehicle battery severely damaged; other vehicle issues.Ensure unit has >50% charge. Check cable connections (red to +, black to -). Wait 1 minute between attempts. If still no start after 3 attempts, consult a mechanic.
LED screen displays an error.Polarite envès, kous kout, oswa lòt pwoteksyon sekirite deklanche.Dekonekte clamps and re-check connections. Ensure correct polarity. If error persists, contact customer service.
Aparèy yo pa chaje nan pò USB yo.Unit battery low; incorrect cable; device not compatible.Charge the unit. Try a different USB cable. Ensure your device is compatible with the output specifications.

Sipò pou Kliyan

For any questions, concerns, or technical assistance regarding your HOMPOW G90 Car Jump Starter, please do not hesitate to contact our customer service team. Refer to the contact information provided on the product packaging or the official HOMPOW websit.

We are committed to providing excellent support and ensuring your satisfaction with our products.

© 2024 HOMPOW. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.