Tiandy TC-C34KS IR Dome Camera User Manual

1. Pwodwi souview

The Tiandy TC-C34KS IR Dome Camera is a high-performance surveillance device designed for reliable security monitoring. It features a 4-megapixel sensor capable of capturing video at up to 2560x1440 resolution at 25 frames per second. Constructed with a durable metal and plastic housing, this camera is equipped with a 1/2.7" CMOS sensor and a fixed 2.8mm lens, providing a wide field of view. Its infrared (IR) range extends up to 98.42 feet, ensuring clear night vision. Advanced features include tripwire and perimeter detection, a built-in microphone, and an SD card slot for local storage. The camera supports Power over Ethernet (PoE) and boasts IP66 and IK10 protection ratings, making it suitable for various indoor and outdoor environments.

2. Karakteristik kle

• Segondè rezolisyon: Captures video at up to 2560x1440 resolution at 25fps.
• Konstriksyon dirab: Features a robust metal and plastic housing.
• Advanced Sensor: Equipped with a 1/2.7" CMOS sensor for clear imaging.
• Lantiy gran ang: Fixed 2.8mm focus lens provides a broad surveillance area.
• Extended IR Range: Infrared illumination up to 98.42 feet (30 meters) for night vision.
• Smart Analytics: Supports tripwire and perimeter intrusion detection.
• Audio & Storage: Built-in microphone and MicroSD card slot (up to 512 GB) for audio recording and local storage.
• Pouvwa sou Ethernet (PoE): Simplifies installation by providing power and data over a single cable.
• Pwoteksyon anviwònman: IP66 rated for dust and water resistance, and IK10 rated for vandal resistance.

3. Espesifikasyon teknik

Desen dimansyon

4. Enstalasyon ak Enstalasyon

4.1 Kontni pake a

Verifye ke tout konpozan yo prezan nan pake a:

• Tiandy TC-C34KS IR Dome Camera
• Vis ak ploge miray pou monte
• Gid pou kòmanse rapidman (si li enkli)
• Waterproof Connector Kit (if included)

4.2 Monte Kamera a

1. Chwazi Kote: Choose a suitable mounting location, considering the desired field of view, lighting conditions, and network cable accessibility.
2. Prepare sifas: Use the provided mounting template (if available) or the camera base to mark the drilling points on the wall or ceiling.
3. Fè twou: Drill pilot holes for the mounting screws and insert wall plugs if mounting on masonry.
4. Baz sekirite: Attach the camera base securely to the mounting surface using the screws.
5. Ajiste ang: Loosen the adjustment screws to pan, tilt, and rotate the camera lens to the desired viewang ing. Sere vis yo yon fwa yo ajiste.

4.3 Koneksyon Rezo ak Kouran

1. Konekte kab Ethernet la: Connect an Ethernet cable from your PoE switch or PoE injector to the camera's RJ45 port. Ensure the connection is secure and waterproof if installed outdoors.
2. Pouvwa sou: The camera will power on automatically once connected to a PoE source. Allow a few minutes for the camera to boot up.
3. Aksè Inisyal: Use the manufacturer's IP search tool or a web browser to find the camera's IP address on your network. The default IP address or method to find it is usually provided in a separate quick start guide or on the camera's packaging.
4. Konekte: Jwenn aksè a kamera a web koòdone lè l sèvi avèk yon web browser. Enter the default username and password (refer to the quick start guide for default credentials). It is highly recommended to change the default password immediately for security reasons.

5. Operasyon Enstriksyon

This section outlines basic operation and configuration through the camera's web koòdone.

5.1 Viv View

Apre ou fin konekte nan web interface, navigate to the "Live View" section to see the real-time video feed from the camera. You can adjust stream quality and view options here.

5.2 Anviwònman Imaj

Access the "Image Settings" menu to configure parameters such as:

• Brightness, Contrast, Saturation, Sharpness: Adjust these to optimize image quality for your environment.
• WDR (Wide Range Dinamik): Enable Digital WDR for improved image clarity in scenes with both very bright and very dark areas.
• BLC (Backlight Compensation) / HLC (Highlight Compensation): Use these to improve visibility in specific lighting conditions.
• 3D DNR (Digital Noise Reduction): Reduces image noise, especially in low-light conditions.
• Mask konfidansyalite: Configure up to 4 regions to mask out sensitive areas from the video feed.
• Smart Defog: Improves image clarity in foggy or hazy conditions.

5.3 Video Analytics (Smart Features)

The camera supports advanced video analytics:

• Tripwire: Define a virtual line. An alarm is triggered when an object crosses this line in a specified direction.
• Perimèt: Define a virtual area. An alarm is triggered when an object enters or exits this area.

Configure these features in the "Event" or "Smart Analytics" section of the web interface. You can set up actions such as recording, sending notifications, or triggering alarms when these events occur.

5.4 Anrejistreman ak Depo

The camera supports local storage via a MicroSD card (up to 512 GB). Insert the MicroSD card into the designated slot (usually located under the dome cover). Configure recording schedules and event-triggered recording in the "Storage" or "Record" settings.

6. Antretyen

6.1 Netwayaj

Regularly clean the camera's lens and housing to ensure optimal performance. Use a soft, clean cloth. If necessary, dampen the cloth with a mild, non-abrasive cleaning solution. Avoid harsh chemicals that could damage the lens coating or housing material.

6.2 Mizajou Firmware

Periodically check the Tiandy official website for firmware updates. Firmware updates can provide new features, improve performance, and enhance security. Follow the instructions provided with the firmware update package carefully to avoid damaging the device.

6.3 Jesyon Modpas

Regularly change your camera's login password to a strong, unique password to prevent unauthorized access.

NAN. Depanaj

8. Garanti ak sipò

8.1 Enfòmasyon sou Garanti

Tiandy products typically come with a limited warranty. Please refer to the warranty card included with your product or visit the official Tiandy website for detailed warranty terms and conditions. The warranty period and coverage may vary by region and product type.

8.2 Sipò teknik

For technical assistance, product inquiries, or troubleshooting beyond this manual, please contact Tiandy customer support. You can usually find contact information (phone numbers, email, support portals) on the official Tiandy websit:

• Ofisyèl Websit: www.tiandy.com (Nòt: Sa a se yon espas rezève URL, please verify the actual support websit.)
• Portal sipò: Tcheke la website for a dedicated support section or FAQ.

When contacting support, please have your camera's model number (TC-C34KS) and serial number ready.