EVTSCAN Soil Tester User Manual

Entwodiksyon

This manual provides detailed instructions for the proper use and maintenance of your EVTSCAN Soil Tester. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolonged product life. This device is designed for measuring soil temperature, air temperature, air humidity, and illumination levels in various environments such as plants, gardens, lawns, and farms.

Pwodwi souview

The EVTSCAN Soil Tester is a portable device designed for quick and accurate environmental measurements. It features a clear display, easy-to-use buttons, and a durable probe.

Figi 1: Devan view of the EVTSCAN Soil Tester.

Karakteristik kle:

• Fasil pou itilize: Obtain test results quickly by inserting the probe into the soil.
• Mezi egzat: Designed for precise readings of environmental conditions.
• Fonksyon Blokaj Done: A dedicated HOLD button allows for convenient data viewing.
• Konsepsyon pòtab: Compact and lightweight for easy transport and use in various locations.
• Aplikasyon versatile: Suitable for family plants, gardens, lawns, and farms.

Enstalasyon

Enstalasyon batri:

1. Jwenn lòj batri a sou do aparèy la.
2. Louvri kouvèti lòj batri a.
3. Remove any packaging from the included 9V 6F22 dry battery.
4. Mete pil 9V la nan plas li, asire w ke polarite a kòrèk.
5. Fèmen kouvèti lòj batri a byen.

Figi 2: Kote konpatiman batri a ye.

Note: The device will not power on until the battery is correctly installed and any protective film is removed from the battery terminals.

Enstriksyon Operasyon

Kontwòl aparèy:

Figure 3: Control buttons on the EVTSCAN Soil Tester.

• Bouton ON/OFF:
  • Short press to turn the device on.
  • Long press for 3 seconds to turn the device off.
  • The device will automatically turn off after 15 minutes of inactivity to conserve battery life.
• Bouton ℃/℉:
  • Press this button to switch the temperature unit between Celsius (℃) and Fahrenheit (℉).
• Bouton HOLD:
  • Press this button to lock the current readings on the display. This is useful for recording data.
  • Press again to release the data lock and resume live readings.

Pran mezi:

1. Turn on the device by short pressing the ON/OFF bouton.
2. Insert the metal probe into the soil to approximately 2/3 of its length (about 14-15 cm or 5.5-6 inches). Ensure the probe is fully inserted into the root zone for accurate soil readings.
3. Position the device to face the sun for accurate illumination readings.
4. Wait a few moments for the readings to stabilize on the display. The display will show soil temperature, air temperature, air humidity, and illumination.
5. Si ou vle, peze la KENBE button to lock the displayed data for easier recording.
6. After use, gently remove the probe from the soil.

Figure 4: Probe length and recommended insertion depth.

Figi 5: Egzample of readings on the display.

Espesifikasyon

Antretyen

• Netwayaj: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. Do not immerse the main body of the device in water.
• Depo: Store the soil tester in a dry, cool place away from direct sunlight and extreme temperatures.
• Ranplasman batri: If the display becomes dim or the device does not power on, replace the 9V battery. Ensure proper disposal of old batteries according to local regulations.
• Evite enpak: Handle the device with care to prevent damage to the probe or internal components.

Depanaj

Garanti ak sipò

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EVTSCAN websit la. Kenbe resi acha ou kòm prèv acha.