Manyèl Enstriksyon pou Demaraj Machin Pòtab DBPOWER 1600A 18000mAh (Modèl DJS90)

1. Pwodwi souview

The DBPOWER DJS90 Portable Car Jump Starter is a versatile device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer essential lighting functions. It features a high peak current of 1600A and an 18000mAh battery capacity, capable of starting various 12V vehicles.

Figure 1: DBPOWER DJS90 Portable Car Jump Starter and included accessories.

Karakteristik kle:

• Vehicle Jump Starting: 1600A peak current for 12V vehicles (up to 7.5L gas / 5.5L diesel engines).
• Portable Power Bank: 18000mAh capacity with 2 USB outputs for charging smartphones, tablets, and other devices.
• Limyè ijans ki ap dirije: Features stable, strobe, and SOS signal modes.
• Pwoteksyon Sekirite: Heavy-duty smart clamps with low/high voltage, over-temperature, short-circuit, reverse polarity, and jump starter time-out protection.
• Dirab: Operates in temperatures from -4°F to 140°F.

2. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

Figure 2: What's in the Box - DBPOWER DJS90 Jump Starter and accessories.

• 1x DBPOWER DJS90 Jump Starter Unit
• 1x Intelligent Jumper Clamps
• 1x USB Line (Charging Cable)
• 1x manyèl itilizatè
• 1x Hard Shell Storage Case

3. Enstalasyon ak Chaje

Before initial use, fully charge the jump starter. It is recommended to recharge the device after each use to maintain optimal battery life.

Chaje Jump Starter la:

1. Locate the USB input port on the jump starter.
2. Connect the provided USB charging cable to the input port.
3. Plug the other end of the USB cable into a suitable USB power adapter (not included) or a car's USB port.
4. The LED display will indicate the charging progress. Ensure the device is fully charged before storing or using for jump-starting.

Figure 3: Multifunction ports on the DBPOWER DJS90.

4. Enstriksyon pou itilize: Demaraj yon machin ak yon aparèy pou ede w demarre

Always ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

Gid etap pa etap:

1. Prepare machin nan: Etenn ignisyon machin nan ak tout akseswa yo. Angaje fren pakin nan.
2. Connect Jumper Cables to Jump Starter: Open the protective flap on the jump starter and firmly insert the blue end of the intelligent jumper clamps into the car jump start output port.
3. Konekte Clamps pou batri: Tache klou wouj la (pozitif, +)amp to the positive terminal of the vehicle's battery. Attach the black (negative, -) clamp to the negative terminal of the vehicle's battery. Ensure a secure connection.
4. Tcheke Limyè Endikatè: The indicator light on the intelligent jumper clamps should turn solid green, indicating a safe and ready connection. If it flashes or shows a different color, refer to the troubleshooting section.
5. Kòmanse Veyikil la: Enter your vehicle and start the engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
6. Retire Clamps: Once the vehicle starts, immediately remove the black (negative) clamp from the vehicle battery, followed by the red (positive) clamp. Then, disconnect the jumper clamps soti nan starter la so.

Figure 4: Instructions to Start Your Vehicle.

5. Operating Instructions: Power Bank & LED Light

Sèvi ak kòm yon bank pouvwa:

The DJS90 can charge various electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports.
2. Demarè a ap kòmanse chaje aparèy ou an otomatikman.
3. The 18000mAh capacity can provide multiple charges for smartphones, tablets, and other small electronics.

Figure 5: Power Bank Capabilities.

Sèvi ak limyè ki ap dirije a:

The built-in LED light offers multiple modes for different situations.

1. Locate the power button for the LED light (often integrated with the main power button or a dedicated light button).
2. Press and hold the button to turn on the stable light mode.
3. Press the button again to cycle through strobe mode, SOS signal mode, and then off.

Figure 6: Four Lighting Modes.

6. Karakteristik sekirite

The DBPOWER DJS90 is equipped with intelligent jumper clampki bay plizyè pwoteksyon sekirite:

Figure 7: Smart Clamps Safety Protections.

• Ba/Segondè Voltage Pwoteksyon: Prevents damage from incorrect voltage nivo.
• Pwoteksyon sou Tanperati: Shuts down if the device gets too hot.
• Pwoteksyon Kout-Circuit: Anpeche domaj nan sikui kout aksidan.
• Pwoteksyon polarite ranvèse: Alèt epi anpeche operasyon si klouampyo konekte mal.
• Jump Starter Time-Out Protection: Automatically shuts off after a period of inactivity to conserve power.

7. Antretyen

• Rechaje regilyèman: For optimal performance and longevity, fully recharge the jump starter after each use and at least every three months if stored.
• Depo: Store the device in its hard shell case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Netwayaj: Wipe the unit and clamps with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.

NAN. Depanaj

• Machin nan pa ka demarre: Asire clamps are securely connected to the correct battery terminals. Check the jump starter's battery level. If the intelligent clamps' indicator light is not solid green, refer to the manual for specific error codes or try reconnecting.
• Jump Starter Not Charging: Verify the charging cable and adapter are working correctly. Ensure the charging port on the jump starter is clean and free of debris.
• Limyè ki ap dirije pa travay: Check if the jump starter is powered on. Press and hold the light button to activate.

9. Espesifikasyon

10. Garanti ak sipò

DBPOWER is committed to ensuring customer satisfaction. If you have any questions or require assistance with your product, please do not hesitate to contact our customer support team. We aim to respond to all inquiries within 24 hours.

For support, please visit the official DBPOWER websit la oubyen gade enfòmasyon kontak ki nan anbalaj pwodwi a.