ACEBEAM E75 Quad-Core High-Performance Rechargeable Flashlight

1. Entwodiksyon

Mèsi pou acha aasing the ACEBEAM E75 Quad-Core High-Performance Rechargeable Flashlight. This manual provides detailed instructions for the safe and proper use, maintenance, and troubleshooting of your new flashlight. Please read this manual thoroughly before operating the device and retain it for future reference.

Kontni pake:

• ACEBEAM E75 Flashlight
• Batri ityòm-ion rechargeable (enkli)
• USB Kalite-C Chaje Kab
• rezèv O-bag
• Lanyard
• USB-C Port Rubber Cover
• Manyèl itilizatè

Image 1: The ACEBEAM E75 flashlight shown with its included rechargeable battery, USB Type-C charging cable, and product packaging.

2. Pwodwi Features

• Equipped with 4 x High CRI 5000K Neutral White LEDs.
• Pwodiksyon maksimòm 3000 lumèn.
• Maximum beam throw of 260 meters.
• Powered by a high-capacity rechargeable Lithium-Ion battery.
• Integrated USB Type-C charging port with battery level indicator.
• Single side switch for intuitive control of six lighting modes, including a strobe function.
• Durable tempered glass lens with Anti-Reflective (AR) film plating for high light transmittance.
• Two-way body clip for versatile carrying options.
• Magnetic tail cap for hands-free attachment to metal surfaces.
• Constructed from aerospace-grade aluminum alloy with a premium Type III hard-anodized anti-abrasive finish.
• IP68 waterproof rating (submersible up to 2 meters).
• Impact resistance up to 1.5 meters.

Image 2: Visual representation of the ACEBEAM E75's quad-core high-performance output, highlighting its maximum throw distance and LED configuration.

3. Enstalasyon

3.1 Enstalasyon batri

1. Unscrew the tail cap of the flashlight counter-clockwise.
2. Insert the included Lithium-Ion battery with the positive (+) terminal facing towards the flashlight head.
3. Screw the tail cap back on clockwise until it is securely tightened. Ensure the O-ring is properly seated to maintain water resistance.

3.2 Premye chaj

It is recommended to fully charge the battery before first use to ensure optimal performance and battery longevity.

• Locate the USB Type-C charging port on the flashlight body, usually covered by a rubber flap.
• Gently lift the rubber cover to expose the port.
• Connect the provided USB Type-C charging cable to the flashlight and plug the other end into a USB power source (e.g., computer, wall adapter, power bank).
• The battery level indicator will show the charging status. Refer to the 'Charging' section for details on indicator behavior.
• Once charging is complete, disconnect the cable and firmly press the rubber cover back into place to seal the port, maintaining its waterproof integrity.

4. Operasyon Enstriksyon

4.1 Power On/Off

• Pou limen: Press and hold the side switch for approximately 0.5 seconds.
• Pou etenn: Press and hold the side switch for approximately 0.5 seconds when the flashlight is on.

4.2 Mode Switching (Brightness Levels)

• When the flashlight is on, single-click the side switch to cycle through the brightness levels: Ultra-Low → Low → Mid → High.
• The flashlight will memorize the last used brightness level (except for Strobe) and turn on at that level next time.

4.3 Turbo Mode

• From any mode (including off), double-click the side switch to activate Turbo mode (maximum output).
• Double-click again to return to the previous brightness level.

4.4 Strobe Mode

• From any mode (including off), triple-click the side switch to activate Strobe mode.
• Single-click to exit Strobe mode and return to the previous brightness level.

4.5 Lock/Unlock Function

• Pou fèmen: When the flashlight is off, press and hold the side switch for 3 seconds. The flashlight will flash twice to indicate it is locked.
• Pou déblotché: When the flashlight is locked, press and hold the side switch for 3 seconds. The flashlight will flash twice and then turn on at the Ultra-Low mode.
• The lock function prevents accidental activation during transport or storage.

4.6 Endikatè nivo batri

The indicator light on the side switch displays the battery status:

• Limyè vèt: Batri voltage is above 3.1V (sufficient power).
• Limyè wouj: Batri voltage is between 2.9V and 3.1V (low power, recharge soon).
• Limyè wouj kap flache: Batri voltage is below 2.9V (critical power, recharge immediately).

5. Chaje

The ACEBEAM E75 features a built-in USB Type-C charging port for convenient recharging of the included Lithium-Ion battery.

1. Ensure the flashlight is turned off before charging.
2. Open the rubber cover protecting the USB Type-C port.
3. Connect the USB Type-C cable to the flashlight and a suitable USB power source.
4. During charging, the indicator light on the side switch will glow red.
5. Yon fwa batri a konplètman chaje, limyè endikatè a ap vire vèt.
6. After charging, disconnect the cable and firmly close the rubber cover to maintain the flashlight's waterproof rating.

6. Antretyen

6.1 Netwayaj

• Netwaye kò flach la avèk yon twal mou,amp twal. Evite materyèl abrazif oswa pwodui chimik ki agresif.
• Kenbe lantiy la pwòp pou asire maksimòm limyè. Sèvi ak yon twal netwayaj lantiy si sa nesesè.
• Periodically clean the threads of the tail cap and apply a thin layer of silicone grease to maintain smooth operation and water resistance.

6.2 Ranplasman O-Ring

• Inspect the O-rings regularly for wear or damage.
• Replace worn O-rings with the provided spares to maintain the IP68 waterproof rating.
• Apply a thin layer of silicone grease to new O-rings before installation.

6.3 Swen Batri

• Store the flashlight with a partially charged battery if not used for extended periods.
• Recharge the battery every 3-6 months to prevent over-discharge and prolong battery life.
• If the flashlight will not be used for a long time, remove the battery to prevent potential leakage.

NAN. Depanaj

• Lanp lan pa limen:
  • Check if the battery is inserted correctly with the positive (+) terminal facing the head.
  • Asire bouchon ke a byen sere.
  • Charge the battery. The battery might be depleted.
  • Check if the flashlight is in lock mode. Unlock it by pressing and holding the side switch for 3 seconds.
• Limyè ki soti a fèb oswa li tranble:
  • Batri a ka fèb. Rechaje batri a.
  • Clean the battery contacts and flashlight contacts with a clean cloth.
• Dlo antre:
  • Asire bouchon ke a byen sere.
  • Tcheke bag tori yo pou wè si yo domaje oswa si yo pa byen chita. Ranplase yo si sa nesesè.
  • Ensure the USB Type-C port rubber cover is securely closed.

8. Espesifikasyon

9. Enfòmasyon sou Sekirite

• Do not shine the flashlight directly into eyes. The powerful beam can cause temporary vision impairment or permanent eye damage.
• Kenbe soti nan atenn timoun yo.
• Do not disassemble the sealed head of the flashlight, as this may damage the LEDs and void the warranty.
• Evite ekspoze flach la nan tanperati ekstrèm oswa nan limyè solèy dirèk pou peryòd pwolonje.
• Use only the recommended battery type and charging cable.
• Ensure the USB Type-C port cover is securely closed when not charging to maintain water resistance.

10. Garanti ak sipò

ACEBEAM products are manufactured with high-quality materials and craftsmanship. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ACEBEAM websit.

For technical support, service, or warranty claims, please contact ACEBEAM customer service or visit the official ACEBEAM store online:

Visit the ACEBEAM Store on Amazon