1. Entwodiksyon
Thank you for choosing the AstroAI Air Hawk Pro Cordless 20V Rechargeable Air Compressor. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and retain it for future reference.
This air compressor is designed for inflating various items such as car tires, bicycle tires, motorcycle tires, balls, and other inflatables. Its cordless design, fast inflation capabilities, and automatic shut-off feature make it a convenient tool for everyday use and outdoor activities.
2. Enfòmasyon sou Sekirite
AVÈTISMAN: Li tout avètisman ak enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv avètisman ak enstriksyon yo, sa ka lakòz chòk elektrik, dife ak/oswa blesi grav.
- Always wear eye protection when operating the air compressor.
- Kenbe timoun yo ak moun ki t ap pase yo lwen zòn operasyon an.
- Do not over-inflate items. Follow the recommended pressure for the item being inflated.
- Do not leave the air compressor unattended while in use.
- Ensure the air hose and nozzles are securely attached before operation.
- Pa sèvi ak konpresè a nan kondisyon mouye oswa toupre likid oswa gaz ki ka pran dife.
- Allow the compressor to cool down after extended use to prevent overheating.
- Store the device in a dry, secure place, out of reach of children.
3. Pake kontni
- AstroAI Air Hawk Pro Cordless Air Compressor
- Batri ityòm-ion rechargeable 20V
- Batri Charger
- DC12V Power Cable
- Air Hose with Snap-Button Nozzle
- 3 Additional Nozzles (e.g., needle adapter for balls, tapered adapter for inflatables, Presta valve adapter for bicycles)
- Sak Depo
- Manyèl Enstriksyon
Image: AstroAI Air Compressor, battery, charger, and various nozzles neatly stored in the included bag.
4. Pwodwi Features
- San fil ak pòtab: Powered by a 20V Lithium-ion battery for maximum portability. Also includes a DC12V power cable for alternative power supply.
- Enflasyon rapid: Capable of inflating a 195/65 R15 car tire from 0 to 36 PSI in approximately 5 minutes using battery power, or 8 minutes using the 12V DC connection. Maximum pressure of 160 PSI.
- Chaje rapid: The 20V 2.0Ah battery fully charges in approximately 1 hour. A single full charge can inflate up to four 195/65 R15 car tires.
- Durable Metal Cylinder: Features an internal metal cylinder design for enhanced durability, efficient heat dissipation, and a longer product lifespan.
- Otomatik fèmen: Automatically detects tire pressure and stops inflation once the preset pressure value is reached, preventing over-inflation.
- Digital LCD Display: Clear LCD screen displays both the preset and current pressure values.
- Plizyè inite presyon: Easily switch between BAR, KPA, and PSI units.
- Limyè ki ap dirije entegre: Provides illumination for use in low-light conditions or at night.
- Versatile Adapters: Includes various nozzles for inflating car tires, motorcycle tires, bicycle tires, sports balls, and other inflatables.
Image: The AstroAI Air Compressor in use, demonstrating its versatility for various inflation needs.
Imaj: Seksyon kwa view highlighting the durable metal cylinder for improved performance and longevity.
Image: Real-time digital display showing current and target pressure values.
5. Enstalasyon
5.1 Chaje batri a
- Connect the battery charger to a standard wall outlet.
- Mete pil ityòm-ion 20V la nan plato a.
- The indicator light on the charger will show the charging status. A full charge typically takes about 1 hour.
- Yon fwa konplètman chaje, dekonekte batri a soti nan plato a.
Image: The 20V Lithium-ion battery connected to its charger, illustrating the fast charging capability.
5.2 Attaching the Air Hose and Nozzle
- Screw the air hose securely onto the air outlet port of the compressor.
- Chwazi bouch ki apwopriye a pou atik ou vle gonfle a.
- Attach the selected nozzle to the end of the air hose.
Image: A selection of nozzles and adapters for diverse inflation needs.
6. Operasyon Enstriksyon
6.1 Powering On and Connecting
- Insert the charged 20V battery into the base of the air compressor. Alternatively, connect the DC12V power cable to your vehicle's 12V outlet and then to the compressor.
- Remove the valve cap from the item to be inflated.
- Firmly attach the air hose nozzle to the valve stem. Ensure a tight seal to prevent air leakage.
6.2 Setting Desired Pressure
- Press the power button to turn on the compressor. The LCD screen will display the current pressure.
- Use the 'M' button to cycle through pressure units (PSI, BAR, KPA). Select your desired unit.
- Use the '+' and '-' buttons to set your target pressure.
6.3 Kòmanse ak sispann enflasyon an
- Once the target pressure is set, press the inflation button to start the compressor.
- Konpresè a ap sispann otomatikman yon fwa presyon predetèmine a rive.
- If you need to stop inflation manually, press the inflation button again.
- Disconnect the nozzle from the valve stem and replace the valve cap.
Image: Step-by-step visual guide for operating the air compressor.
7. Antretyen
- Netwayaj: Wipe the exterior of the compressor with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no water enters the internal components.
- Depo: Store the air compressor and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Swen batri: For optimal battery life, charge the battery fully before storing for extended periods and recharge every 3-6 months if not in use.
- Enspeksyon Tiyo ak Bouch: Regularly check the air hose and nozzles for any signs of wear, cracks, or damage. Replace if necessary to ensure proper sealing and performance.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Konpresè a pa limen. | Battery is not charged or not properly inserted. DC12V cable not connected. | Ensure battery is fully charged and securely inserted. Check DC12V cable connection. |
| Compressor kouri men li pa gonfle. | Air hose or nozzle not securely attached. Leak in the hose or nozzle. Valve stem is faulty. | Check all connections for tightness. Inspect hose and nozzles for damage. Check the item's valve stem. |
| Inflation is slow. | Low battery charge. Small leak in connection. | Recharge the battery. Ensure all connections are tight. |
| Compressor fè bwi. | Normal operation for air compressors. | Air compressors typically produce noise during operation. This is generally not a fault. Consider using in an appropriate environment. |
| Konpresè a chofe twòp epi li fèmen. | Itilizasyon kontinyèl pwolonje. | Allow the compressor to cool down for at least 10-15 minutes before resuming operation. Avoid continuous use for more than 20 minutes. |
9. Espesifikasyon
- Mak: Astro AI
- Nimewo Modèl: JY16P160-18
- Dimansyon pwodwi: 17 x 8 x 24 cm
- Pwa pwodwi: 1.94 kg
- Koulè: Jòn
- Sous pouvwa: Battery Powered (20V Lithium-ion) / DC12V
- Voltage: 20 Volts
- Presyon maksimòm: 160 psi
- Kalite batri: Lityòm-ion
- Karakteristik espesyal: Quick Inflation, Cordless, Automatic Shut-off, LED Light
- Itilizasyon Rekòmande: Tire pressure for cars, motorcycles, bicycles, balls, and other inflatables.
10. Garanti ak sipò
AstroAI products are designed and manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official AstroAI website. If you encounter any issues or have questions regarding your AstroAI Air Hawk Pro Cordless 20V Rechargeable Air Compressor, please contact AstroAI customer support for assistance.
Ou ka jwenn plis enfòmasyon ak enfòmasyon pou kontakte yo sou AstroAI Store on Amazon.