Victoper TG-TD14805

Victoper 9-LED Rechargeable Headlamp Manyèl itilizatè

Model: TG-TD14805 | Brand: Victoper

Entwodiksyon

Thank you for choosing the Victoper 9-LED Rechargeable Headlamp. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your headlamp. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Pwodwi souview

The Victoper 9-LED Rechargeable Headlamp is designed for various outdoor and indoor activities, offering powerful illumination and versatile features.

Karakteristik kle:

  • Super Bright Ekleraj: Equipped with 9 high-quality LED bulbs, providing 3500 lumens and over 300 meters of visibility.
  • Batri ki dire lontan: Built-in rechargeable battery with Type-C charging, offering 3 to 9 hours of use.
  • 10 mòd ekleraj: Includes strong/weak main light, 8-LED mode, all lights on, red light, and red light strobe.
  • Fonksyon Capteur Mouvman: Four motion detector modes allow for easy on/off control with a hand wave.
  • Lejè & Konfòtab: Weighs only 90g with an elastic, non-slip, and adjustable headband for a comfortable fit.
  • Dirab ak enpèmeyab: IPX4 waterproof rating, suitable for outdoor activities in various weather conditions.
  • Ang travès reglabl: Head can be adjusted up to 60° to direct light as needed.

Eleman:

Victoper 9-LED Rechargeable Headlamp with charging cable and hand gesture sensor demonstration.
Figure 1: Victoper 9-LED Rechargeable Headlamp, showing the main unit, USB-C charging cable, and an illustration of the hand gesture sensor.

Headl laamp pake gen ladann headl laamp unit and a USB Type-C charging cable.

Diagram showing the components of the Victoper Headlamp: Power Button, Sensor Button, Power Display, Type-C Charging Port, Adjustable Headband.
Figi 2: Detaye view nan tèt laamp highlighting its main parts: Power Button, Sensor Button, Power Display, Type-C Charging Port, and Adjustable Headband.
  • Bouton pouvwa: Controls power on/off and cycles through normal lighting modes.
  • Bouton Capteur: Activates/deactivates the motion sensor mode.
  • Ekspozisyon pouvwa: LED indicators showing battery charge level.
  • Kalite-C chaje pò: Pou rechaje batri entegre a.
  • Bando reglabl: Elastic and comfortable, designed for a secure fit on various head sizes.

Enstalasyon

Premye chaj:

  1. Anvan premye itilizasyon an, chaje tèt la nèt.amp.
  2. Connect the provided USB Type-C cable to the charging port on the headlamp.
  3. Plug the other end of the cable into a compatible USB power source (e.g., wall adapter, computer, power bank).
  4. The power display LEDs will indicate charging status. Once all LEDs are solid, the headlamp se konplètman chaje.

Ajiste Bando a:

  • Mete tèt laamp sou tèt ou.
  • Adjust the elastic straps to ensure a snug yet comfortable fit. The headband is designed to be non-slip.

Ajiste Angle Travès:

Person wearing Victoper headlamp, demonstrating 60-degree adjustable rotation.
Figi 3: Tit laamp unit can be tilted up to 60 degrees to adjust the light beam direction.

Headl laamp unit can be manually tilted up to 60 degrees to direct the light beam precisely where needed for your activity.

Enstriksyon Operasyon

Power On/Off and Normal Modes:

  1. Peze a Bouton pouvwa once to turn on the headlamp.
  2. Près ki vin apre nan la Bouton pouvwa will cycle through the white light modes:
    • Strong White Light (TG3)
    • Weak White Light (TG3)
    • 8 LED White Light
    • TG3 + 8 LED White Light (All lights on)
  3. To activate red light modes, press and hold the Bouton pouvwa pou 2 segonn:
    • Limyè Wouj
    • Limyè wouj stroboskopik
  4. Pou fèmen headl laamp, kontinye peze bouton an Bouton pouvwa until it cycles off, or press and hold the Bouton pouvwa for 2 seconds from any white light mode.
Diagram illustrating the 10 light modes of the Victoper Headlamp, including strong white, weak white, 8 LED, all lights on, and red light/strobe.
Figi 4: Plis paseview of the 10 available lighting modes, including cycle modes and long-press options for red light.

Mòd Capteur Mouvman:

  1. Peze a Bouton Capteur (usually located next to the power button) to activate the motion sensor mode.
  2. In sensor mode, you can turn the light on or off by waving your hand in front of the headlampCapteur a.
  3. Peze a Bouton Capteur again to deactivate the motion sensor mode and return to normal operation.

Antretyen

Chaje:

Rechaje headl laamp when the power display indicates low battery. Use the provided USB Type-C cable for charging. It can be charged via various USB power sources.

Diagram showing various USB charging methods for the Victoper Headlamp, including charger, laptop, car charger, and power bank.
Figi 5: Tit laamp supports USB-C charging from various sources like wall chargers, laptops, car chargers, and power banks. Always use the provided cable to avoid voltage pwoblèm.

Important: To avoid battery damage caused by voltage issues, please use the charging cable provided with this product for charging.

Netwayaj:

  • Siye tèt laamp body with a soft, damp twal.
  • Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
  • Ensure the charging port cover is securely closed to maintain IPX4 waterproof rating.
Victoper Headlamp being splashed with water, demonstrating IPX4 waterproof rating.
Figi 6: Tit laamp is IPX4 waterproof, protecting it from splashing water from any direction.

Depo:

  • Sere tèt laamp nan yon kote ki fre, sèk lwen limyè solèy la dirèk.
  • If storing for an extended period, charge the battery every 3-6 months to maintain battery health.

Depanaj

PwoblèmKòz posibSolisyon
Headlamp pa limen.Batri ap vide.Chaje headl laamp fully using the provided USB-C cable.
Limyè a fèb oswa li ap tranble.Batri ki ba.Rechaje headl laamp.
Capteur mouvman an pa fonksyone.Sensor mode not activated or obstructed.Press the Sensor Button to activate. Ensure nothing is blocking the sensor. Try waving your hand closer to the sensor.
Headlamp pa chaje.Kab oswa sous kouran ki defektye.Ensure the USB-C cable is properly connected. Try a different USB power source or a different USB-C cable (preferably the original).

Espesifikasyon

KarakteristikDetay
MakVictorè
Nimewo ModèlTG-TD14805
Kalite sous limyèLED (9 LED)
Flux lumineux3500 Lumen
Distans gwo bout bwaJiska 300 mèt
Mod ekleraj10 (including white light, 8-LED, all lights, red light, red strobe)
Karakteristik espesyalAdjustable, Lightweight, Rechargeable, Motion Sensor
Evalyasyon ki enpèmeyabIPX4
Sous pouvwaBattery Powered (1 Lithium-polymer battery included)
Lavi batri3-9 èdtan (selon mòd la)
Port chajeUSB Kalite-C
Dimansyon pwodwi (L x W x H)7.5 x 4.5 x 4.5 cm (apeprè 2.95 x 1.77 x 1.77 pous)
Pwa atik90 gram (apeprè 3.17 ons)
Ang reglabl60 degre

Garanti ak sipò

Information regarding product warranty and availability of spare parts is not explicitly provided in the product details. For any support inquiries, warranty claims, or questions about spare parts, please contact Victoper customer service directly through their official websit entènèt la oubyen magazen kote ou te achte pwodwi a.

Please retain your proof of purchase for any warranty-related claims.

© 2024 Victoper. All rights reserved.

Manyèl sa a se pou rezon enfòmasyon sèlman. Espesifikasyon yo ka chanje san avètisman.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.