Shutao STC-3028
STC-3028 24V Temperature & Humidity Controller User Manual
Model: STC-3028 (13443ST-1)
Brand: Shutao
Pwodwi souview
The STC-3028 is a versatile 24V temperature and humidity controller designed for precise environmental management. It features a dual digital display for simultaneous monitoring of temperature and humidity, making it ideal for applications such as incubators, terrariums, and other controlled environments. This device supports both heating/cooling and humidifying/dehumidifying functions.
Image: The STC-3028 controller unit with its integrated temperature and humidity sensor. The controller features a dual digital display showing temperature in red and humidity in blue.
Espesifikasyon teknik
| Spesifikasyon | Valè |
|---|---|
| Antre Voltage | AC 24V |
| Mezire Ranje Tanperati | -50°C pou +110°C |
| Mezire Imidite Range | 00%RH to +100%RH |
| Presizyon Tanperati | ±1°C |
| Presizyon imidite | ± 0.1% RH |
| Relay Output Contact Capacity | 10A/240VAC |
| Kalite ekspozisyon | Digital |
| Materyèl | Plastik |
| Dimansyon (L x W x H) | 75mm x 85mm x 27mm (apeprè 2.95 pous x 3.34 pous x 1.06 pous) |
| Pwa atik | 0.48 ons (apeprè 0.03 lbs) |
Image: Diagram showing the dimensions of the STC-3028 controller: 75mm (2.95 inches) length, 85mm (3.34 inches) width, and 27mm (1.06 inches) height.
Kontni pake
Pake a gen ladan atik sa yo:
- 1 x STC-3028 Temperature and Humidity Controller
- 1 x Integrated Sensor (for temperature and humidity measurement)
Enstalasyon ak Enstalasyon
Dyagram fil elektrik
Proper wiring is crucial for the safe and correct operation of the STC-3028 controller. Refer to the diagram below for connection details.
Image: A visual representation of the STC-3028 wiring diagram. It shows terminals for power supply (1-2), humidity sensor (3-5), and output relays for temperature (6-7) and humidity (8-9). The diagram also indicates voltage options (110-220VAC, 12V, 24V) and important notes regarding distinguishing interfaces and maintaining proper wire distance.
Nòt enpòtan:
- Strictly distinguish the interface of the relay, sensor, and power supply.
- Strictly distinguish the connection of the sensor and power supply.
- The sensor down-lead and power wire should be kept a proper distance apart to avoid interference.
- Asire vol ki kòrèk latage (24V) is supplied as indicated on the unit.
Montaj
The STC-3028 is designed for panel mounting. Ensure adequate space for ventilation, especially around the heat dissipation grids on the sides of the unit.
Image: The STC-3028 controller with a visual representation of air flowing through its side vents, indicating effective heat dissipation. The image highlights the cooling grid design for efficient cooling.
Enstriksyon Operasyon
Setting Startup Temperature/Humidity
- Peze a "up" button once to display the current starting temperature or humidity setting.
- Long peze la "up" bouton an pou apeprè 3 segonn jiskaske ekran an flache.
- Sèvi ak la "up" epi "down" keys to adjust the desired starting temperature or humidity value.
- The setting will automatically save after a few seconds of inactivity or by pressing another button.
Setting Stop Temperature/Humidity
- Peze a "down" button once to display the current stop temperature or humidity setting.
- Long peze la "down" bouton an pou apeprè 3 segonn jiskaske ekran an flache.
- Sèvi ak la "up" epi "down" keys to adjust the desired stop temperature or humidity value.
- The setting will automatically save after a few seconds of inactivity or by pressing another button.
Temperature/Humidity Correction (Calibration)
To correct or calibrate the temperature and humidity readings:
- Peze a "up" epi "down" bouton an menm tan.
- Follow the on-screen prompts to adjust the offset for temperature or humidity. Refer to the product's advanced settings for detailed calibration procedures if available.
Antretyen
- Netwayaj: Regularly wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Swen Capteur: Keep the integrated sensor clean and free from dust or debris to ensure accurate readings. Avoid exposing the sensor to extreme physical shock or moisture beyond its operating range.
- Vantilasyon: Ensure the ventilation grids on the sides of the unit are not obstructed to allow for proper heat dissipation.
- Dekoneksyon pouvwa: Always disconnect power before performing any maintenance or wiring adjustments.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ekran an montre "LLL" oswa "HHH" | Sensor error, sensor disconnected, or reading out of range. | Check sensor connection. Ensure sensor is within operating temperature/humidity range. Replace sensor if damaged. |
| Aparèy pa limen | Pa gen ekipman pou kouran, vòltaj ki pa kòrèktage, or faulty wiring. | Verify power connection and ensure 24V AC supply. Check wiring according to the diagram. |
| Output relay not activating | Settings incorrect, or relay faulty. | Review startup and stop settings. Ensure the measured value is outside the set range to trigger the relay. Check relay wiring. |
| Lekti kòrèk | Sensor dirty, sensor interference, or needs calibration. | Clean the sensor. Ensure sensor wires are kept separate from power wires. Perform temperature/humidity correction. |
Garanti ak sipò
For warranty information and technical support, please contact Shutao customer service. Keep your purchase receipt as proof of purchase.
Contact information may be available on the product packaging or the manufacturer's official websit.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.